摘要
以某实际燃气轮机涡轮进口导向器叶栅为研究对象,在出口为高亚声速及超声速条件下,对具有不同柯恩达表面的环量控制叶栅进行二维数值模拟,通过对比分析叶栅的气动性能和流场细节,探讨了柯恩达效应在涡轮叶栅中的作用机理.结果表明:当叶栅出口马赫数为0.60时,射流对主流有很好的携带作用,损失小于原型叶栅;叶栅出口马赫数增加到0.85时,射流仍有较强的携带主流折转的能力;当叶栅出口为超声速时,在初始阶段小曲率的柯恩达表面上,由于激波的作用,射流向流道中心折转并提前脱离壁面,初始阶段大曲率的柯恩达表面射流附壁较好,但由于叶片吸力面与射流口之间圆角的作用,射流与主流掺混不理想.
Based on a real turbine inlet guide vane,the two-dimensional flow field of a turbine cascade was simulated by using the circulation control blade profile with different Coanda surfaces.At the cascade exit being high subsonic and supersonic conditions,the aerodynamic performance and the detailed flow fields of different blade profiles were explored.The mechanism of Coanda effect on turbine cascade was discussed.When Mach number at the cascade exit was 0.60,the jet entrained the mainstream well and the loss reduced.When Mach number at the cascade exit increased to 0.85,the ability of the jet carrying the mainstream was still fine.When the cascade exit was at supersonic flow condition,on the Coanda surface with a small curvature in front,the jet turmed to the center of the flow channel and detached the wall in advance on account of the shock wave.On the Coanda surface with a large curvature in front,the jet adhered to the blade quite well.However,it did not mix with the mainstream for good due to the fillet between the jet exit and the suction surface.
出处
《航空动力学报》
EI
CAS
CSCD
北大核心
2013年第3期659-665,共7页
Journal of Aerospace Power
基金
国家自然科学基金(50876023)
高等学校博士学科点专项基金(200802130017)
关键词
涡轮叶栅
柯恩达效应
数值模拟
柯恩达表面曲率
马赫数
射流参数
turbine cascade
Coanda effect
numerical simulation
curvature of Coanda surface
Mach number
jet parameters
作者简介
冯岩岩（1989-），女，河南鹤壁人，硕士生，主要从事叶轮机械气动热力学研究．
