TiC/Ti_(2)AlC core-shell structure reinforced Ti-based composite coating was prepared by laser cladding technology.The effect of Ti_(2)AlC content on the microstructure and mechanical behavior of the coating was studi...TiC/Ti_(2)AlC core-shell structure reinforced Ti-based composite coating was prepared by laser cladding technology.The effect of Ti_(2)AlC content on the microstructure and mechanical behavior of the coating was studied.The results showed that the reinforced phase was mainly TiC/Ti_(2)AlC MAX phase core-shell structure at 20%Ti_(2)AlC content.According to the synthesis mechanism,Ti_(2)AlC nucleated on TiC through the diffusion of Al atoms to further generate the core-shell structure.The friction and wear test results showed that the wear resistance of the coating was significantly improved under the load distribution effect of the core-shell structure.The friction coefficient decreased to 0.342,and the wear rate reached 8.19×10^(−5)mm^(3)/(N·m),which was only 47.07%of TC4 substrate.展开更多
Ce O2@Si O2 core-shell nanoparticles were prepared by microemulsion method, and metalloporphyrins were immobilized on the Ce O2@Si O2 core-shell nanoparticles surface via amide bond. The supported metalloporphyrin cat...Ce O2@Si O2 core-shell nanoparticles were prepared by microemulsion method, and metalloporphyrins were immobilized on the Ce O2@Si O2 core-shell nanoparticles surface via amide bond. The supported metalloporphyrin catalysts were characterized by N2 adsorption-desorption isotherm(BET), scanning electron microscopy(SEM), transmission electron microscopy(TEM), X-ray diffraction(XRD), ultraviolet and visible spectroscopy(UV-Vis), and Fourier transform infrared spectroscopy(FT-IR). The results show that the morphology of Ce O2@Si O2 nanoparticles is core-shell microspheres with about 30 nm in diameter, and metalloporphyrins are immobilized on the Ce O2@Si O2 core-shell nanoparticles via amide bond. Especially, the core-shell structure contains multi Ce O2 core and thin Si O2 shell, which may benefit the synergistic effect between the Ce O2 core and the porphyrin anchored on the very thin Si O2 shell. As a result, this supported metalloporphyrin catalysts present comparably high catalytic activity and stability for oxidation of ethylbenzene with molecular oxygen, namely, ethylbenzene conversion remains around 12% with identical selectivity of about 80% for acetophenone even after six-times reuse of the catalyst.展开更多
Cubic boron nitride(CBN) micro powders and mixture of CBN micro powders with Al or Ti powders were fast heated at 1 300,1 400,1 450,1 500℃,and then kept for 5 min under spark plasma sintering (SPS).The obtained powde...Cubic boron nitride(CBN) micro powders and mixture of CBN micro powders with Al or Ti powders were fast heated at 1 300,1 400,1 450,1 500℃,and then kept for 5 min under spark plasma sintering (SPS).The obtained powders were analyzed with XRD.The results show that,simple CBN kept cubic structure after heated at 1 300℃;when the temperature rose to 1 400℃,some CBN was transformed into hexagonal structured boron nitride(hBN).As for CBN micro powders mixed with aluminum or titanium micro powders,the onset transforming temperature of CBN to hBN get raised.This results indicated that the structural transformation of boron nitride begun from the surface of CBN crystal particle,different coexist elements affect the surface situation of CBN particles.As the stabilities of CBN crystal particle surface improved,the onset structural transform temperature of CBN was also increased.展开更多
