Polypropylene(PP) fibres have primarily used to control shrinkage cracks or mitigate explosive spalling in concrete structures exposed to fire or subjected to impact/blast loads, with limited investigations on capacit...Polypropylene(PP) fibres have primarily used to control shrinkage cracks or mitigate explosive spalling in concrete structures exposed to fire or subjected to impact/blast loads, with limited investigations on capacity improvement. This study unveils the possibility of using PP micro-fibres to improve the impact behaviour of fibre-reinforced ultra-high-performance concrete(FRUHPC) columns. Results show that the addition of fibres significantly improves the impact behaviour of FRUHPC columns by shifting the failure mechanism from brittle shear to favourable flexural failure. The addition of steel or PP fibres affected the impact responses differently. Steel fibres considerably increased the peak impact force(up to 18%) while PP micro-fibres slightly increased the peak(3%-4%). FRUHPC significantly reduced the maximum midheight displacement by up to 30%(under 20°impact) and substantially improved the displacement recovery by up to 100%(under 20° impact). FRUHPC with steel fibres significantly improved the energy absorption while those with PP micro-fibres reduced the energy absorption, which is different from the effect of PP-macro fibre reported in the literature. The optimal fibre content for micro-PP fibres is 1% due to its minimal fibre usage and low peak and residual displacement. This study highlights the potential of FRUHPC as a promising material for impact-resistant structures by creating a more favourable flexural failure mechanism, enhancing ductility and toughness under impact loading, and advancing the understanding of the role of fibres in structural performance.展开更多
Results The population had large variations for lint yield,fibre properties,predicted yarn properties,and composite fibre quality values.Lint yield with all fibre quality traits was not correlated.When the selection w...Results The population had large variations for lint yield,fibre properties,predicted yarn properties,and composite fibre quality values.Lint yield with all fibre quality traits was not correlated.When the selection was conducted first to keep those with improved fibre quality,and followed for high yields,a large proportion in the resultant populations was the same between selections based on Cottonspec predicted yarn quality and HVI-measured fibre properties.They both exceeded the selection based on FQI and Background The approach of directly testing yarn quality to define fibre quality breeding objectives and progress the selection is attractive but difficult when considering the need for time and labour.The question remains whether yarn prediction tools from textile research can serve as an alternative.In this study,using a dataset from three seasons of field testing recombinant inbred line population,Cottonspec,a software developed by the Commonwealth Scientific and Industrial Research Organisation(CSIRO)for predicting ring spun yarn quality from fibre properties measured by High Volume Instrument(HVI),was used to select improved fibre quality and lint yield in the population.The population was derived from an advanced generation inter-crossing of four CSIRO conventional commercial varieties.The Cottonspec program was able to provide an integrated index of the fibre qualities affecting yarn properties.That was compared with selection based on HVI-measured fibre properties,and two composite fibre quality variables,namely,fibre quality index(FQI),and premium and discount(PD)points.The latter represents the net points of fibre length,strength,and micronaire based on the Premiums and Discounts Schedule used in the market while modified by the inclusion of elongation.PD points.Conclusions The population contained elite segregants with improved yield and fibre properties,and Cottonspec predicted yarn quality is useful to effectively capture these elites.There is a need to further develop yarn quality prediction tools through collaborative efforts with textile mills,to draw better connectedness between fibre and yarn quality.This connection will support the entire cotton value chain research and evolution.展开更多
The impact properties of normal concrete (NC) and reinforced concrete (RC) specimens,steel fibre reinforced concrete (SFRC) specimens and RC+SFRC specimens with different steel fibre dosages were investigated with the...The impact properties of normal concrete (NC) and reinforced concrete (RC) specimens,steel fibre reinforced concrete (SFRC) specimens and RC+SFRC specimens with different steel fibre dosages were investigated with the drop-weight impact test recommended by ACI Committee 544.The results indicate that the number of blows to final failure is greatly increased by addition of steel fibres.Moreover,the combination of steel fibres and steel rebars demonstrates a significant positive composite effect on the impact resistance,which results in the improvement in impact toughness of concrete specimens.In the view of variation of impact test results,the two-parameter Weibull distribution was adopted to analyze the experimental data.It is proved that the probabilistic distributions of the blows to first crack and to final failure of six types of samples approximately follow two-parameter Weibull distribution.展开更多
The effect of microwave treatment on the tensile properties of treated sugar palm fibre with 6% NaOH reinforced thermoplastic polyurethane composites was investigated. Firstly, the sugar palm fibres were treated by 6%...The effect of microwave treatment on the tensile properties of treated sugar palm fibre with 6% NaOH reinforced thermoplastic polyurethane composites was investigated. Firstly, the sugar palm fibres were treated by 6% alkali solution. Then, microwave treatment was used to treat the alkali treated sugar palm fibres. Three types of temperatures(i.e. 70, 80 and 90℃) were applied in microwave treatment. The extruder and hot press machines were used to mixing the sugar palm fibres and polyurethane resin, and fabricate the composites. Tensile properties(i.e. tensile strength, tensile modulus and elongation at break) were studied by following the ASTM D-638 standard. The highest tensile strength was recorded 18.42 MPa with microwave temperature at 70℃ and 6% alkali pre-treatment. Therefore, the temperature 70℃ of microwave treatment may consider the best degree cent grate.展开更多
