Within the framework of achieving carbon neutrality,various industries are confronted with fresh challenges.The ongoing process of downsizing coal industry operations has evolved into a new phase,with the burgeoning p...Within the framework of achieving carbon neutrality,various industries are confronted with fresh challenges.The ongoing process of downsizing coal industry operations has evolved into a new phase,with the burgeoning proliferation of abandoned mines posing a persistent issue.Addressing the challenges and opportunities presented by these abandoned mines,this paper advocates for a scientific approach centered on the advancement of pumped storage energy alongside gas-oil complementary energy.Leveraging abandoned mine tunnels to establish pumped storage power stations holds significant ecological and economic importance for repurposing these sites.This initiative not only serves as an effective means to restore the ecological balance in mining regions but also provides an environmentally friendly approach to repurposing abandoned mine tunnels,offering a blueprint for economically viable pumped storage power stations.This article delineates five crucial scientific considerations and outlines seven primary models for the utilization of abandoned mine sites,delineating a novel,comprehensive pathway for energy and power development that emphasizes multi-energy complementarity and synergistic optimization within abandoned mines.展开更多
This paper presented a preliminary research on the central solar heating system with seasonal storage(CSHSSS)used in cold climate in China.A mathematical model of the solar energy seasonal storage water tank used in t...This paper presented a preliminary research on the central solar heating system with seasonal storage(CSHSSS)used in cold climate in China.A mathematical model of the solar energy seasonal storage water tank used in the central solar heating system was firstly developed based on energy conservation.This was followed by the simulation of the CSHSSS used in a two-floor villa in Harbin,and analysis of the impacts on storage water temperature of tank volume,solar collector area,tank burial depth,insulation thickness around the tank,etc.The results show there is a relatively economical tank volume to optimize the system efficiency,which decreases with increasing tank volume at the constant collector area,and increases with increasing collector area at the constant tank volume.Furthermore,the insulation thickness has obvious effect on avoiding heat loss,while the tank burial depth doesn't.In addition,the relationship between the solar collector efficiency and storage water temperature is also obtained,it decreases quickly with increasing storing water temperature,and then increases slowly after starting space heating system.These may be helpful for relevant design and optimization in cold climates in China and all over the world.展开更多
The development of sustainable electrode materials for energy storage systems has become very important and porous carbons derived from biomass have become an important candidate because of their tunable pore structur...The development of sustainable electrode materials for energy storage systems has become very important and porous carbons derived from biomass have become an important candidate because of their tunable pore structure,environmental friendliness,and cost-effectiveness.Recent advances in controlling the pore structure of these carbons and its relationship between to is energy storage performance are discussed,emphasizing the critical role of a balanced distribution of micropores,mesopores and macropores in determining electrochemical behavior.Particular attention is given to how the intrinsic components of biomass precursors(lignin,cellulose,and hemicellulose)influence pore formation during carbonization.Carbonization and activation strategies to precisely control the pore structure are introduced.Finally,key challenges in the industrial production of these carbons are outlined,and future research directions are proposed.These include the establishment of a database of biomass intrinsic structures and machine learning-assisted pore structure engineering,aimed at providing guidance for the design of high-performance carbon materials for next-generation energy storage devices.展开更多
When the capacitor cell is discharged in the short-circuit mode, the current pulse amplitude and duration are maximal. Therefore, this mode is the most severe for discharge switches of capacitive energy storage. The c...When the capacitor cell is discharged in the short-circuit mode, the current pulse amplitude and duration are maximal. Therefore, this mode is the most severe for discharge switches of capacitive energy storage. The characteristics of the transient process of the discharge capacitive energy storage and the current loads acting in the facility discharge circuit have been defined for this mode. The test bench for definition of the LTT(Light Triggered Thyristors) loading capacity is described. The limiting characteristics have been experimentally obtained for LTT, at which there emerges the thermo-generation peak.The process of OFF-ON switching of LTTs has been investigated, the necessity is shown to use the speedup R-C circuits to ensure fast and stable transition of LTT into the conducting state. The design of the switch unit for the capacitive energy storage comprising LTTs and crowbar diodes is described, and the transient processes of current switching in crowbar diodes are considered. The tests carried out during switching of pul se current up to 100 kA at a voltage of 6 kV have confirmed the workability of the switch unit.展开更多
