期刊文献+

印染废水深度处理工程及工艺改进 被引量:7

Advanced Treatment Engineering of Printing and Dyeing Wastewater and Process Improvement
在线阅读 下载PDF
导出
摘要 采用曝气生物滤池(BAF)/臭氧预氧化/BAF组合工艺对印染废水二级生化处理出水进行深度处理,COD从进水的90~160 mg/L左右稳定降至30 mg/L以下,色度从进水的64~128倍左右降至2~4倍,出水浊度<1 NTU,排放水质达到回用要求,处理成本为1.43元/m3。之后又对工艺进行改进,设计出一体化装置,COD去除率>70%,其他指标均达到排放标准,处理成本仅为0.89元/m3。 The combined process of biological aerated filter(BAF),ozonation and BAF was used for advanced treatment of printing and dyeing wastewater after secondary biochemical treatment.COD is reduced from 90-160 mg/L in the influent to below 30 mg/L,color is decreased from 64-128 times in the influent to 2-4 times,and the turbidity is less than 1 NTU.The effluent can meet the reused water quality for the production process.The treatment cost is about 1.43 yuan/m3.After the improvement of the combined process,the in...
作者 丛丛 汪晓军
出处 《中国给水排水》 CAS CSCD 北大核心 2009年第24期58-61,共4页 China Water & Wastewater
关键词 印染废水 深度处理 臭氧 曝气生物滤池 一体化工艺 printing and dyeing wastewater advanced treatment ozone biological aerated filter integrated process
  • 相关文献

参考文献5

二级参考文献38

共引文献96

同被引文献48

引证文献7

二级引证文献98

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部