期刊文献+

四官能度过氧化物引发制备高抗冲聚苯乙烯 被引量:3

Preparation of high impact polystyrene initiated with a tetrafunctional peroxide
在线阅读 下载PDF
导出
摘要 引言 高抗冲聚苯乙烯(HIPS)可通过顺丁橡胶(PB)接枝苯乙烯共聚制备,相比通用聚苯乙烯(GPPS),其抗冲性能高、拉伸形变大,但这些性能受HIPS分子量及分布、接枝效率、橡胶粒子形态及大小的影响很大。制备时可改变剪切速率、橡胶类型及用量、引发剂用量来调节产物分子量及分布、接枝效率、橡胶粒子形态及大小, The synthesis of high impact polystyrene(HIPS)with the usage of a tetrafunctional peroxide initiator was investigated.The polymerization performance of a commercial initiator polyether poly-t-butylperoxy carbonate(JWEB50)was compared with that of its monofunctional counterpart,tert-butyl(2-ethylhexyl)monoperoxycarbonate(TBEC).It was shown that the polymerization kinetic curves completely overlapped at the same polymerization temperature when the molar concentrations of were equal for these two initiators.And the higher the molecular weights,the equal polymerization rate could be obtained simultaneously by tetrafuctional JWEB50 compared to monofuctional TBEC under the same other conditions.The effect of polymerization temperature on molecular weight of HIPS prepared with JWEB50 or TBEC was investigated.It suggested that the molecular weight changed slower with the increase of polymerization temperature for JWEB50,compared to TBEC.That meant the molecular weight-increasing effect of JWBE50 would be more pronounced at high polymerization temperatures.The effect of initiator type on graft efficiency was also studied.At the same molar concentration of initiator,it was found that the graft efficiency was dramatically improved with the usage of JWEB50.It was also shown that the graft efficiency increased with the increase of polymerization temperature,but decreased with the increase of conversion.And the evolutions of viscosity during the preparation of HIPS recorded on-line by rotation rheometer(HAAKE RS6000)were very similar for these two initiators when the molar concentrations of were equal.The two viscosity versus time curves completely overlapped with each other.And the phase inversion turned out to be flat in the curves.The phase inversion flats for both initiators were found to occur at a monomer conversion range around 18%—25%.
出处 《化工学报》 EI CAS CSCD 北大核心 2011年第9期2663-2667,共5页 CIESC Journal
关键词 高抗冲聚苯乙烯 四官能度过氧化物 接枝效率 相反转 high impact polystyrene tetrafunctional peroxide graft efficiency phase inversion
作者简介 曹锐鑫(1986-),女,硕士研究生。 联系人:单国荣。
  • 相关文献

参考文献1

  • 1Sosa J M,Park D,Blackmon K P.Use of tetrafunctionalinitiators to improve the rubber phase volume of HIPS. US,0113525A1 . 2005

同被引文献57

  • 1刘勇,黄志宇,陆屹,崔浩.自由基聚合引发剂研究进展[J].化工时刊,2005,19(3):35-39. 被引量:15
  • 2王俊,祁黎,彭坚,黎丽丽.在模拟户内环境下聚苯乙烯颜色变化的老化模型及预估[J].塑料,2005,34(3):96-99. 被引量:4
  • 3江艳,沈怡,武培怡.ATR-FTIR光谱技术在聚合物膜研究中的应用[J].化学进展,2007,19(1):173-185. 被引量:22
  • 4Myer Kutz. Handbook of Environmental Degradation of Materials// James A Harvey. Lifetime Predictions of Plastics[M]. 2nd ed. New York: William Andrew Publishing, 2012:65-77.
  • 5Wypyeb G Handbook of Material Weathering[M]. 5th ed. Canada: Chem. Tee. Publishing, 2013:288-305.
  • 6Sousa AR, Amorim K L E, Medeiros E S, Me'lo T J A, Rabello M S. The combined effect of photodegradation and stress cracking in polystyrene [J]. Polymer Degradation and Stability, 2006, 91(7): 1504-1512.
  • 7YangShujun(杨书君).Fest study on emitting-pipe aging[D]. Handan:Hebei University of Engineering, 2007.
  • 8ZhangZhiyong(张志勇).GB/T14522-2008.Accelerated weatheringt method for plastics, coatings and rubber materials used for chinery industrial products[S]. Beijing: China Standards Press, 2008.
  • 9FuZizheng(付自政).Study on the preparation and accelerated agingproperties of wood flour/high-density polyethylene composites[D]. Wuhan: Huazhong Agricultural University, 2009.
  • 10HuangXue(黄雪),LiuPing(刘萍),CaiShaoling(蔡少龄),LiJianhua(李建华),ZhangXiaojian(张晓建),DingJiayi(丁怡).GB/T8168-2008. Testing method of static compression for packaging cushioning materials[S]. Beijing: China Standards Press, 2008.

引证文献3

二级引证文献26

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部