期刊文献+

基于柱坐标系的油井出砂三维数值模型设计与研究 被引量:8

3-dimensional numerical model for sand production in oil wellbore based on cylindrical coordinate system
在线阅读 下载PDF
导出
摘要 根据实际储层砂岩的物性和射孔试验特征,从岩土力学的角度基于柱坐标系建立三维颗粒流(PFC3D)数值模型。综合考虑流体压力梯度力和拖曳力产生的流固耦合效应,运用几何学方法研究油井出砂过程中的砂岩模型变化。数值计算与理论分析比较可知流体运动效应不可忽略,两者的应力分布曲线相吻合,验证了数值模型的可行性和适用性。另外,外界条件一定时,砂岩模型的应力分布、黏结颗粒性态、颗粒位移和流体对单颗粒作用力结果显示不同的单元划分对数值计算结果的影响不大,说明该数值模型的收敛性和稳定性。由此可见,提出的三维数值模型能较好地反映砂岩出砂过程中的宏细观力学特性,为准确理解砂岩出砂的力学机理提供了重要的研究思路和研究手段。 Considering the properties of reservoir sand and the characteristics of perforation tests, a 3-dimensional particle flow code (PFC3D) model is established based on the cylindrical coordinate system from geo-mechanics perspective. Under the cylindrical coordinate system, the fluid-solid coupling theory considering pressure gradient force and drag force and the geometrical theory are adopted to study the change of the geometric model considering sand production in oil wellbore. Comparison between the numerical model and the analytical model indicates that the fluid flow should not be neglected for analysis of sand production, and the stress distribution is in coincidence for the above two methods, which verifies the feasibility and applicability of the proposed numerical model. In addition, under the given conditions, the results including the stress distribution, bonded particles, particle displacement and coupling force on the single particle indicate that different divisions of fluid cells have minor influence on the numerical simulation, which verifies the convergence and stability of this numerical model. Therefore, the proposed model can be used to simulate the macro-micro mechanical characteristics of sand production, and it provides an important technique to better reveal the mechanism of sand production.
作者 刘先珊 许明
出处 《岩土工程学报》 EI CAS CSCD 北大核心 2013年第5期871-878,共8页 Chinese Journal of Geotechnical Engineering
基金 国家自然科学基金项目(51109231) 重庆市自然科学基金项目(cstc2012jjA90005) 武汉大学水资源与水电工程国家重点实验室开放基金项目(2012B100)
关键词 柱坐标系 三维颗粒流数值模型 油井出砂 流固耦合 可行性 稳定性 cylindrical coordinate system 3-dimensional particle flow code model sand production in oil wellbore fluid-solid coupling feasibility , stability
作者简介 作者简介:刘先珊(1978-),女,湖北荆州人,博士,副教授,主要从事岩土体渗流、多场耦合以及数值方法等方面的研究与教学工作。E-mail:liuxianshan@163.com。
  • 相关文献

参考文献15

  • 1曾祥林,何冠军,孙福街,王平双.SZ36-1油藏出砂对渗透率影响及出砂规律实验模拟[J].石油勘探与开发,2005,32(6):105-108. 被引量:36
  • 2房茂军,曾祥林,梁丹,孙福街.稠油出砂规律及出砂模拟实验研究[J].西南石油大学学报(自然科学版),2010,32(6):135-138. 被引量:18
  • 3张伟青,汪强,王启蒙,徐建军,李琴.油藏岩心室内模拟出砂实验研究[J].小型油气藏,2005,10(2):35-38. 被引量:8
  • 4WILLSON S M, MOSCHOVIDIDS Z A, CAMERON J R, et al. New model for predicting the rate of sand production[C]// Proceedings of the SPE/ISRM Rock Mechanics Conference, Irving, Texas. 2002:20 - 23.
  • 5PAPANASTASIOU P, ZERVOS A. Wellbore stability analysis: from linear elasticity to post bifurcation modeling[J]. International Journal of Geomechanics, 2004, 4(1): 2 - 12.
  • 6ISEHUNWA S O, OLANREWAJU O. A simple analyticalmodel for predicting sand production in a Niger Delta oil field[J]. International Journal of Engineering Science and Technology, 2010, 2(9): 4379 - 4387.
  • 7丛洪良,盛宏至.疏松砂岩油藏油井出砂量预测模型及应用[J].石油天然气学报,2006,28(2):120-122. 被引量:18
  • 8DORFMANN A. Micromechanicai modeling of sand production and arching effects around a cavity[J]. International Journal of Rock Mechanics and Mining Sciences, 1997, 34(3/4): 1 - 14.
  • 9LI L, HOLT R. Particle scale reservoir mechanics[J]. Oil and Gas Science and Technology, 2002, 57(5): 525 - 538.
  • 10Itasca Inc. PFC3D 3.10 particle flow code in three dimensions[M]. 3rd ed. Minneapolis: Itasca Inc, 2005.

二级参考文献23

共引文献70

同被引文献111

引证文献8

二级引证文献49

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部