Nano-ZnO particle （nZnOp） reinforced polyethylene glycol （PEG）/polyethylene terephthalate （PET） （nZnOp/PEG/PET） copolymeric composites with different mass fractions and molecular weights of PEG are synthesized...Nano-ZnO particle （nZnOp） reinforced polyethylene glycol （PEG）/polyethylene terephthalate （PET） （nZnOp/PEG/PET） copolymeric composites with different mass fractions and molecular weights of PEG are synthesized via in-situ polymerization. The dispersion of nZnOp in copolymer matrixes and the effects of PEG and nZnOp particles on the crystallization behavior of the composites are studied by TEM, differential scanning calorimetry（DSC）, XRD and Fourier thansform infrared spectroscopy （FTIR ）. The results reveal that nZnOp particles are dispersed in the matrixes with nano-scale, and the addition of PEG induces more homogeneous dispersion of nZnOp. Simultaneously, these nanoparticles become nucleating centers during the crystallization of the matrixes. PEG segments can improve the flexibility of the PET molecular chain, resulting in the drop of the cold crystallization temperature and the rise of the crystallization rate of the composites. Furthermore, PEG （4 000） with the mass fraction of 10% can promote the crystallization rate of the composites. The mechanical properties show that the nano-particles strengthen and toughen the PET matrix, whereas PEG weakens these improve- ments.展开更多
ZnO nanoparticles with an average size of 125 nm were prepared via homogeneous precipitation method and were characterized by SEM.The products were surface-modified by the surfactant SDS.Surface-modified nano particle...ZnO nanoparticles with an average size of 125 nm were prepared via homogeneous precipitation method and were characterized by SEM.The products were surface-modified by the surfactant SDS.Surface-modified nano particles were added at a mass ratio of 1.0%,2.0%,3.0%,and 4.0%,respectively,in base oil and their friction and wear behaviors were evaluated on a MRS-10D type four-ball wear tester.After four-ball wear tests,the morphology of the rubbing surfaces was evaluated with metallographic microscope.It was revealed that the modified nano ZnO had excellent behavior for improving anti-wear property and friction coefficient,which could greatly reduce the friction of machine parts.展开更多
ZnO nano-particles were synthesized via an ammonical ammonium carbonate solution by precipitation method in presence of some additives such as urea, oleic and stearic acid. The morphology and crystallinity of the obta...ZnO nano-particles were synthesized via an ammonical ammonium carbonate solution by precipitation method in presence of some additives such as urea, oleic and stearic acid. The morphology and crystallinity of the obtained zinc oxide particles depend critically on the type of additive which was used. Additives also affected the crystal orientation of precipitate nano-particles. SEM, XRD, BET and UV-visible were used to characterize morphology, microstructure, specific surface area and optical properties of the products.Photo-catalysis properties of the as-prepared ZnO powders were evaluated by degradation of methyl red(acid red) in aqueous solution exposed to UV-light. Results suggested a close relationship among the morphology,size and surface area on photo-catalysis and optical properties of the particles. The widest Egvalue(3.56 e V),highest degradation and decolorization efficiency(99%) were obtained from a sample with the smallest grain size(largest surface area) which were used urea as an additive.展开更多
ZnO micro/nano complex structure films, including reticulate papillary nodes, petal-like and flake-hole, have been self-assembled by a hydrothermal technique at different temperatures without metal catalysts. The wett...ZnO micro/nano complex structure films, including reticulate papillary nodes, petal-like and flake-hole, have been self-assembled by a hydrothermal technique at different temperatures without metal catalysts. The wettability of the above film surfaces was modified with a simple coating of heptadecafluorodecyltrimethoxy-silane in toluene. After modifying, the surface of ZnO film grown at 50℃ was converted from superhydrophilic with a water contact angle lower than 5° to superhydrophobic with a water contact angle of 165° Additionally, the surface of reticulate papillary nodes ZnO film grown at 100 ℃ had excellent superhydrophobicity, with a water contact angle of 173° and a sliding angle lower than 2° Furthermore, the water contact angle on the surface of petal-like and flake-hole ZnO films grown at 150℃ and 200℃ were found to be 140° and 120°, respectively. The wettability for the samples was found to depend strongly on the surface morphology which results from the growth temperature.展开更多
The hydrophobicity of the lotus leaf is mainly due to its surface micro-nano composite structure. In order to mimic the lotus structure, ZnO micro-nano composite hydrophobic films were prepared via the three-step meth...The hydrophobicity of the lotus leaf is mainly due to its surface micro-nano composite structure. In order to mimic the lotus structure, ZnO micro-nano composite hydrophobic films were prepared via the three-step method. On thin buffer films of SiO2, which were first fabricated on glass substrates by the so,gel dip-coating method, a ZnO seed layer was deposited via RF magnetron sputtering. Then two different ZnO films, micro-nano and micro-only flowerlike structures, were grown by the hydrothermal method. The prepared films have different hydrophobic properties after surface modification. The structures of the obtained ZnO films were characterized using x-ray diffraction and field-emission scanning electron microscopy. A conclusion that a micro-nano composite structure is more beneficial to hydrophobicity than a micro-only structure was obtained through research into the effect of structure on hydrophobic properties.展开更多
基金Supported by the Program of Jiangsu Development & Reform Commission(2005)the Industrial-ization Boosting Program of College Scientific Reserach Achievements of the Education Department of Jiangsu Province(JHB06-03)~~
文摘Nano-ZnO particle （nZnOp） reinforced polyethylene glycol （PEG）/polyethylene terephthalate （PET） （nZnOp/PEG/PET） copolymeric composites with different mass fractions and molecular weights of PEG are synthesized via in-situ polymerization. The dispersion of nZnOp in copolymer matrixes and the effects of PEG and nZnOp particles on the crystallization behavior of the composites are studied by TEM, differential scanning calorimetry（DSC）, XRD and Fourier thansform infrared spectroscopy （FTIR ）. The results reveal that nZnOp particles are dispersed in the matrixes with nano-scale, and the addition of PEG induces more homogeneous dispersion of nZnOp. Simultaneously, these nanoparticles become nucleating centers during the crystallization of the matrixes. PEG segments can improve the flexibility of the PET molecular chain, resulting in the drop of the cold crystallization temperature and the rise of the crystallization rate of the composites. Furthermore, PEG （4 000） with the mass fraction of 10% can promote the crystallization rate of the composites. The mechanical properties show that the nano-particles strengthen and toughen the PET matrix, whereas PEG weakens these improve- ments.