The conceptual design of the capacitive energy storage intended for operation in laboratory conditions is considered. This capacitive energy storage includes the capacitor cells of 200 kJ stored energy, each incorpora...The conceptual design of the capacitive energy storage intended for operation in laboratory conditions is considered. This capacitive energy storage includes the capacitor cells of 200 kJ stored energy, each incorporating one self-healing high-energy-density capacitor, one semiconducting switch unit on the basis of Light Triggered Thyristors(LTT) and the pulse diodes, as well as the toroid inductor. Power supply of the capacitive energy storage is provided by high voltage(HV) 3 x 10 kV, 50 Hz industrial electrical network, using the HV power transformer and phase-controlled rectifier. Special design for the capacitor cell and the module of capacitor cells is proposed, which provides easy access to all components of the capacitor cells during operation and maintenance. Control system of the capacitive energy system has a hierarchic structure and includes programmable logic controller(PLC), programmer for non-synchronous triggering of capacitor cells discharges and data acquisition system.展开更多
In recent years, advanced control technologies have been used for the optimum control of a cold storage. But there are still a lot of shortcomings. One of the main problems is that the traditional methods can't re...In recent years, advanced control technologies have been used for the optimum control of a cold storage. But there are still a lot of shortcomings. One of the main problems is that the traditional methods can't realize the on-line predictive optimum control of a refrigerating system with simple and valid algorithms. An RBF neural network has a strong ability in nonlinear mapping, a good interpolating value performance, and a higher training speed. Thus a two-stage RBF neural network is proposed in this paper. Combining the measured values with the predicted values, the two-stage RBF neural network is used for the on-line predictive optimum control of the cold storage temperature. The application results of the new methods show a great success.展开更多
The explosive initiator is one kind of sensitivity products with long life and high reliability.In order to improve the storage reliability assessment,the method of storage reliability assessment for explosive initiat...The explosive initiator is one kind of sensitivity products with long life and high reliability.In order to improve the storage reliability assessment,the method of storage reliability assessment for explosive initiator was proposed based on time series model using the sensitivity test data.In the method,the up and down test was used to estimate the distribution parameters of threshold.And an approach to design the up and down test was present to draw better estimations.Furthermore,the method of shrinkage estimation was introduced to get a better estimation of scale parameter by combining the sample information with prior information.The simulation result shows that the shrinkage estimation is better than traditional estimation under certain conditions.With the distribution parameters estimations,the time series models were used to describe the changing trends of distribution parameters along with storage time.Then for a fixed storage time,the distribution parameters were predicted based on the models.Finally,the confidence interval of storage reliability was obtained by fiducial inference.The illustrative example shows that the method is available for storage reliability assessment of the explosive initiator with high reliability.展开更多
基金Project(202208340045)supported by the China Scholarship Council FundProject(U21A20110)supported by the Regional Innovation and Development Joint Fund of National Natural Science Foundation of China+1 种基金Project(EUCMR202201)supported by the Open Project Program of Anhui Engineering Research Center of Exploitation and Utilization of Closed/abandoned Mine Resources,ChinaProject(2023cxcyzx063)supported by the Anhui Province New Era Talent Education Project,China。
文摘Within the framework of achieving carbon neutrality,various industries are confronted with fresh challenges.The ongoing process of downsizing coal industry operations has evolved into a new phase,with the burgeoning proliferation of abandoned mines posing a persistent issue.Addressing the challenges and opportunities presented by these abandoned mines,this paper advocates for a scientific approach centered on the advancement of pumped storage energy alongside gas-oil complementary energy.Leveraging abandoned mine tunnels to establish pumped storage power stations holds significant ecological and economic importance for repurposing these sites.This initiative not only serves as an effective means to restore the ecological balance in mining regions but also provides an environmentally friendly approach to repurposing abandoned mine tunnels,offering a blueprint for economically viable pumped storage power stations.This article delineates five crucial scientific considerations and outlines seven primary models for the utilization of abandoned mine sites,delineating a novel,comprehensive pathway for energy and power development that emphasizes multi-energy complementarity and synergistic optimization within abandoned mines.
基金Supported by Multi-Discipline Scientific Rearch Foundation of Harbin Institute of Technology(HIT MD2003.1)Postdoctoral Scientific Rearch Foundation of Heilongjiang Provine(LBH-Q06066)
文摘This paper presented a preliminary research on the central solar heating system with seasonal storage(CSHSSS)used in cold climate in China.A mathematical model of the solar energy seasonal storage water tank used in the central solar heating system was firstly developed based on energy conservation.This was followed by the simulation of the CSHSSS used in a two-floor villa in Harbin,and analysis of the impacts on storage water temperature of tank volume,solar collector area,tank burial depth,insulation thickness around the tank,etc.The results show there is a relatively economical tank volume to optimize the system efficiency,which decreases with increasing tank volume at the constant collector area,and increases with increasing collector area at the constant tank volume.Furthermore,the insulation thickness has obvious effect on avoiding heat loss,while the tank burial depth doesn't.In addition,the relationship between the solar collector efficiency and storage water temperature is also obtained,it decreases quickly with increasing storing water temperature,and then increases slowly after starting space heating system.These may be helpful for relevant design and optimization in cold climates in China and all over the world.