The weak interface interaction and solid-solid phase transition have long been a conundrum for 1,3,5,7-tetranitro-1,3,5,7-tetraazacyclooctane(HMX)-based polymer-bonded explosives(PBX).A two-step strategy that involves...The weak interface interaction and solid-solid phase transition have long been a conundrum for 1,3,5,7-tetranitro-1,3,5,7-tetraazacyclooctane(HMX)-based polymer-bonded explosives(PBX).A two-step strategy that involves the pretreatment of HMX to endow—OH groups on the surface via polyalcohol bonding agent modification and in situ coating with nitrate ester-containing polymer,was proposed to address the problem.Two types of energetic polyether—glycidyl azide polymer(GAP)and nitrate modified GAP(GNP)were grafted onto HMX crystal based on isocyanate addition reaction bridged through neutral polymeric bonding agent(NPBA)layer.The morphology and structure of the HMX-based composites were characterized in detail and the core-shell structure was validated.The grafted polymers obviously enhanced the adhesion force between HMX crystals and fluoropolymer(F2314)binder.Due to the interfacial reinforcement among the components,the two HMX-based composites exhibited a remarkable increment of phase transition peak temperature by 10.2°C and 19.6°C with no more than 1.5%shell content,respectively.Furthermore,the impact and friction sensitivity of the composites decreased significantly as a result of the barrier produced by the grafted polymers.These findings will enhance the future prospects for the interface design of energetic composites aiming to solve the weak interface and safety concerns.展开更多
The core-shell 2,4,6,8,10,12-Hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane/2,4,6-Trinitrotoluene(CL-20/TNT)composite was prepared by spray-drying method in which sensitive high energy explosive(CL-20)was coated with in...The core-shell 2,4,6,8,10,12-Hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane/2,4,6-Trinitrotoluene(CL-20/TNT)composite was prepared by spray-drying method in which sensitive high energy explosive(CL-20)was coated with insensitive explosive(TNT).The structure and properties of different formulations of CL-20/TNT composite and CL-20/TNT mixture were characterized by scanning electron microscopy(SEM),Transmission electron microscopy(TEM),Laser particle size analyzer,X-ray photoelectron spectroscopy(XPS),X-ray diffraction(XRD),differential scanning calorimetry(DSC),impact sensitivity test and detonation performance.The results of SEM,TEM,XPS and XRD show that e-CL-20 particles are coated by TNT.When the ratio of CL-20/TNT is 75/25,core-shell structure is well formed,and thickness of the shell is about 20e30 nm.And the analysis of heat and impact show that with the increase of TNT content,the TNT coating on the core-shell composite material can not only catalyze the thermal decomposition of core material(CL-20),but also greatly reduce the impact sensitivity.Compared with the CL-20/TNT mixture(75/25)at the same ratio,the characteristic drop height of core-shell CL-20/TNT composite(75/25)increased by 47.6%and the TNT coating can accelerate the nuclear decomposition in the CL-20/TNT composites.Therefore,the preparation of the core-shell composites can be regarded as a unique means,by which the composites are characterized by controllable decomposition rate,high energy and excellent mechanical sensitivity and could be applied to propellants and other fields.展开更多
A facile and economical approach was developed for the large-scale production of powdered core-shell structured PTFE/Al (CS-PA) energetic materials through ultrasonic-assisted mixing. The low-cost micrometer-sized PTF...A facile and economical approach was developed for the large-scale production of powdered core-shell structured PTFE/Al (CS-PA) energetic materials through ultrasonic-assisted mixing. The low-cost micrometer-sized PTFE and Al particles were used as starting materials. Under high-power ultrasonic waves, the PTFE powder was dispersed into nano-to sub-micrometer-sized particles and then encapsulated the Al microparticles to form the core-shell structure. The heat of combustion, burning rate, and pressurization rate of the powdered CS-PA were measured. The thermal-initiated reaction behavior was further evaluated using thermogravimetry-differential scanning calorimetry. Subsequently, the bulk CS-PA with a uniform microstructure was obtained via cold isostatic pressing of the powdered CS-PA followed by vacuum sintering. For the bulk CS-PA, the quasi-static compression behavior was characterized, and the impact-initiated reaction processes were conducted using the Split Hopkinson Pressure Bar (SHPB) and evaluated by a high-speed camera. Compared to physically mixed PTFE/Al materials, the powdered and bulk CS-PA demonstrated enhanced thermal- and impact-initiated reaction characteristics respectively, proving the effectiveness of our approach for constructing core-shell structures.展开更多
