Two postpartum cows were used to study the ultrastructural changes of uterine endometrium by using scanning electron microscope.The results showed that the process of repair of uterine endometrium after calving was de...Two postpartum cows were used to study the ultrastructural changes of uterine endometrium by using scanning electron microscope.The results showed that the process of repair of uterine endometrium after calving was demonstrated by scanning electron microscope through a series of endometrium biopsy.Some part of the endometrium was damaged after calving and its adjacent endometrium cells became necrosis and exfoliated during the first 7 days post-partum;the cilium and microvillus of the epithelial cell in the undamaged area of the endometrium disappeared.By 26 days postpartum the damaged area reduced and the cilium and microvillus increased in their numbers.The damaged tissues were all repaired by day 60 postpartum.展开更多
In this study, 40 Cr Mn Si B steel cylindrical shells were tempered at 350, 500 and 600 ℃ to study the effect of tempering temperature on the dynamic process of expansion and fracture of the metal shell. A midexplosi...In this study, 40 Cr Mn Si B steel cylindrical shells were tempered at 350, 500 and 600 ℃ to study the effect of tempering temperature on the dynamic process of expansion and fracture of the metal shell. A midexplosion recovery experiment for the metal cylinder under internal explosive loading was designed, and the wreckage of the casings at the intermediate phase was obtained. The effects of different tempering temperatures on the macroscopic and microscopic fracture characteristics of 40 Cr Mn Si B steel were studied. The influence of tempering temperatures on the fracture characteristic parameters of the recovered wreckage were measured and analyzed, including the circumferential divide size, the thickness and the number of the circumferential divisions. The results show that as the tempering temperature was increased from 350 to 600 ℃, at first, the degree of fragmentation and the fracture characteristic parameters of the recovered wreckage changed significantly and then became essentially consistent. Scanning electron microscopy analysis revealed flow-like structure characteristics caused by adiabatic shear on different fracture surfaces. At the detonation initiation end of the casing, fracturing was formed by tearing along the crack, which existed a distance from the initiation end and propagated along the axis direction. In contrast, the fracturing near the middle position consists of a plurality of radial shear fracture units. The amount of alloy carbide that was precipitated during the tempering process increased continuously with tempering temperature, leading to an increasing number of spherical carbide particles scattered around the fracture surface.展开更多
It is well known that β-BBO is a new type nonlinear optical crystal discovered in our institute and now β-BBO is widely used in the fields of laser and nonlinear optics. However, there are still some inclusions in ...It is well known that β-BBO is a new type nonlinear optical crystal discovered in our institute and now β-BBO is widely used in the fields of laser and nonlinear optics. However, there are still some inclusions in β-BBO crystal grown by flux method. Using AEM technique, we have studied the shape, composition and structure of inclusions which is very helpful to the explanation of the formation of inclusions.展开更多
The novelty of this research lies in the successful fabrication of a 3D-printed honeycomb structure filled with nanofillers for acoustic properties,utilizing an impedance tube setup in accordance with ASTM standard E ...The novelty of this research lies in the successful fabrication of a 3D-printed honeycomb structure filled with nanofillers for acoustic properties,utilizing an impedance tube setup in accordance with ASTM standard E 1050-12.The Creality Ender-3,a 3D printer,was used for printing the honeycomb structures,and polylactic acid(PLA)material was employed for their construction.The organic,inorganic,and polymeric compounds within the composites were identified using fourier transformation infrared(FTIR)spectroscopy.The structure and homogeneity of the samples were examined using a field emission scanning electron microscope(FESEM).To determine the sound absorption coefficient of the 3D printed honeycomb structure,numerous samples were systematically developed using central composite design(CCD)and analysed using response surface methodology(RSM).The RSM mathematical model was established to predict the optimum values of each factor and noise reduction coefficient(NRC).The optimum values for an NRC of 0.377 were found to be 1.116 wt% carbon black,1.025 wt% aluminium powder,and 3.151 mm distance between parallel edges.Overall,the results demonstrate that a 3Dprinted honeycomb structure filled with nanofillers is an excellent material that can be utilized in various fields,including defence and aviation,where lightweight and acoustic properties are of great importance.展开更多