Background Gossypium barbadense L.has specific fibre in terms of its length,strength,and fineness,and known as extra-long staple(ELS) cotton,Sea–Island cotton,or Egyptian cotton.Narrow genetic base with less genetic ...Background Gossypium barbadense L.has specific fibre in terms of its length,strength,and fineness,and known as extra-long staple(ELS) cotton,Sea–Island cotton,or Egyptian cotton.Narrow genetic base with less genetic variability is observed in G.barbadense germplasm.Hence,this study was aimed to evaluate the genetic variability present in 108 germplasm accessions of G.barbadense and to identify the superior genotypes based on the fibre traits.Results We evaluated 108 accessions for five fibre quality traits along with three checks in augmented block design.All fibre traits showed significant differences among genotypes,indicating that there is genetic potential for improvement.Fibre strength and micronaire(MIC) showed high phenotypic and genotypic coefficients of variation.High heritability combined with high genetic advance as percentage of mean(GAM) was recorded for fibre length,strength,and micronaire.Fibre strength and fibre length were significantly correlated with each other,while both showed negative correlation with micronaire.Principal component analysis and Biplot analysis showed that uniformity index discriminated all the genotypes in higher level,while fibre length and strength were medium in discrimination power.Biplot revealed genotypes DB 16,EC959191,GSB 39,ARBB 20,5746U,EA 203,and EA 201 were genetically diverse.Hierarchal cluster analysis based on unweighted paired group method using arithmetic average(UPGMA) grouped the genotypes into four clusters,with each cluster consisting of 4,18,48,and 38 genotypes,respectively.Conclusion Among the genotypes,34 for fibre length(> 35 mm),18 for fibre strength(> 40.4 g·tex^(-1)) and 66 for micronaire(3.7-4.2,A grade) were identified as potential accessions based on their superiority.The superior fibre genotypes identified in this study are potential lines for the ELS cotton breeding program.展开更多
The nitrogen(N)requirements of cotton are well understood and have been extensively studied since 1887,with practical guides,decision support systems,models and recent reviews providing information on the importance o...The nitrogen(N)requirements of cotton are well understood and have been extensively studied since 1887,with practical guides,decision support systems,models and recent reviews providing information on the importance of providing cotton crops with a sufficient supply of nutrients and improving nitrogen use efficiency.Given that the financial return to the grower depends on both the cotton quantity and quality and the growing importance of the latter,this review focusses specifically on information and knowledge about the effect of nitrogen application level on fibre quality.展开更多
Experimental quasi-static crushing tests were conducted by using a universal testing machine format kenaf-epoxy composite elliptical cones. The work focused on the vertex angle's effects on energy absorption capab...Experimental quasi-static crushing tests were conducted by using a universal testing machine format kenaf-epoxy composite elliptical cones. The work focused on the vertex angle's effects on energy absorption capability; the vertex angles vary from 0° to 24° in 6 increments. The failure modes of the kenaf fibre epoxy composite elliptical cones were observed utilising delegate photos taken during the quasistatic crushing test. Load-deformation curves and deformation histories of typical specimens are presented and discussed. Moreover, the effects of cone vertex angles on the load carrying capacity and the energy absorption capability are also discussed. The results show that the energy absorption abilities significantly influence the ellipticity vertex angle as the load carrying capacity. We concluded that the quasi-static axial crushing behaviour of elliptical mat laminated composite cones is strongly affected by their structural geometry and the specific energy absorbed by the composite elliptical cones with vertex angles of 6°, 12°, 18°, and 24°, which is more than an elliptical cone with the vertex angle of 0°(the elliptical tube) at any given deformation. However, the specific energy absorption for the elliptical composite cone showed a positive correlation, i.e., the more the angle increased, the more energy was absorbed. In this regard, an elliptical composite cone with a 24° angle exhibited the best energy absorption capability.展开更多