The crystal structure,formation kinetics and micro-morphology of CaO·SiO2 during high-temperature sintering process were studied in low-calcium system by XRD,FT-IR,Raman and SEM-EDS methods.When the molar ratio o...The crystal structure,formation kinetics and micro-morphology of CaO·SiO2 during high-temperature sintering process were studied in low-calcium system by XRD,FT-IR,Raman and SEM-EDS methods.When the molar ratio of CaCO3 to SiO2 is 1.0,β-2CaO·SiO2 forms firstly during the heating process,and then CaO·SiO2 is generated by the transformation reaction of pre-formed 2CaO·SiO2 with SiO2.3CaO·SiO2 and 3CaO·2SiO2 do not form either in the heating or sintering process.Rising the sintering temperature and prolonging the holding time promote the phase transition of 2CaO·SiO2 to CaO·SiO2,resulting in the sintered products a small blue shift and broadening in Raman spectra.The content of CS can reach 97.4%when sintered at 1400℃ for 1 h.The formation kinetics of CaO·SiO2 follows the second-order chemical reaction model,and the corresponding apparent activation energy and pre-exponential factor are 505.82 kJ/mol and 2.16×10^14 s^−1 respectively.展开更多
The phase transition,morphology,stability and pulverization performance of dicalcium silicate(C_(2)S)with different Na_(2)O additions during the high-temperature sintering process were studied using XRD,SEM-EDS,FT-IR,...The phase transition,morphology,stability and pulverization performance of dicalcium silicate(C_(2)S)with different Na_(2)O additions during the high-temperature sintering process were studied using XRD,SEM-EDS,FT-IR,and Raman spectra methods.When the CaO to SiO_(2) molar ratio is 2.0 and the Na_(2)O to SiO_(2) molar ratio is below 0.20,the crystalline calcium silicate compounds includeγ-C_(2)S andβ-C_(2)S.As the Na_(2)O addition increases,the proportion,crystallinity and grain size ofβ-C_(2)S in the sintered products increase,those parameters ofγ-C_(2)S decrease,and the content of amorphous phase increases.Na_(2)O mainly forms solid solutions inβ-C_(2)S and inhibits the transition ofβ-C_(2)S toγ-C_(2)S,resulting in the sintered products unpulverized.The stability of sintered products in alkali solution decreases significantly with the increasing Na_(2)O additions,and theβ-C_(2)S solid solution with Na_(2)O is less stable thanγ-C_(2)S.The mechanism that Na_(2)O affects the transition of C_(2)S as well as its stability was also discussed,which can give actual guidance for the treatment of low-grade alumina-containing resources by the sintering process.展开更多
基金Project(52365020) supported by the National Natural Science Foundation of ChinaProject([2022]06) supported by the Special Fund for Special Posts of Guizhou University,China+2 种基金Project([2024]03) supported by the Guizhou University Fund,ChinaProject(ZK[2023]78) supported by the Guizhou Provincial Basic Research Program(Natural Science),ChinaProject(BQW[2024]011) supported by the Guizhou Province Science and Technology Foundation,China。
文摘TiC/Ti_(2)AlC core-shell structure reinforced Ti-based composite coating was prepared by laser cladding technology.The effect of Ti_(2)AlC content on the microstructure and mechanical behavior of the coating was studied.The results showed that the reinforced phase was mainly TiC/Ti_(2)AlC MAX phase core-shell structure at 20%Ti_(2)AlC content.According to the synthesis mechanism,Ti_(2)AlC nucleated on TiC through the diffusion of Al atoms to further generate the core-shell structure.The friction and wear test results showed that the wear resistance of the coating was significantly improved under the load distribution effect of the core-shell structure.The friction coefficient decreased to 0.342,and the wear rate reached 8.19×10^(−5)mm^(3)/(N·m),which was only 47.07%of TC4 substrate.