页岩扫描电镜(scanning electron microscope,SEM)图像智能识别能够快速分析页岩储层矿物,是页岩油储层“甜点”预测的重要手段之一,也是未来的技术发展趋势。传统方法在鉴定矿物成分时存在自动化程度低、样本适配度低和特征提取受限等...页岩扫描电镜(scanning electron microscope,SEM)图像智能识别能够快速分析页岩储层矿物,是页岩油储层“甜点”预测的重要手段之一,也是未来的技术发展趋势。传统方法在鉴定矿物成分时存在自动化程度低、样本适配度低和特征提取受限等问题。为此,本文提出基于BlendMask的页岩SEM图像鉴定方法。首先,采用双边滤波、拉普拉斯和图像归一化等图像预处理技术对原始图像进行去噪、锐化和像素统一处理,提高训练样本的质量;然后,采用旋转、缩放、光度变化等图像增广方法构建增广策略,扩大数据集数量;最后,利用注意力机制和深度可分离卷积改进BlendMask网络,实现图像的成分分割与识别。应用于海塔盆地的页岩SEM图像实验结果表明,相比BlendMask模型,改进后方法的分割准确率和召回率分别提升了0.02~0.20和0~0.59,分割用时减少了1.29~2.70 s。展开更多
目的以课题组纯化获得的蛋白样本为观察对象,对比原子力显微镜(atomic force microscope,AFM)及扫描电子显微镜(scanning electron microscope,SEM)的观察结果,并总结AFM观察生物大分子的主要问题和解决方法。方法将蛋白样本使用PBS稀释...目的以课题组纯化获得的蛋白样本为观察对象,对比原子力显微镜(atomic force microscope,AFM)及扫描电子显微镜(scanning electron microscope,SEM)的观察结果,并总结AFM观察生物大分子的主要问题和解决方法。方法将蛋白样本使用PBS稀释至15 nmol·L^(-1),分别固定于载玻片、硅片和云母片上烘干,制成固相观察样本,SEM样本在观察前镀铂,使用AFM及SEM观察蛋白质表面结构,计算样本高度,对比结果差异。结果带正电的蛋白样本在观察时由于AFM探针的斥力会向右偏移;云母片能很好地消除蛋白正电荷从而避免样本移动;PBS能为蛋白样本提供良好的稳定环境,但PBS盐结晶会干扰探针运行和成像清晰度;SEM样本需要镀铂后观察,无法达到AFM的精度。结论使用AFM和SEM均可在体外环境直接观察蛋白质结构,AFM能提供更高精度的观察结果;在蛋白样本稳定性允许的情况下首选超纯水为溶剂载体,乙醇等挥发性液体也可作为溶剂载体,AFM的应用可为药理学生物大分子互作研究提供一新途径。展开更多
基金The projectis supported financially by Heilongjiang( C- 970 2 ) and Chinese national( 39870 572 ) natural and scientificfunds.
文摘Two postpartum cows were used to study the ultrastructural changes of uterine endometrium by using scanning electron microscope.The results showed that the process of repair of uterine endometrium after calving was demonstrated by scanning electron microscope through a series of endometrium biopsy.Some part of the endometrium was damaged after calving and its adjacent endometrium cells became necrosis and exfoliated during the first 7 days post-partum;the cilium and microvillus of the epithelial cell in the undamaged area of the endometrium disappeared.By 26 days postpartum the damaged area reduced and the cilium and microvillus increased in their numbers.The damaged tissues were all repaired by day 60 postpartum.
基金funded by the National Natural Science Foundation of China (Grant No.11972018)sponsored by the Defense Pre-Research Joint Foundation of Chinese Ordnance Industry (Grant No. 6141B012858)。
文摘In this study, 40 Cr Mn Si B steel cylindrical shells were tempered at 350, 500 and 600 ℃ to study the effect of tempering temperature on the dynamic process of expansion and fracture of the metal shell. A midexplosion recovery experiment for the metal cylinder under internal explosive loading was designed, and the wreckage of the casings at the intermediate phase was obtained. The effects of different tempering temperatures on the macroscopic and microscopic fracture characteristics of 40 Cr Mn Si B steel were studied. The influence of tempering temperatures on the fracture characteristic parameters of the recovered wreckage were measured and analyzed, including the circumferential divide size, the thickness and the number of the circumferential divisions. The results show that as the tempering temperature was increased from 350 to 600 ℃, at first, the degree of fragmentation and the fracture characteristic parameters of the recovered wreckage changed significantly and then became essentially consistent. Scanning electron microscopy analysis revealed flow-like structure characteristics caused by adiabatic shear on different fracture surfaces. At the detonation initiation end of the casing, fracturing was formed by tearing along the crack, which existed a distance from the initiation end and propagated along the axis direction. In contrast, the fracturing near the middle position consists of a plurality of radial shear fracture units. The amount of alloy carbide that was precipitated during the tempering process increased continuously with tempering temperature, leading to an increasing number of spherical carbide particles scattered around the fracture surface.