Background:Cotton seed fibres are long single-celled epidermal trichomes that first appear on the surface of the ovule at anthesis and then elongate rapidly over a period of 15-25 days until a secondary cell wall(SCW)...Background:Cotton seed fibres are long single-celled epidermal trichomes that first appear on the surface of the ovule at anthesis and then elongate rapidly over a period of 15-25 days until a secondary cell wall(SCW)begins to develop through a rapid increase in the deposition of microfibrillar cellulose between the plasma membrane and the primary cell wall that eventually terminates elongation.Quantitative measurements of the different polysaccharide components in both wall types over time and how they influence fibre quality can direct studies involved in enhanc-ing fibre properties for yarn quality through cell wall manipulation or molecular breeding.Results:A detailed chemical analysis of cell wall composition by differential solvent fractionation was used to identify the range of polysaccharides present in mature cotton fibres and used to validate a simpler total cell wall monosaccharide linkage analysis protocol for wall compositional analysis.Analysis of fibres from 5 days post-anthesis through maturity for three cultivated species,Gossypium hirsutum,G.barbadense,and G.arboreum,showed the dynamic nature of cell wall polysaccharide composition through fibre development and that it progressed differently for each species.Plants grown in the glasshouse during either autumn to winter or spring to summer and within each species had fibre qualities and temporal aspects of cell wall development that were different for each season.Notably,the timing of the deposition of the SCW was delayed in winter grown plants and appeared to influence key fibre qual-ity properties.Conclusions:These results suggest that the temporal aspects of cell wall polysaccharide biogenesis during fibre development influence final fibre quality,and this timing is determined by both genetic and environmental factors.The onset of SCW synthesis appears to be a critical factor coinciding with termination of fibre elongation and specify-ing the duration of wall thickening that then affects fibre length and other wall-associated quality parameters that ultimately determine yarn quality.展开更多
In recent years there has been interest in using flax fibres to produce composites because of a number of attributes, including low density, biodegradability and high mechanical properties. It was found that treatment...In recent years there has been interest in using flax fibres to produce composites because of a number of attributes, including low density, biodegradability and high mechanical properties. It was found that treatment of flax fibres may be required to improve the bond quality with a resin. These treatments also have an impact on the properties of the fibres themselves. The objective of this project was to evaluate the impact of three treatment methods on the mechanical properties of flax fibres. The three treatment methods were alkaline, enzyme and steam-heat. After treatment, flax fibres were tested in tension using a universal test machine. Results showed that tensile strength and Young's modulus of flax fibre can be enhanced significantly by the three treatment methods, compared with untreated flax fibres. Enzyme treatment was shown to be the best approach to improve mechanical properties of flax fibre than alkaline and steam-heat treatment.展开更多
Due to the growing need for sustainable and ultra-high-strength construction materials,scientists have created an innovative ultra-high-performance concrete called Geopolymer based ultra-highperformance concrete(GUHPC...Due to the growing need for sustainable and ultra-high-strength construction materials,scientists have created an innovative ultra-high-performance concrete called Geopolymer based ultra-highperformance concrete(GUHPC).Besides,in the last few decades,there have been a lot of explosions and ballistic attacks around the world,which have killed many civilians and fighters in border areas.In this context,this article reviews the fresh state and mechanical properties of GUHPC.Firstly,the ingredients of GUHPC and fresh properties such as setting time and flowability are briefly covered.Secondly,the review of compressive strength,flexure strength,tensile strength and modulus of elasticity of fibrous GUHPC.Thirdly,the blast and projectile impact resistance performance was reviewed.Finally,the microstructural characteristics were reviewed using the scanning electron microscope and X-ray Powder Diffraction.The review outcome reveals that the mechanical properties were increased when 30%silica fume was added to a higher dose of steel fibre to improve the microstructure of GUHPC.It is hypothesized that the brittleness of GUHPC was mitigated by adding 1.5%steel fibre reinforcement,which played a role in the decrease of contact explosion cratering and spalling.Removing the need for cement in GUHPC was a key factor in the review,indicating a promising potential for lowering carbon emissions.However,GUHPC research is still in its early stages,so more study is required before its full potential can be utilized.展开更多
Solid waste recycling is an economically sound strategy for preserving the environment,safeguarding natural resources,and diminishing the reliance on raw material consumption.Geopolymer technology offers a significant...Solid waste recycling is an economically sound strategy for preserving the environment,safeguarding natural resources,and diminishing the reliance on raw material consumption.Geopolymer technology offers a significant advantage by enabling the reuse and recycling of diverse materials.This research assesses how including silica fume and glass powder enhances the impact resistance of ultra-high-performance geopolymer concrete(UHPGC).In total,18 distinct mixtures were formulated by substituting ground granulated blast furnace slag with varying proportions of silica fume and glass powder,ranging from 10%to 40%.Similarly,for each of the mixtures above,steel fibre was added at a dosage of 1.5%to address the inherent brittleness of UHPGC.The mixtures were activated by combining sodium hydroxide and sodium silicate solution to generate geopolymer binders.The specimens were subjected to drop-weight impact testing,wherein an examination was carried out to evaluate various parameters,including flowability,density at fresh and hardened state,compressive strength,impact numbers indicative of cracking and failure occurrences,ductility index,and analysis of failure modes.Additionally,the variations in the impact test outcomes were analyzed using the Weibull distribution,and the findings corresponding to survival probability were offered.Furthermore,the microstructure of UHPGC was scrutinized through scanning electron microscopy.Findings reveal that the specimens incorporating glass powder exhibited lower cracking impact number values than those utilizing silica fume,with reductions ranging from 18.63%to 34.31%.Similarly,failure impact number values decreased from 8.26%to 28.46%across glass powder contents.The maximum compressive and impact strength was recorded in UHPGC,comprising 10%silica fume with fibres.展开更多
