期刊文献+

基于离散元模拟的沥青混合料单轴压缩试验细观力学分析 被引量:8

Micro-mechanical analysis of uniaxial compression test of asphalt mixtures by discrete element modeling
在线阅读 下载PDF
导出
摘要 通过FISH语言编程建立沥青混合料AC-16二维离散元模型,模拟了AC-16单轴压缩试验的全过程,研究了在单轴压缩试验过程中应力-应变、接触力分布、颗粒位移、接触压力和接触拉力的变化情况。研究结果表明:在单轴压缩试验过程中,随着轴向应变的增大,试件中接触压力和接触拉力的分布由密集逐渐变稀疏,并且接触压力和接触拉力集中现象逐渐减少;随着轴向应变的增加,整个试件中、集料和沥青砂浆之间、沥青砂浆之间以及集料之间的接触压力个数比例都逐渐减小,接触拉力个数比例都逐渐增大,并且,整个试件中、集料和沥青砂浆之间、沥青砂浆之间以及集料之间的接触压力均值和接触拉力均值都先增加后减小。 The uniaxial compression test of asphalt mixtures was simulated using a two-dimensional discrete element model. The stress-strain relationship,contact forces and particle displacements were analyzed during different stages of the tests. The results showed that,with the increase of the axial strain,the contact force distribution became sparser,the number of the contact force concentration points decreased,the percentages of the pressure contact force number in the whole sample between asphalt mastic and aggregates in asphalt mastic and in aggregates all decreased while the percentages of the tensile contact force number increased,and the mean of the pressure contact and tensile contact forces in the whole samples between asphalt mastic and aggregates in asphalt mastic and in aggregates increased at the initial stage and then decreased.
出处 《南京工业大学学报(自然科学版)》 CAS 北大核心 2015年第5期73-78,共6页 Journal of Nanjing Tech University(Natural Science Edition)
基金 国家自然科学基金(51108237)
关键词 沥青混合料 单轴压缩试验 离散元 接触力 位移 asphalt mixtures uniaxial compression test discrete element contact force displacement
作者简介 侯曙光(1977-),男,甘肃定西人,副教授,博士,主要研究方向为路基路面工程,E—mail:houshuguang@njtech.edu.cn
  • 相关文献

参考文献11

  • 1Itasca Consulting Group.PFC 2D Version 3.1 [ M ].Minneapolis: hasca Consulting Group,2004.
  • 2Itasca Consulting Group.PFC 3D Version 3.1 [ M ]. Minneapolis: Itasca Consulting Group,2004.
  • 3You Z, Buttlar W G. Discrete element modeling to predict the modulus of asphalt concrete mixtures [ J ]. Journal of Materials in Civil Engineering, 2004,16 ( 2 ) : 140-146.
  • 4You Z, Buttlar W G. Application of discrete element modeling techniques to predict the complex modulus of asphalt-aggregate hollow cylinders subjected to internal pressure[ J] .Transportation Research Record, 2005,1929 : 218 - 226.
  • 5You Z, Buttlar W G. Micromechanical modeling approach to predict compressive dynamic moduli of asphalt mixture using the distinct element method [ J ]. Transportation Research Record, 2006,1970: 73 - 83.
  • 6Kim H, Buttlar W G. Micro mechanical fracture modeling of asphalt mixture using the discrete element method [ C ] //GSP 130 : Advances in Pavement Engineering, Proceeding, Sessions of the Geo-Frontiers 2005 Cangress.Reston : [ s.n. ] ,2005.
  • 7Abbas A, Masad E, Papagiannakis T, et. al. Micro-mechanical modeling of the viscoelastic behavior of asphalt mixtures using the discrete-element method [ J ]. International Journal of Geomechanics, 2007,7 (2) : 131 - 139.
  • 8Dai Q, You Z.Prediction of creep stiffness of asphalt mixture with micromechanical finite-element and discrete-element models [ J ]. Journal of Engineering Mechanics, 2007,133 (2) : 163-173.
  • 9侯曙光.基于动态蠕变试验的沥青混合料黏弹性分析[J].南京工业大学学报(自然科学版),2010,32(1):33-36. 被引量:11
  • 10You Z, Adhikari S, Dai Q. Three-dimensional models for asphalt mixtures [ J ]. Journal Mechanics ,2008,134(12) : 1053-1063.

二级参考文献6

共引文献10

同被引文献58

引证文献8

二级引证文献34

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部