文摘It is well known that β-BBO is a new type nonlinear optical crystal discovered in our institute and now β-BBO is widely used in the fields of laser and nonlinear optics. However, there are still some inclusions in β-BBO crystal grown by flux method. Using AEM technique, we have studied the shape, composition and structure of inclusions which is very helpful to the explanation of the formation of inclusions.
文摘The novelty of this research lies in the successful fabrication of a 3D-printed honeycomb structure filled with nanofillers for acoustic properties,utilizing an impedance tube setup in accordance with ASTM standard E 1050-12.The Creality Ender-3,a 3D printer,was used for printing the honeycomb structures,and polylactic acid(PLA)material was employed for their construction.The organic,inorganic,and polymeric compounds within the composites were identified using fourier transformation infrared(FTIR)spectroscopy.The structure and homogeneity of the samples were examined using a field emission scanning electron microscope(FESEM).To determine the sound absorption coefficient of the 3D printed honeycomb structure,numerous samples were systematically developed using central composite design(CCD)and analysed using response surface methodology(RSM).The RSM mathematical model was established to predict the optimum values of each factor and noise reduction coefficient(NRC).The optimum values for an NRC of 0.377 were found to be 1.116 wt% carbon black,1.025 wt% aluminium powder,and 3.151 mm distance between parallel edges.Overall,the results demonstrate that a 3Dprinted honeycomb structure filled with nanofillers is an excellent material that can be utilized in various fields,including defence and aviation,where lightweight and acoustic properties are of great importance.
文摘页岩扫描电镜(scanning electron microscope,SEM)图像智能识别能够快速分析页岩储层矿物,是页岩油储层“甜点”预测的重要手段之一,也是未来的技术发展趋势。传统方法在鉴定矿物成分时存在自动化程度低、样本适配度低和特征提取受限等问题。为此,本文提出基于BlendMask的页岩SEM图像鉴定方法。首先,采用双边滤波、拉普拉斯和图像归一化等图像预处理技术对原始图像进行去噪、锐化和像素统一处理,提高训练样本的质量;然后,采用旋转、缩放、光度变化等图像增广方法构建增广策略,扩大数据集数量;最后,利用注意力机制和深度可分离卷积改进BlendMask网络,实现图像的成分分割与识别。应用于海塔盆地的页岩SEM图像实验结果表明,相比BlendMask模型,改进后方法的分割准确率和召回率分别提升了0.02~0.20和0~0.59,分割用时减少了1.29~2.70 s。
文摘目的以课题组纯化获得的蛋白样本为观察对象,对比原子力显微镜(atomic force microscope,AFM)及扫描电子显微镜(scanning electron microscope,SEM)的观察结果,并总结AFM观察生物大分子的主要问题和解决方法。方法将蛋白样本使用PBS稀释至15 nmol·L^(-1),分别固定于载玻片、硅片和云母片上烘干,制成固相观察样本,SEM样本在观察前镀铂,使用AFM及SEM观察蛋白质表面结构,计算样本高度,对比结果差异。结果带正电的蛋白样本在观察时由于AFM探针的斥力会向右偏移;云母片能很好地消除蛋白正电荷从而避免样本移动;PBS能为蛋白样本提供良好的稳定环境,但PBS盐结晶会干扰探针运行和成像清晰度;SEM样本需要镀铂后观察,无法达到AFM的精度。结论使用AFM和SEM均可在体外环境直接观察蛋白质结构,AFM能提供更高精度的观察结果;在蛋白样本稳定性允许的情况下首选超纯水为溶剂载体,乙醇等挥发性液体也可作为溶剂载体,AFM的应用可为药理学生物大分子互作研究提供一新途径。
