A 32 kbit OTP(one-time programmable)memory for MCUs(micro-controller units)used in remote controllers was designed.This OTP memory is used for program and data storage.It is required to apply 5.5V to BL(bit-line)and 1...A 32 kbit OTP(one-time programmable)memory for MCUs(micro-controller units)used in remote controllers was designed.This OTP memory is used for program and data storage.It is required to apply 5.5V to BL(bit-line)and 11V to WL(word-line)for a OTP cell of 0.35μm ETOX(EEPROM tunnel oxide)type by MagnaChip.We use 5V transistors on column data paths to reduce the area of column data paths since they require small areas.In addition,we secure device reliability by using HV(high-voltage)transistors in the WL driver.Furthermore,we change from a static logic to a dynamic logic used for the WL driver in the core circuit.Also,we optimize the WD(write data)switch circuit.Thus,we can implement them with a small-area design.In addition,we implement the address predecoder with a small-area logic circuit.The area of the designed 32 kbit OTP with 5V and HV devices is 674.725μm×258.75μm(=0.1745mm2)and is 56.3% smaller than that using 3.3V devices.展开更多
配电系统中无功负载的投切会使公共耦合点(point of common coupling,PCC)电压发生波动。为了提高配电网的电压质量,该文详细分析了基于模块化多电平换流器的静止同步补偿器(static synchronous compensator-modular multilevel convert...配电系统中无功负载的投切会使公共耦合点(point of common coupling,PCC)电压发生波动。为了提高配电网的电压质量,该文详细分析了基于模块化多电平换流器的静止同步补偿器(static synchronous compensator-modular multilevel converters,MMC-STATCOM)的PCC电压调节原理,采用带有无功电流指令值反馈环路的PCC电压下垂控制方法,根据输出无功电流指令乘以可控的变换器等效阻抗以实时修正PCC电压参考值。与传统的基于输出无功电流反馈值的下垂控制方法相比,该文提出的下垂调节方法不受电流内环控制性能的影响,PCC电压可以根据装置补偿容量与负载特性在可以接受的一定范围内波动。同时,MMC-STATCOM采用3个环路的均压控制策略以维持每个子模块的电容电压平衡。基于Matlab/Simulink平台的仿真结果,以及基于60 V/2 k VA实验样机的实验结果,验证了该文PCC电压下垂控制方法的正确性与有效性。展开更多
针对一类无法获知精确数学模型的过程对象,采用模糊自适应PID控制算法。该算法不需要精确的对象数学模型,同时保留了传统PID算法的优点,还能根据输入与输出的偏差值,基于模糊规则在线调整PID参数,在Matlab上进行相应的仿真验证,结果表...针对一类无法获知精确数学模型的过程对象,采用模糊自适应PID控制算法。该算法不需要精确的对象数学模型,同时保留了传统PID算法的优点,还能根据输入与输出的偏差值,基于模糊规则在线调整PID参数,在Matlab上进行相应的仿真验证,结果表明提高了控制品质。在B&R公司的可编程计算机控制器(PCC)上开发相应模块,用Automation Studio BASIC语言编写了控制程序,并完成了对一套实际温度对象的控制。实验结果表明,此算法具有较好的跟踪性能、抗干扰性和鲁棒性,适于工业应用。展开更多
基金Project supported by the Second Stage of Brain Korea 21 Projects,Korea
文摘A 32 kbit OTP(one-time programmable)memory for MCUs(micro-controller units)used in remote controllers was designed.This OTP memory is used for program and data storage.It is required to apply 5.5V to BL(bit-line)and 11V to WL(word-line)for a OTP cell of 0.35μm ETOX(EEPROM tunnel oxide)type by MagnaChip.We use 5V transistors on column data paths to reduce the area of column data paths since they require small areas.In addition,we secure device reliability by using HV(high-voltage)transistors in the WL driver.Furthermore,we change from a static logic to a dynamic logic used for the WL driver in the core circuit.Also,we optimize the WD(write data)switch circuit.Thus,we can implement them with a small-area design.In addition,we implement the address predecoder with a small-area logic circuit.The area of the designed 32 kbit OTP with 5V and HV devices is 674.725μm×258.75μm(=0.1745mm2)and is 56.3% smaller than that using 3.3V devices.
文摘光束线站真空安全联锁是保障同步辐射光源储存环的运行安全与线站关键设备安全的重要系统。文章阐述了合肥光源新建成的金华光束线站真空安全联锁系统的最新设计方法。基于新型的高性能可编程控制器PLC(Programmable Logic Controller)和开放的软件平台EPICS 7(Experimental Physics and Industrial Control System)分布式控制系统架构,同时采用虚拟化技术,开发了全新的光束线站真空安全联锁系统。在系统远控的OPI界面开发上,采用Python脚本一键自动生成,提高了系统开发效率。此次设计在确保系统安全性和可靠性的同时,系统的性能以及用户人机交互的体验都得以提升。这些设计方法为正在建设的合肥先进光源的光束线站控制提供了技术储备和实践经验。
文摘配电系统中无功负载的投切会使公共耦合点(point of common coupling,PCC)电压发生波动。为了提高配电网的电压质量,该文详细分析了基于模块化多电平换流器的静止同步补偿器(static synchronous compensator-modular multilevel converters,MMC-STATCOM)的PCC电压调节原理,采用带有无功电流指令值反馈环路的PCC电压下垂控制方法,根据输出无功电流指令乘以可控的变换器等效阻抗以实时修正PCC电压参考值。与传统的基于输出无功电流反馈值的下垂控制方法相比,该文提出的下垂调节方法不受电流内环控制性能的影响,PCC电压可以根据装置补偿容量与负载特性在可以接受的一定范围内波动。同时,MMC-STATCOM采用3个环路的均压控制策略以维持每个子模块的电容电压平衡。基于Matlab/Simulink平台的仿真结果,以及基于60 V/2 k VA实验样机的实验结果,验证了该文PCC电压下垂控制方法的正确性与有效性。
文摘针对一类无法获知精确数学模型的过程对象,采用模糊自适应PID控制算法。该算法不需要精确的对象数学模型,同时保留了传统PID算法的优点,还能根据输入与输出的偏差值,基于模糊规则在线调整PID参数,在Matlab上进行相应的仿真验证,结果表明提高了控制品质。在B&R公司的可编程计算机控制器(PCC)上开发相应模块,用Automation Studio BASIC语言编写了控制程序,并完成了对一套实际温度对象的控制。实验结果表明,此算法具有较好的跟踪性能、抗干扰性和鲁棒性,适于工业应用。