基金Projects(J21103045,J1210040,J1103312) supported by the National Natural Science Foundation of ChinaProject supported by the Fundamental Research Funds for the Central Universities of China
文摘Ce O2@Si O2 core-shell nanoparticles were prepared by microemulsion method, and metalloporphyrins were immobilized on the Ce O2@Si O2 core-shell nanoparticles surface via amide bond. The supported metalloporphyrin catalysts were characterized by N2 adsorption-desorption isotherm(BET), scanning electron microscopy(SEM), transmission electron microscopy(TEM), X-ray diffraction(XRD), ultraviolet and visible spectroscopy(UV-Vis), and Fourier transform infrared spectroscopy(FT-IR). The results show that the morphology of Ce O2@Si O2 nanoparticles is core-shell microspheres with about 30 nm in diameter, and metalloporphyrins are immobilized on the Ce O2@Si O2 core-shell nanoparticles via amide bond. Especially, the core-shell structure contains multi Ce O2 core and thin Si O2 shell, which may benefit the synergistic effect between the Ce O2 core and the porphyrin anchored on the very thin Si O2 shell. As a result, this supported metalloporphyrin catalysts present comparably high catalytic activity and stability for oxidation of ethylbenzene with molecular oxygen, namely, ethylbenzene conversion remains around 12% with identical selectivity of about 80% for acetophenone even after six-times reuse of the catalyst.
基金support provided by Natural Science Foundation of Hebei Province(No.E 2006000226)
文摘Cubic boron nitride(CBN) micro powders and mixture of CBN micro powders with Al or Ti powders were fast heated at 1 300,1 400,1 450,1 500℃,and then kept for 5 min under spark plasma sintering (SPS).The obtained powders were analyzed with XRD.The results show that,simple CBN kept cubic structure after heated at 1 300℃;when the temperature rose to 1 400℃,some CBN was transformed into hexagonal structured boron nitride(hBN).As for CBN micro powders mixed with aluminum or titanium micro powders,the onset transforming temperature of CBN to hBN get raised.This results indicated that the structural transformation of boron nitride begun from the surface of CBN crystal particle,different coexist elements affect the surface situation of CBN particles.As the stabilities of CBN crystal particle surface improved,the onset structural transform temperature of CBN was also increased.
基金the support for this work by National Natural Science Foundation of China(Grant Nos.22175139 and 22105156)。
文摘The weak interface interaction and solid-solid phase transition have long been a conundrum for 1,3,5,7-tetranitro-1,3,5,7-tetraazacyclooctane(HMX)-based polymer-bonded explosives(PBX).A two-step strategy that involves the pretreatment of HMX to endow—OH groups on the surface via polyalcohol bonding agent modification and in situ coating with nitrate ester-containing polymer,was proposed to address the problem.Two types of energetic polyether—glycidyl azide polymer(GAP)and nitrate modified GAP(GNP)were grafted onto HMX crystal based on isocyanate addition reaction bridged through neutral polymeric bonding agent(NPBA)layer.The morphology and structure of the HMX-based composites were characterized in detail and the core-shell structure was validated.The grafted polymers obviously enhanced the adhesion force between HMX crystals and fluoropolymer(F2314)binder.Due to the interfacial reinforcement among the components,the two HMX-based composites exhibited a remarkable increment of phase transition peak temperature by 10.2°C and 19.6°C with no more than 1.5%shell content,respectively.Furthermore,the impact and friction sensitivity of the composites decreased significantly as a result of the barrier produced by the grafted polymers.These findings will enhance the future prospects for the interface design of energetic composites aiming to solve the weak interface and safety concerns.
文摘The core-shell 2,4,6,8,10,12-Hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane/2,4,6-Trinitrotoluene(CL-20/TNT)composite was prepared by spray-drying method in which sensitive high energy explosive(CL-20)was coated with insensitive explosive(TNT).The structure and properties of different formulations of CL-20/TNT composite and CL-20/TNT mixture were characterized by scanning electron microscopy(SEM),Transmission electron microscopy(TEM),Laser particle size analyzer,X-ray photoelectron spectroscopy(XPS),X-ray diffraction(XRD),differential scanning calorimetry(DSC),impact sensitivity test and detonation performance.The results of SEM,TEM,XPS and XRD show that e-CL-20 particles are coated by TNT.When the ratio of CL-20/TNT is 75/25,core-shell structure is well formed,and thickness of the shell is about 20e30 nm.And the analysis of heat and impact show that with the increase of TNT content,the TNT coating on the core-shell composite material can not only catalyze the thermal decomposition of core material(CL-20),but also greatly reduce the impact sensitivity.Compared with the CL-20/TNT mixture(75/25)at the same ratio,the characteristic drop height of core-shell CL-20/TNT composite(75/25)increased by 47.6%and the TNT coating can accelerate the nuclear decomposition in the CL-20/TNT composites.Therefore,the preparation of the core-shell composites can be regarded as a unique means,by which the composites are characterized by controllable decomposition rate,high energy and excellent mechanical sensitivity and could be applied to propellants and other fields.