This is a very timely review of body armour materials and systems since new test standards are currently being written, or reviewed, and new, innovative products released. Of greatest importance, however, is the recen...This is a very timely review of body armour materials and systems since new test standards are currently being written, or reviewed, and new, innovative products released. Of greatest importance, however, is the recent evolution, and maturity, of the Ultra High Molecular Weight Polyethylene fibres enabling a completely new style of system to evolve e a stackable system of Hard Armour Plates. The science of body armour materials is quickly reviewed with emphasis upon current understanding of relevant energy-absorbing mechanisms in fibres, fabrics, polymeric laminates and ceramics. The trend in ongoing developments in ballistic fibres is then reviewed, analysed and future projections offered. Weaknesses in some of the ceramic grades are highlighted as is the value of using cladding materials to improve the robustness, and multi-strike performance, of Hard Armour Plates. Finally, with the drive for lighter, and therefore smaller, soft armour systems for military personnel the challenges for armour designers are reported, and the importance of the relative size of the Hard Armour Plate to the Soft Armour Insert is strongly emphasised.展开更多
Low velocity impact experiments were carried out on E-glass/epoxy composite laminates having varying thicknesses at sub zero and elevated temperatures using hemi spherical steel impactor of 16 mm diameter with impact ...Low velocity impact experiments were carried out on E-glass/epoxy composite laminates having varying thicknesses at sub zero and elevated temperatures using hemi spherical steel impactor of 16 mm diameter with impact energies in the rage of 50-150 J.The performance of the laminates was assessed in terms of energy absorption,maximum displacement,peak force and failure behaviour.Results indicated that the effect of temperature on energy absorption of the laminate is negligible although the laminates are embrittling at sub zero temperatures.However it has influence on failure behaviour and displacement.Peak force has increased linearly with increase in laminate thickness from 5 to 10 mm.However it got reduced by 25% when temperature was increased from-20℃ to 100℃,Based on experimental results,laminate perforation energies were predicted using curve fitting equations.Statistical analysis was carried out using Taguchi method to identify the global effects of various parameters on laminate performance and confirmed that the laminate thickness has significant influence as compared to temperature,for the studied range.展开更多
This study elaborates on the effects of matrix rigidity on the high-velocity impact behaviour of UHMWPE textile composites using experimental and numerical methods.Textile composite samples were manufactured of a plai...This study elaborates on the effects of matrix rigidity on the high-velocity impact behaviour of UHMWPE textile composites using experimental and numerical methods.Textile composite samples were manufactured of a plain-weave fabric(comprising Spectra?1000 fibres)and four different matrix materials.High-velocity impact tests were conducted by launching a spherical steel projectile to strike on the prepared samples via a gas gun.The experimental results showed that the textile composites gradually changed from a membrane stretching mode to a plate bending mode as the matrix rigidity and thickness increased.The composites deformed in the membrane stretching mode had higher impact resistance and energy absorption capacity,and it was found that the average energy absorption per ply was much higher in this mode,although the number of broken yarns was smaller in the perforated samples.Moreover,the flexible matrix composites always had higher perforation resistance but larger deformation than the rigid matrix counterparts in the tested thickness and velocity range.A novel numerical modelling approach with enhanced computational efficiency was proposed to simulate textile composites in mesoscale resolution.The simulation results revealed that stress and strain development in the more rigid matrix composite was localised in the vicinity of the impact location,leading to larger local deformation and inferior perforation resistance.展开更多
The ballistic performance,and behaviour,of an armour system is governed by two major sets of variables,geometrical and material.Of these,the consistency of performance,especially against small arms ammunition,will dep...The ballistic performance,and behaviour,of an armour system is governed by two major sets of variables,geometrical and material.Of these,the consistency of performance,especially against small arms ammunition,will depend upon the consistency of the properties of the constituent materials.In a body armour system for example,fibre diameter,areal density of woven fabric,and bulk density of ceramic are examples of critical parameters and monitoring such parameters will form the backbone of associated quality control procedures.What is often overlooked,because it can fall into the User’s domain,are the interfaces that exist between the various products;the carrier,the Soft Armour Insert(SAI),and the one or two hard armour plates(HAP1 and HAP2).This is especially true if the various products are sourced from different suppliers.展开更多
基金the financial support from Australian Research Council(ARC)(Grant No.DP220100307).