基金supported by Liaoning Provincial Office of Education for Innovation Team (Project number:2006T001)Liaoning Province of Key Laboratory Project (Project number:2008403001)
文摘ZnO nanoparticles with an average size of 125 nm were prepared via homogeneous precipitation method and were characterized by SEM.The products were surface-modified by the surfactant SDS.Surface-modified nano particles were added at a mass ratio of 1.0%,2.0%,3.0%,and 4.0%,respectively,in base oil and their friction and wear behaviors were evaluated on a MRS-10D type four-ball wear tester.After four-ball wear tests,the morphology of the rubbing surfaces was evaluated with metallographic microscope.It was revealed that the modified nano ZnO had excellent behavior for improving anti-wear property and friction coefficient,which could greatly reduce the friction of machine parts.
文摘ZnO nano-particles were synthesized via an ammonical ammonium carbonate solution by precipitation method in presence of some additives such as urea, oleic and stearic acid. The morphology and crystallinity of the obtained zinc oxide particles depend critically on the type of additive which was used. Additives also affected the crystal orientation of precipitate nano-particles. SEM, XRD, BET and UV-visible were used to characterize morphology, microstructure, specific surface area and optical properties of the products.Photo-catalysis properties of the as-prepared ZnO powders were evaluated by degradation of methyl red(acid red) in aqueous solution exposed to UV-light. Results suggested a close relationship among the morphology,size and surface area on photo-catalysis and optical properties of the particles. The widest Egvalue(3.56 e V),highest degradation and decolorization efficiency(99%) were obtained from a sample with the smallest grain size(largest surface area) which were used urea as an additive.
基金Project supported by the 973 Program of China (Grant No. 2006CB302900)National Natural Science Foundation of China(Grant No. 50872129)
文摘ZnO micro/nano complex structure films, including reticulate papillary nodes, petal-like and flake-hole, have been self-assembled by a hydrothermal technique at different temperatures without metal catalysts. The wettability of the above film surfaces was modified with a simple coating of heptadecafluorodecyltrimethoxy-silane in toluene. After modifying, the surface of ZnO film grown at 50℃ was converted from superhydrophilic with a water contact angle lower than 5° to superhydrophobic with a water contact angle of 165° Additionally, the surface of reticulate papillary nodes ZnO film grown at 100 ℃ had excellent superhydrophobicity, with a water contact angle of 173° and a sliding angle lower than 2° Furthermore, the water contact angle on the surface of petal-like and flake-hole ZnO films grown at 150℃ and 200℃ were found to be 140° and 120°, respectively. The wettability for the samples was found to depend strongly on the surface morphology which results from the growth temperature.
基金supported by the Science Fund of Anhui Province,China(Grant No 070414187)the National Fund for Fostering Talents in Basic Science of China(Grant No J0630319/J0103)
文摘The hydrophobicity of the lotus leaf is mainly due to its surface micro-nano composite structure. In order to mimic the lotus structure, ZnO micro-nano composite hydrophobic films were prepared via the three-step method. On thin buffer films of SiO2, which were first fabricated on glass substrates by the so,gel dip-coating method, a ZnO seed layer was deposited via RF magnetron sputtering. Then two different ZnO films, micro-nano and micro-only flowerlike structures, were grown by the hydrothermal method. The prepared films have different hydrophobic properties after surface modification. The structures of the obtained ZnO films were characterized using x-ray diffraction and field-emission scanning electron microscopy. A conclusion that a micro-nano composite structure is more beneficial to hydrophobicity than a micro-only structure was obtained through research into the effect of structure on hydrophobic properties.