基金This work was supported by the National Natural Science Foundation of China(No.51571033,11804022)the Science and Technology on Transient Impact Laboratory Foundation(No.6142606183208).
文摘A facile and economical approach was developed for the large-scale production of powdered core-shell structured PTFE/Al (CS-PA) energetic materials through ultrasonic-assisted mixing. The low-cost micrometer-sized PTFE and Al particles were used as starting materials. Under high-power ultrasonic waves, the PTFE powder was dispersed into nano-to sub-micrometer-sized particles and then encapsulated the Al microparticles to form the core-shell structure. The heat of combustion, burning rate, and pressurization rate of the powdered CS-PA were measured. The thermal-initiated reaction behavior was further evaluated using thermogravimetry-differential scanning calorimetry. Subsequently, the bulk CS-PA with a uniform microstructure was obtained via cold isostatic pressing of the powdered CS-PA followed by vacuum sintering. For the bulk CS-PA, the quasi-static compression behavior was characterized, and the impact-initiated reaction processes were conducted using the Split Hopkinson Pressure Bar (SHPB) and evaluated by a high-speed camera. Compared to physically mixed PTFE/Al materials, the powdered and bulk CS-PA demonstrated enhanced thermal- and impact-initiated reaction characteristics respectively, proving the effectiveness of our approach for constructing core-shell structures.
基金Projects(51674075,51774079)supported by the National Natural Science Foundation of ChinaProject(2018YFC1901903)supported by the National Key R&D Program of ChinaProject(N182508026)supported by the Fundamental Research Funds for the Central Universities of China。
文摘The crystal structure,formation kinetics and micro-morphology of CaO·SiO2 during high-temperature sintering process were studied in low-calcium system by XRD,FT-IR,Raman and SEM-EDS methods.When the molar ratio of CaCO3 to SiO2 is 1.0,β-2CaO·SiO2 forms firstly during the heating process,and then CaO·SiO2 is generated by the transformation reaction of pre-formed 2CaO·SiO2 with SiO2.3CaO·SiO2 and 3CaO·2SiO2 do not form either in the heating or sintering process.Rising the sintering temperature and prolonging the holding time promote the phase transition of 2CaO·SiO2 to CaO·SiO2,resulting in the sintered products a small blue shift and broadening in Raman spectra.The content of CS can reach 97.4%when sintered at 1400℃ for 1 h.The formation kinetics of CaO·SiO2 follows the second-order chemical reaction model,and the corresponding apparent activation energy and pre-exponential factor are 505.82 kJ/mol and 2.16×10^14 s^−1 respectively.
基金Project(2018YFC1901903)supported by the National Key R&D Program of ChinaProjects(22078055,52074083,51674075)supported by the National Natural Science Foundation of China。
文摘The phase transition,morphology,stability and pulverization performance of dicalcium silicate(C_(2)S)with different Na_(2)O additions during the high-temperature sintering process were studied using XRD,SEM-EDS,FT-IR,and Raman spectra methods.When the CaO to SiO_(2) molar ratio is 2.0 and the Na_(2)O to SiO_(2) molar ratio is below 0.20,the crystalline calcium silicate compounds includeγ-C_(2)S andβ-C_(2)S.As the Na_(2)O addition increases,the proportion,crystallinity and grain size ofβ-C_(2)S in the sintered products increase,those parameters ofγ-C_(2)S decrease,and the content of amorphous phase increases.Na_(2)O mainly forms solid solutions inβ-C_(2)S and inhibits the transition ofβ-C_(2)S toγ-C_(2)S,resulting in the sintered products unpulverized.The stability of sintered products in alkali solution decreases significantly with the increasing Na_(2)O additions,and theβ-C_(2)S solid solution with Na_(2)O is less stable thanγ-C_(2)S.The mechanism that Na_(2)O affects the transition of C_(2)S as well as its stability was also discussed,which can give actual guidance for the treatment of low-grade alumina-containing resources by the sintering process.