文摘Polypropylene(PP) fibres have primarily used to control shrinkage cracks or mitigate explosive spalling in concrete structures exposed to fire or subjected to impact/blast loads, with limited investigations on capacity improvement. This study unveils the possibility of using PP micro-fibres to improve the impact behaviour of fibre-reinforced ultra-high-performance concrete(FRUHPC) columns. Results show that the addition of fibres significantly improves the impact behaviour of FRUHPC columns by shifting the failure mechanism from brittle shear to favourable flexural failure. The addition of steel or PP fibres affected the impact responses differently. Steel fibres considerably increased the peak impact force(up to 18%) while PP micro-fibres slightly increased the peak(3%-4%). FRUHPC significantly reduced the maximum midheight displacement by up to 30%(under 20°impact) and substantially improved the displacement recovery by up to 100%(under 20° impact). FRUHPC with steel fibres significantly improved the energy absorption while those with PP micro-fibres reduced the energy absorption, which is different from the effect of PP-macro fibre reported in the literature. The optimal fibre content for micro-PP fibres is 1% due to its minimal fibre usage and low peak and residual displacement. This study highlights the potential of FRUHPC as a promising material for impact-resistant structures by creating a more favourable flexural failure mechanism, enhancing ductility and toughness under impact loading, and advancing the understanding of the role of fibres in structural performance.
基金funded through Cotton Breeding Australia,a Joint Venture between CSIRO and Cotton Seed Distributors(Wee Waa,NSW 2388,Australia)。
文摘Results The population had large variations for lint yield,fibre properties,predicted yarn properties,and composite fibre quality values.Lint yield with all fibre quality traits was not correlated.When the selection was conducted first to keep those with improved fibre quality,and followed for high yields,a large proportion in the resultant populations was the same between selections based on Cottonspec predicted yarn quality and HVI-measured fibre properties.They both exceeded the selection based on FQI and Background The approach of directly testing yarn quality to define fibre quality breeding objectives and progress the selection is attractive but difficult when considering the need for time and labour.The question remains whether yarn prediction tools from textile research can serve as an alternative.In this study,using a dataset from three seasons of field testing recombinant inbred line population,Cottonspec,a software developed by the Commonwealth Scientific and Industrial Research Organisation(CSIRO)for predicting ring spun yarn quality from fibre properties measured by High Volume Instrument(HVI),was used to select improved fibre quality and lint yield in the population.The population was derived from an advanced generation inter-crossing of four CSIRO conventional commercial varieties.The Cottonspec program was able to provide an integrated index of the fibre qualities affecting yarn properties.That was compared with selection based on HVI-measured fibre properties,and two composite fibre quality variables,namely,fibre quality index(FQI),and premium and discount(PD)points.The latter represents the net points of fibre length,strength,and micronaire based on the Premiums and Discounts Schedule used in the market while modified by the inclusion of elongation.PD points.Conclusions The population contained elite segregants with improved yield and fibre properties,and Cottonspec predicted yarn quality is useful to effectively capture these elites.There is a need to further develop yarn quality prediction tools through collaborative efforts with textile mills,to draw better connectedness between fibre and yarn quality.This connection will support the entire cotton value chain research and evolution.
基金Project(50578026) supported by the National Natural Science Foundation of ChinaProject supported by FCT (SFRH/BPD/22680/2005)and Research Center of Mathematics of the University of Minho through the FCT Pluriannual Funding Program
文摘The impact properties of normal concrete (NC) and reinforced concrete (RC) specimens,steel fibre reinforced concrete (SFRC) specimens and RC+SFRC specimens with different steel fibre dosages were investigated with the drop-weight impact test recommended by ACI Committee 544.The results indicate that the number of blows to final failure is greatly increased by addition of steel fibres.Moreover,the combination of steel fibres and steel rebars demonstrates a significant positive composite effect on the impact resistance,which results in the improvement in impact toughness of concrete specimens.In the view of variation of impact test results,the two-parameter Weibull distribution was adopted to analyze the experimental data.It is proved that the probabilistic distributions of the blows to first crack and to final failure of six types of samples approximately follow two-parameter Weibull distribution.
