摘要
采用电泳沉积法在Pt/Ti/SiO_2/Si基底上制备了厚度为33μm的Ba_(0.6)Sr_(0.4)TiO_3(BST40)厚膜,研究了其介电调谐特性、漏电流特性和铁电特性.实验结果表明:采用水热法制备纳米BST40粒子,经250MPa高压压制,950℃热处理后,BST40厚膜可形成完整的立方钙钛矿结构且表面致密、无裂纹.ε-V特性表明,1kHz时厚膜调谐率可达59.2%.I-V特性表明,当电压从-25～25V变化时,漏导电流<100μA/cm^2.测量了在1kHz,不同温度下厚膜的电滞回线.在0℃时,其剩余极化强度为1.06μC/cm^2.
Ba0.6Sr0.4TiO3 （BST40） thick film with thickness of 33μm was prepared by electrophoretic deposition method on Pt/Ti/SiO2/Si substrate using the BST40 nano powders as precursor. A high pressure treatment process was introduced in order to increase the density and decrease the sintering temperature of the film. The composition and surface morphology of the BST40 thick film were characterized. The ε-V curve of the BST40 thick film was measured. The leakage current density was tested and hysteresis loops of the thick film were measured at different temperatures. The results show that a dense and no crack surface are formed after sintering at 950℃. A tunability of 59.2% is calculated according to the ε-V curve. The leakage current is less than 100μA/cm^2 when the applied voltage shifts from 25V to 25V. The remnant polarization is 1.06μC/cm^2 at the temperature of 0℃ and the frequency of 1kHz.
出处
《无机材料学报》
SCIE
EI
CAS
CSCD
北大核心
2008年第4期687-690,共4页
Journal of Inorganic Materials
基金
国家自然科学基金(50672075)
航空科学基金(2006ZF53068)
西北工业大学研究生创业种子基金
作者简介
通讯联系人：樊慧庆，教授．E—mail：hqfan3@163．com
