期刊文献+

某铅锌矿超细粒尾砂充填强度分析及优化措施 被引量:4

Strength Analysis and Optimization Measures of Super-fine Grained Tailings Filling Technique of a Pb-Zn Mine
在线阅读 下载PDF
导出
摘要 栖霞山铅锌矿充填站-20μm极细颗粒尾砂含量过高,尾砂最大沉降浓度由69%降至61. 98%,充填料浆制备输送浓度由72%降至64%左右,导致充填体强度大幅下降。为此,对充填系统进行优化,使得进入浓密过滤系统的全尾砂不产生溢流细泥而进入充填流程,减少了浓密机溢流细颗粒的含量,提高了充填料浆的级配,将充填料浆浓度提高至74%;并根据充填料浆的流变特性,将充填料浆输送管网管径由89 mm增加至100 mm,保证高浓度充填料浆的输送。充填料浆浓度从70%提高到74%,各龄期的充填体强度均提高20%左右,实现了矿山超细粒全尾砂充填,确保了充填质量。 High levels of -20 μm super-fine grained tailings of the filling station of Qixiashan Pb-Zn Mine lead the maximum sedimentation concentration decreased from 69% to 61.98%, the transport concentration of filling slurry decreased from 72% to about 64%, which caused the filling body strength decreases dramatically. The filling system is optimized, so that the unclassified tailings entering the dense filtration system do not produce the overflow fine mud and enter the filling process, the grading of filling slurry is improved, the concentration of filling slurry is increased to 74%. According to the rheological behavior of filling slurry, the diameter of transport pipe of filling slurry is increased from 89 mm to 100 mm, the safety transport of filling slurry is ensured. During the process of the concentration of filling slurry increased from 70% to 74%, the strength of filling body of each stage can be improved about 20%, the goal of super-fine grained unclassified tailings filling of the mine is realized, the filling quality is guaranteed.
作者 佟磊 徐进军 肖益盖 何伟 Tong Lei 1 Xu Jinjun 2 Xiao Yigai 3,4,5 He Wei 3,4,5(1.Jiangsu Yinmao Pb-Zn Mining Co.,Ltd.;2.Nanshan Mining Company,Masteel (Group) Holding Co.,Ltd.;3.Sinosteel Maanshan Institute of Mining Research Co., Ltd.;4.State Key Laboratory of Safetyand Health for Metal Mines;5.Huawei National Engineering Research Center of High Efficient Cyclicand Utilization of Metallic Mineral Resources Co.,Ltd.)
出处 《现代矿业》 CAS 2018年第10期15-17,20,共4页 Modern Mining
关键词 超细粒尾矿 全尾砂充填 高浓度料浆 管径 充填体强度 Super-fine grained tailings Unclassified tailings filling Slurry with high concentration Pipe diameter Strength of filling body
作者简介 佟磊(1984—),男,工程师,210046 江苏省南京市栖霞区。
  • 相关文献

参考文献7

二级参考文献24

  • 1林卫星.获各琦铜矿充填材料试验研究[J].采矿技术,2013,13(6):40-43. 被引量:3
  • 2陈广文,古德生,高泉.高浓度浆体的浓度判据及其层流输送特性[J].中国有色金属学报,1995,5(4):35-39. 被引量:13
  • 3吕宪俊,连民杰.金属矿山尾矿处理技术进展[J].金属矿山,2005,34(8):1-4. 被引量:71
  • 4周爱民.有色矿山采矿技术新进展[J].采矿技术,2006,6(3):1-7. 被引量:56
  • 5Barnes H A, Nguyen Q D. Rotating vane rheometry: a review. J non Newton Fluid Mech, 2001, 98( 1 ) : 1.
  • 6Boger D. Rheology and minerals industry. Miner Process Extr Met- all Rev, 1999, 20(1): 21.
  • 7于润仓.采矿工程师手册.北京:冶金工业出版社,2009.
  • 8Hallbom D J, Norwood W J. Fuzzy rheology and smooth running paste systems//Proceedings of the Tenth International Seminar on Paste and Thickened Tailings. Perth, 2007 : 199.
  • 9Nehdi M, Rahman M A. Estimating rheological properties of ce- ment pastes using various rheological models for different test ge- ometry, gap and surface friction. Cem Concr Res, 2004, 34 ( 11 ) : 1993.
  • 10Slatter P T. Transition velocity estimation for flow in large pipes// Proceedings of the Tenth International Seminar on Paste and Thick- ened Tailings. Perth, 2007 : 143.

共引文献73

同被引文献82

引证文献4

二级引证文献26

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部