期刊文献+

基于应力平衡法的系杆拱桥吊杆力的优化 被引量:8

Optimization for hanger forces of tied-arch bridges based on stress balanced method
原文传递
导出
摘要 针对系杆拱桥的特点,提出了基于应力平衡法的确定合理吊杆力的方法.该方法的思路是以恒载作用下拱肋的截面上下缘的应力为控制条件,从而给出恒载作用下拱肋截面应力和弯矩的可行域.提出单位荷载法,以恒载作用下拱肋截面弯矩的可行域为目标,以吊杆力为变量,采用最小二乘法原理,确定合理的吊杆力,并指出为加快收敛速度可采用拱肋的最小弯曲应变能原理确定吊杆力的初始值.通过一算例验证了该算法的可行性.研究表明:采用该法可以使得拱肋截面弯矩位于拱肋截面弯矩可行域内,可确定合理吊杆力,并能使整个拱梁组合结构的受力状态处于最优状态. Aiming at the mechanical behavior of tied-arch bridges, a new method based on stress balanced method is put forward to optimize the hanger forces. The method followed the idea that the normal stresses on the top and bottom of arch rib section under dead load are controlling condition and the feasible regions of the dead stress and moment are deduced. A unit-load method is put forward; and the least square principle-based optimal method uses the feasible region of moment distribution under dead load as an objec- tive and the hanger forces as optimized variables and then was adopted to optimize hanger forces. In order to accelerate the convergence, the initial value of the hanger forces can be determined by the minimum ben- ding energy of the arch rib. The optimization theory is examined by a case study. The results indicate that the arch rib section moment meets the feasible region by the above method to optimize the hanger forces; and the tie-arch bridges can reach the optimal state.
作者 孙志伟 邬晓光 SUN Zhiwei WU Xiaoguang(College of Highway Engineering, Chang'an University, Xi'an 710064, China)
出处 《武汉大学学报(工学版)》 CAS CSCD 北大核心 2017年第5期704-707,713,共5页 Engineering Journal of Wuhan University
基金 国家自然科学基金项目(编号:50908017) 中央高校基本科研业务费专项资金项目(编号:2014G3212002)
关键词 桥梁工程 系杆拱 吊杆力 应力平衡法 优化 bridge engineering tied-arch bridges hanger forces stress balanced method optimization
作者简介 孙志伟(1984-),男,博士研究生,主要从事桥梁结构理论和桥梁维修加固研究,E-mail:120169927@qq.com. 通讯作者:邬晓光(1961-),男,教授、博士生导师,研究方向为大跨度桥梁结构分析、施工控制、养护和维修加固,E—mail:269728221@qq.com.
  • 相关文献

参考文献10

二级参考文献60

共引文献334

同被引文献116

引证文献8

二级引证文献93

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部