文摘The development of sustainable electrode materials for energy storage systems has become very important and porous carbons derived from biomass have become an important candidate because of their tunable pore structure,environmental friendliness,and cost-effectiveness.Recent advances in controlling the pore structure of these carbons and its relationship between to is energy storage performance are discussed,emphasizing the critical role of a balanced distribution of micropores,mesopores and macropores in determining electrochemical behavior.Particular attention is given to how the intrinsic components of biomass precursors(lignin,cellulose,and hemicellulose)influence pore formation during carbonization.Carbonization and activation strategies to precisely control the pore structure are introduced.Finally,key challenges in the industrial production of these carbons are outlined,and future research directions are proposed.These include the establishment of a database of biomass intrinsic structures and machine learning-assisted pore structure engineering,aimed at providing guidance for the design of high-performance carbon materials for next-generation energy storage devices.
文摘When the capacitor cell is discharged in the short-circuit mode, the current pulse amplitude and duration are maximal. Therefore, this mode is the most severe for discharge switches of capacitive energy storage. The characteristics of the transient process of the discharge capacitive energy storage and the current loads acting in the facility discharge circuit have been defined for this mode. The test bench for definition of the LTT(Light Triggered Thyristors) loading capacity is described. The limiting characteristics have been experimentally obtained for LTT, at which there emerges the thermo-generation peak.The process of OFF-ON switching of LTTs has been investigated, the necessity is shown to use the speedup R-C circuits to ensure fast and stable transition of LTT into the conducting state. The design of the switch unit for the capacitive energy storage comprising LTTs and crowbar diodes is described, and the transient processes of current switching in crowbar diodes are considered. The tests carried out during switching of pul se current up to 100 kA at a voltage of 6 kV have confirmed the workability of the switch unit.
文摘The conceptual design of the capacitive energy storage intended for operation in laboratory conditions is considered. This capacitive energy storage includes the capacitor cells of 200 kJ stored energy, each incorporating one self-healing high-energy-density capacitor, one semiconducting switch unit on the basis of Light Triggered Thyristors(LTT) and the pulse diodes, as well as the toroid inductor. Power supply of the capacitive energy storage is provided by high voltage(HV) 3 x 10 kV, 50 Hz industrial electrical network, using the HV power transformer and phase-controlled rectifier. Special design for the capacitor cell and the module of capacitor cells is proposed, which provides easy access to all components of the capacitor cells during operation and maintenance. Control system of the capacitive energy system has a hierarchic structure and includes programmable logic controller(PLC), programmer for non-synchronous triggering of capacitor cells discharges and data acquisition system.
文摘In recent years, advanced control technologies have been used for the optimum control of a cold storage. But there are still a lot of shortcomings. One of the main problems is that the traditional methods can't realize the on-line predictive optimum control of a refrigerating system with simple and valid algorithms. An RBF neural network has a strong ability in nonlinear mapping, a good interpolating value performance, and a higher training speed. Thus a two-stage RBF neural network is proposed in this paper. Combining the measured values with the predicted values, the two-stage RBF neural network is used for the on-line predictive optimum control of the cold storage temperature. The application results of the new methods show a great success.
文摘The explosive initiator is one kind of sensitivity products with long life and high reliability.In order to improve the storage reliability assessment,the method of storage reliability assessment for explosive initiator was proposed based on time series model using the sensitivity test data.In the method,the up and down test was used to estimate the distribution parameters of threshold.And an approach to design the up and down test was present to draw better estimations.Furthermore,the method of shrinkage estimation was introduced to get a better estimation of scale parameter by combining the sample information with prior information.The simulation result shows that the shrinkage estimation is better than traditional estimation under certain conditions.With the distribution parameters estimations,the time series models were used to describe the changing trends of distribution parameters along with storage time.Then for a fixed storage time,the distribution parameters were predicted based on the models.Finally,the confidence interval of storage reliability was obtained by fiducial inference.The illustrative example shows that the method is available for storage reliability assessment of the explosive initiator with high reliability.
