云南某贫细硫化铜矿石选矿工艺优化研究

Study on Optimization of Beneficiation Process of a Lean and Fine Copper Sulfide ore in Yunnan

在线阅读下载PDF

导出

摘要云南某低品位细粒嵌布的铜矿石铜、硫品位分别为0.161%和9.704%,有价铜矿物嵌布粒度细,铜硫分离富集难度较大。为实现该硫化铜矿石资源的高效开发利用,在选厂原选矿流程及原矿工艺矿物学研究基础上,进行了系统的磨浮试验。结果表明:矿石采用磨矿—1粗2扫铜硫混合浮选—混浮粗精矿再磨—1粗3精2扫铜硫分离浮选闭路流程处理,可获得铜品位14.69%、铜回收率63.15%的铜精矿,硫品位29.16%、硫回收率75.10%的硫精矿,试验铜精矿品位较现场提高近3个百分点,铜回收率提高15个百分点以上,显著优于现场生产指标,达到了理想的综合回收铜硫效果。研究结果可作为工艺流程优化的依据。 The copper and sulfur grades of a low-grade fine-grained dissemination copper ore in Yunnan are 0.161%and 9.704%,respectively.The dissemination size of valuable copper minerals is fine,and the separation and enrichment of copper and sulfur is difficult.In order to realize the efficient development and utilization of the copper sulfide ore resources,a systematic grinding and flotation test was carried out on the basis of the ore dressing plant original beneficiation process and the raw ore process mineralogy study.The results show that the copper concentrate with copper grade of 14.69%and copper recovery of 63.15%,the sulfur concentrate with sulfur grade of 29.16%and sulfur recovery of 75.10%can be obtained by the closed-circuit process of grinding-1 roughing 2 scavenging copper sulfur mixed floatation-regrinding of mixed flotation coarse concentrate-1 roughing 3 cleaning 2 scavenging copper sulfur separation flotation.The grade of copper concentrate in the test is nearly 3 percentage points higher than that in the field,and the copper recovery rate is increased by more than 15 percentage points,which is significantly better than the field production index,and the ideal comprehensive recovery of copper and sulfur is achieved.The research results can be used as the basis for process optimization.

作者田小松赵志强赵洵梁泽跃戴惠新王飞旺 TIAN Xiaosong;ZHAO Zhiqiang;ZHAO Xun;LIANG Zeyue;DAI Huixin;WANG Feiwang(Faculty of Land Resources Engineering,Kunming University of Science and Technology,Kunming 650000,China;Yunnan Diqing Mining Development Co.,Ltd.,Diqing 674400,China;State Key Laboratory of Mineral Processing,Beijing 100000,China;Yunnan Province Engineering Research Center for Reutilization of Metal Tailings Resources,Kunming 650000,China)

机构地区昆明理工大学国土资源工程学院云南迪庆有色金属有限责任公司矿物加工科学与技术国家重点实验室云南省金属矿尾矿资源二次利用工程研究中心

出处《金属矿山》 CAS 北大核心 2024年第6期138-144,共7页 Metal Mine

基金国家自然科学基金项目(编号:52364033) 矿物加工科学与技术国家重点实验室开放基金项目(编号:BGRIMM-KJSKL-2023-12)。

关键词高硫贫细硫化铜矿石铜硫混浮混合精矿再磨铜硫分离浮选 high sulfur lean fine copper sulfide ore copper sulfur mixed flotation regrinding of mixed concentrate copper sulfur separation flotation

分类号 TD923 [矿业工程—选矿] TD952 [矿业工程—选矿]

作者简介田小松(1984-),男,高级工程师,博士研究生;通信作者:王飞旺(1990-),男,讲师,博士研究生。