文摘The effect of microwave treatment on the tensile properties of treated sugar palm fibre with 6% NaOH reinforced thermoplastic polyurethane composites was investigated. Firstly, the sugar palm fibres were treated by 6% alkali solution. Then, microwave treatment was used to treat the alkali treated sugar palm fibres. Three types of temperatures(i.e. 70, 80 and 90℃) were applied in microwave treatment. The extruder and hot press machines were used to mixing the sugar palm fibres and polyurethane resin, and fabricate the composites. Tensile properties(i.e. tensile strength, tensile modulus and elongation at break) were studied by following the ASTM D-638 standard. The highest tensile strength was recorded 18.42 MPa with microwave temperature at 70℃ and 6% alkali pre-treatment. Therefore, the temperature 70℃ of microwave treatment may consider the best degree cent grate.
基金supported by ICAR-Central Institute for Cotton Research, Regional Station, Coimbatore, India。
文摘Background Gossypium barbadense L.has specific fibre in terms of its length,strength,and fineness,and known as extra-long staple(ELS) cotton,Sea–Island cotton,or Egyptian cotton.Narrow genetic base with less genetic variability is observed in G.barbadense germplasm.Hence,this study was aimed to evaluate the genetic variability present in 108 germplasm accessions of G.barbadense and to identify the superior genotypes based on the fibre traits.Results We evaluated 108 accessions for five fibre quality traits along with three checks in augmented block design.All fibre traits showed significant differences among genotypes,indicating that there is genetic potential for improvement.Fibre strength and micronaire(MIC) showed high phenotypic and genotypic coefficients of variation.High heritability combined with high genetic advance as percentage of mean(GAM) was recorded for fibre length,strength,and micronaire.Fibre strength and fibre length were significantly correlated with each other,while both showed negative correlation with micronaire.Principal component analysis and Biplot analysis showed that uniformity index discriminated all the genotypes in higher level,while fibre length and strength were medium in discrimination power.Biplot revealed genotypes DB 16,EC959191,GSB 39,ARBB 20,5746U,EA 203,and EA 201 were genetically diverse.Hierarchal cluster analysis based on unweighted paired group method using arithmetic average(UPGMA) grouped the genotypes into four clusters,with each cluster consisting of 4,18,48,and 38 genotypes,respectively.Conclusion Among the genotypes,34 for fibre length(> 35 mm),18 for fibre strength(> 40.4 g·tex^(-1)) and 66 for micronaire(3.7-4.2,A grade) were identified as potential accessions based on their superiority.The superior fibre genotypes identified in this study are potential lines for the ELS cotton breeding program.
文摘The nitrogen(N)requirements of cotton are well understood and have been extensively studied since 1887,with practical guides,decision support systems,models and recent reviews providing information on the importance of providing cotton crops with a sufficient supply of nutrients and improving nitrogen use efficiency.Given that the financial return to the grower depends on both the cotton quantity and quality and the growing importance of the latter,this review focusses specifically on information and knowledge about the effect of nitrogen application level on fibre quality.
基金the Universiti Putra Malaysia for the financial support for this research programme using HiCoE Grant,Ministry of Higher Education,Malaysia
文摘Experimental quasi-static crushing tests were conducted by using a universal testing machine format kenaf-epoxy composite elliptical cones. The work focused on the vertex angle's effects on energy absorption capability; the vertex angles vary from 0° to 24° in 6 increments. The failure modes of the kenaf fibre epoxy composite elliptical cones were observed utilising delegate photos taken during the quasistatic crushing test. Load-deformation curves and deformation histories of typical specimens are presented and discussed. Moreover, the effects of cone vertex angles on the load carrying capacity and the energy absorption capability are also discussed. The results show that the energy absorption abilities significantly influence the ellipticity vertex angle as the load carrying capacity. We concluded that the quasi-static axial crushing behaviour of elliptical mat laminated composite cones is strongly affected by their structural geometry and the specific energy absorbed by the composite elliptical cones with vertex angles of 6°, 12°, 18°, and 24°, which is more than an elliptical cone with the vertex angle of 0°(the elliptical tube) at any given deformation. However, the specific energy absorption for the elliptical composite cone showed a positive correlation, i.e., the more the angle increased, the more energy was absorbed. In this regard, an elliptical composite cone with a 24° angle exhibited the best energy absorption capability.
