摘要
工业化生产实验室工作台面专用环氧树脂复合板的工艺过程分为配料、真空浇注、固化成型三步。结果表明:配料阶段的温度为70℃左右,模具采用经哑光表面处理的不锈钢板,模具温度控制在65~70℃。固化成型最佳条件为:85℃固化2 h,125℃固化1 h,150℃固化4 h。选择合适的设备和工艺流程,生产的环氧树脂台面性能达到实验室的应用标准。
The industrialized production of specialty epoxy resin composite sheet used for laboratory working surface can be divided into three steps which include batching,vacuum casting,and curing molding.The research shows that the optimum operating conditions are as follows:the temperature is about 70℃in the process of batching,the mold is stainless steel sheet with matt finish,the mold temperature is controlled within 65 to 70℃,and the curing molding is operated at 80℃for 2 h,125℃for 1 h,150℃for 4 h.The epoxy resin table surface which meets the laboratory application standards is fabricated by choosing the suitable equipment and process.
作者
张鹏可
王永桥
安小龙
任志垒
屈凤波
Zhang Pengke;Wang Yongqiao;An Xiaolong;Ren Zhilei;Qu Fengbo(Puyang Huicheng Electronic Material Co.,Ltd.,Puyang 457001,China;Institute of Chemistry Co.,Ltd.,Henan Academy of Sciences,Zhengzhou 450002,China)
出处
《合成树脂及塑料》
CAS
北大核心
2018年第1期66-69,75,共5页
China Synthetic Resin and Plastics
基金
河南省科技开放合作项目(17210600063)
关键词
环氧树脂
复合板
实验室工作台面
工业化生产
epoxy resin
composite sheet
laboratory working surface
industrialized production
作者简介
张鹏可,男,1986年生,硕士,工程师,2016年毕业于郑州大学化学工程专业,现主要从事精细化工和环氧树脂复合材料的研究工作。E-mail:rizxpk@163.com。
