摘要
针对国内光谱共焦传感器校准方法不统一、计量特性难以比较等问题,提出3种基于精密标准器的光谱共焦传感器校准方法,并基于此开展校准和计量特性评定。分别采用精密位移台、高精度测长仪与激光干涉仪3种标准器对光谱共焦传感器的基本误差、线性度、重复性、回程误差等参数进行校准,3种方法所测某种光谱共焦传感器的最大误差分别为2.76,3.40,1.17μm,线性度分别为0.689%,0.850%,0.293%,重复性分别为1.463,1.324,0.787μm,回程(迟滞)误差为0.51μm。校准结果表明:所提出的3种计量特性校准方法是有效的,光谱共焦位移传感器计量特性满足使用要求,其中,激光干涉校准法精度最高且可靠。研究成果有助于提高彩色光谱共焦位移传感器校准效率和可靠性,并为大尺寸玻璃平面度的高精度测量提供坚实的技术支撑。
Aiming at the problems of inconsistent calibration methods and difficult evaluation of metrology characteristics for domestic spectral confocal sensors,three kinds of calibration methods were developed and applied to the measurement of metrology characteristics for the sensors.The characteristics,such as basic error,linearity,repeatability and hysteresis error,were evaluated respectively for a certain of spectral confocal sensor by using precision displacement platform,length-measuring machine and laser interferometer.The maximum basic errors were respectively 2.76,3.40,1.17μm within the measurement range.The linearity was 0.689%,0.850%respectively,0.293%.The repeatability was 1.463,1.324,0.787μm respectively.And it was 0.51μm for the hysteresis error with laser interferometer.The results showed that the three calibrations wee valid,and the accuracy of the calibrated spectral confocal sensor could meet the requirement.The calibration methods changed with the different measurement needs,of which the calibration accuracy and correctness by using laser interferometer was highest and reliable.The study was very helpful to improve the calibration efficiency and reliability of spectral confocal displacement sensors,and would also provide an experimental basis for the development and improvement of the flatness measurement of large-scale glass.
作者
闫勇刚
刘志浩
朱小平
杜华
李加福
王耿
YAN Yonggang;LIU Zhihao;ZHU Xiaoping;DU Hua;LI Jiafu;WANG Geng(School of Mechanical&Power Engineering,Henan Polytechnic University,Jiaozuo454000,Henan,Chin;National Institute of Metrology,Beijing100029,China)
出处
《河南理工大学学报（自然科学版）》
CAS
北大核心
2021年第5期117-123,共7页
Journal of Henan Polytechnic University（Natural Science）
基金
国家自然科学基金资助项目(51775174)
河南省高校基本科研业务费专项资金资助项目(NSFRF80332)
河南省科技攻关项目(212102210323,202102210082)。
关键词
计量学
光谱共焦位移传感器
校准
非接触测量
误差分析
metrology
spectral confocal displacement sensor
calibration
non-contact measurement
error analysis
作者简介
第一作者:闫勇刚(1977-),男,河南孟州人,博士,讲师,主要从事光学精密测量、视觉测量等方面的教学和研究工作。Email:yonggang_yan@hpu.edu.cn;通讯作者:王耿(1984-),男,河南南阳人,博士,副教授,主要从事精案测量与控制方面的教学和研究工作。Email:wanggeng@hpu.edu.cn。