基金Pettolino FA,Yulia D and Llewellyn DJ were supported by Cotton Breeding Australia and Bacic A by the ARC Centre of Excellence in Plant Cell Walls(CE1101007).The funding bodies had no role in the design of the study and collection,analysis,and interpretation of data or in writing the manuscript.
文摘Background:Cotton seed fibres are long single-celled epidermal trichomes that first appear on the surface of the ovule at anthesis and then elongate rapidly over a period of 15-25 days until a secondary cell wall(SCW)begins to develop through a rapid increase in the deposition of microfibrillar cellulose between the plasma membrane and the primary cell wall that eventually terminates elongation.Quantitative measurements of the different polysaccharide components in both wall types over time and how they influence fibre quality can direct studies involved in enhanc-ing fibre properties for yarn quality through cell wall manipulation or molecular breeding.Results:A detailed chemical analysis of cell wall composition by differential solvent fractionation was used to identify the range of polysaccharides present in mature cotton fibres and used to validate a simpler total cell wall monosaccharide linkage analysis protocol for wall compositional analysis.Analysis of fibres from 5 days post-anthesis through maturity for three cultivated species,Gossypium hirsutum,G.barbadense,and G.arboreum,showed the dynamic nature of cell wall polysaccharide composition through fibre development and that it progressed differently for each species.Plants grown in the glasshouse during either autumn to winter or spring to summer and within each species had fibre qualities and temporal aspects of cell wall development that were different for each season.Notably,the timing of the deposition of the SCW was delayed in winter grown plants and appeared to influence key fibre qual-ity properties.Conclusions:These results suggest that the temporal aspects of cell wall polysaccharide biogenesis during fibre development influence final fibre quality,and this timing is determined by both genetic and environmental factors.The onset of SCW synthesis appears to be a critical factor coinciding with termination of fibre elongation and specify-ing the duration of wall thickening that then affects fibre length and other wall-associated quality parameters that ultimately determine yarn quality.
基金the Agricultural Bioproducts Innovation Program(ABIP)of Agriculture and Agri-food Canada
文摘In recent years there has been interest in using flax fibres to produce composites because of a number of attributes, including low density, biodegradability and high mechanical properties. It was found that treatment of flax fibres may be required to improve the bond quality with a resin. These treatments also have an impact on the properties of the fibres themselves. The objective of this project was to evaluate the impact of three treatment methods on the mechanical properties of flax fibres. The three treatment methods were alkaline, enzyme and steam-heat. After treatment, flax fibres were tested in tension using a universal test machine. Results showed that tensile strength and Young's modulus of flax fibre can be enhanced significantly by the three treatment methods, compared with untreated flax fibres. Enzyme treatment was shown to be the best approach to improve mechanical properties of flax fibre than alkaline and steam-heat treatment.
文摘Due to the growing need for sustainable and ultra-high-strength construction materials,scientists have created an innovative ultra-high-performance concrete called Geopolymer based ultra-highperformance concrete(GUHPC).Besides,in the last few decades,there have been a lot of explosions and ballistic attacks around the world,which have killed many civilians and fighters in border areas.In this context,this article reviews the fresh state and mechanical properties of GUHPC.Firstly,the ingredients of GUHPC and fresh properties such as setting time and flowability are briefly covered.Secondly,the review of compressive strength,flexure strength,tensile strength and modulus of elasticity of fibrous GUHPC.Thirdly,the blast and projectile impact resistance performance was reviewed.Finally,the microstructural characteristics were reviewed using the scanning electron microscope and X-ray Powder Diffraction.The review outcome reveals that the mechanical properties were increased when 30%silica fume was added to a higher dose of steel fibre to improve the microstructure of GUHPC.It is hypothesized that the brittleness of GUHPC was mitigated by adding 1.5%steel fibre reinforcement,which played a role in the decrease of contact explosion cratering and spalling.Removing the need for cement in GUHPC was a key factor in the review,indicating a promising potential for lowering carbon emissions.However,GUHPC research is still in its early stages,so more study is required before its full potential can be utilized.
基金SASTRA Deemed University,India for its generous research support。
文摘Solid waste recycling is an economically sound strategy for preserving the environment,safeguarding natural resources,and diminishing the reliance on raw material consumption.Geopolymer technology offers a significant advantage by enabling the reuse and recycling of diverse materials.This research assesses how including silica fume and glass powder enhances the impact resistance of ultra-high-performance geopolymer concrete(UHPGC).In total,18 distinct mixtures were formulated by substituting ground granulated blast furnace slag with varying proportions of silica fume and glass powder,ranging from 10%to 40%.Similarly,for each of the mixtures above,steel fibre was added at a dosage of 1.5%to address the inherent brittleness of UHPGC.The mixtures were activated by combining sodium hydroxide and sodium silicate solution to generate geopolymer binders.The specimens were subjected to drop-weight impact testing,wherein an examination was carried out to evaluate various parameters,including flowability,density at fresh and hardened state,compressive strength,impact numbers indicative of cracking and failure occurrences,ductility index,and analysis of failure modes.Additionally,the variations in the impact test outcomes were analyzed using the Weibull distribution,and the findings corresponding to survival probability were offered.Furthermore,the microstructure of UHPGC was scrutinized through scanning electron microscopy.Findings reveal that the specimens incorporating glass powder exhibited lower cracking impact number values than those utilizing silica fume,with reductions ranging from 18.63%to 34.31%.Similarly,failure impact number values decreased from 8.26%to 28.46%across glass powder contents.The maximum compressive and impact strength was recorded in UHPGC,comprising 10%silica fume with fibres.
文摘This is a very timely review of body armour materials and systems since new test standards are currently being written, or reviewed, and new, innovative products released. Of greatest importance, however, is the recent evolution, and maturity, of the Ultra High Molecular Weight Polyethylene fibres enabling a completely new style of system to evolve e a stackable system of Hard Armour Plates. The science of body armour materials is quickly reviewed with emphasis upon current understanding of relevant energy-absorbing mechanisms in fibres, fabrics, polymeric laminates and ceramics. The trend in ongoing developments in ballistic fibres is then reviewed, analysed and future projections offered. Weaknesses in some of the ceramic grades are highlighted as is the value of using cladding materials to improve the robustness, and multi-strike performance, of Hard Armour Plates. Finally, with the drive for lighter, and therefore smaller, soft armour systems for military personnel the challenges for armour designers are reported, and the importance of the relative size of the Hard Armour Plate to the Soft Armour Insert is strongly emphasised.
文摘Low velocity impact experiments were carried out on E-glass/epoxy composite laminates having varying thicknesses at sub zero and elevated temperatures using hemi spherical steel impactor of 16 mm diameter with impact energies in the rage of 50-150 J.The performance of the laminates was assessed in terms of energy absorption,maximum displacement,peak force and failure behaviour.Results indicated that the effect of temperature on energy absorption of the laminate is negligible although the laminates are embrittling at sub zero temperatures.However it has influence on failure behaviour and displacement.Peak force has increased linearly with increase in laminate thickness from 5 to 10 mm.However it got reduced by 25% when temperature was increased from-20℃ to 100℃,Based on experimental results,laminate perforation energies were predicted using curve fitting equations.Statistical analysis was carried out using Taguchi method to identify the global effects of various parameters on laminate performance and confirmed that the laminate thickness has significant influence as compared to temperature,for the studied range.
文摘This study elaborates on the effects of matrix rigidity on the high-velocity impact behaviour of UHMWPE textile composites using experimental and numerical methods.Textile composite samples were manufactured of a plain-weave fabric(comprising Spectra?1000 fibres)and four different matrix materials.High-velocity impact tests were conducted by launching a spherical steel projectile to strike on the prepared samples via a gas gun.The experimental results showed that the textile composites gradually changed from a membrane stretching mode to a plate bending mode as the matrix rigidity and thickness increased.The composites deformed in the membrane stretching mode had higher impact resistance and energy absorption capacity,and it was found that the average energy absorption per ply was much higher in this mode,although the number of broken yarns was smaller in the perforated samples.Moreover,the flexible matrix composites always had higher perforation resistance but larger deformation than the rigid matrix counterparts in the tested thickness and velocity range.A novel numerical modelling approach with enhanced computational efficiency was proposed to simulate textile composites in mesoscale resolution.The simulation results revealed that stress and strain development in the more rigid matrix composite was localised in the vicinity of the impact location,leading to larger local deformation and inferior perforation resistance.
文摘The ballistic performance,and behaviour,of an armour system is governed by two major sets of variables,geometrical and material.Of these,the consistency of performance,especially against small arms ammunition,will depend upon the consistency of the properties of the constituent materials.In a body armour system for example,fibre diameter,areal density of woven fabric,and bulk density of ceramic are examples of critical parameters and monitoring such parameters will form the backbone of associated quality control procedures.What is often overlooked,because it can fall into the User’s domain,are the interfaces that exist between the various products;the carrier,the Soft Armour Insert(SAI),and the one or two hard armour plates(HAP1 and HAP2).This is especially true if the various products are sourced from different suppliers.
