The high-carbon ferrochrome is an essential raw material for producing stainless steel,and the demand of it increases with the increase of stainless steel.So increasing Cr recovery rate from chromite is essential for ...The high-carbon ferrochrome is an essential raw material for producing stainless steel,and the demand of it increases with the increase of stainless steel.So increasing Cr recovery rate from chromite is essential for lower costs and higher economic benefits in high-carbon ferrochrome production process.This study calculated the activity of CrO_(x)in slag and investigated the distribution behavior of Cr between slag and alloy.Theω(MgO)/ω(Al_(2)O_(3))was 1.0,and the w(CaO)/w(SiO_(2))was from 0.2 to 0.6 in this study.The calculation and experimental results showed that the main phases of the slag were chrome-containing spinel,magnesium-aluminum spinel,olivine and melilite.The content of spinel in slag decreased with the increasing w(CaO)/w(SiO_(2)),and the w(CrO_(x))in spinel also reduced,but the content of melilite increased.The distribution ratio of Cr between slag and alloy decreased with the increase of slag basicity at 1600℃,meansning that increasing the w(CaO)/w(SiO_(2))of slag can improve the recovery of Cr in chromite smelting process.展开更多
利用浸涂法将Cr_(2)O_(3)涂覆于Al_(2)O_(3)陶瓷表面,通过高温烧结获得涂层陶瓷,并系统性地研究了Cr_(2)O_(3)涂层对样品的物质成分、微观形貌、二次电子发射系数、表面电阻率和真空沿面耐压性能的影响。结果表明:涂层陶瓷表面呈红黑色...利用浸涂法将Cr_(2)O_(3)涂覆于Al_(2)O_(3)陶瓷表面,通过高温烧结获得涂层陶瓷,并系统性地研究了Cr_(2)O_(3)涂层对样品的物质成分、微观形貌、二次电子发射系数、表面电阻率和真空沿面耐压性能的影响。结果表明:涂层陶瓷表面呈红黑色,其为Al_(2)O_(3)-Cr_(2)O_(3)固溶体、Mg Al_(2)O_(4)和Cr_(2)O_(3)三种物质的混合物。相较于Al_(2)O_(3)陶瓷,涂层表面晶粒和孔洞的尺寸均较小,其晶粒尺寸均匀性也有明显提升。高温烧结后,Al、Cr两种元素相互扩散,并且涂层中有少量从陶瓷基体迁移而来的玻璃相。高温烧结的Cr_(2)O_(3)涂层将Al_(2)O_(3)陶瓷的二次电子发射系数减小至3.22,将表面电阻率减小至4.52×10^(11)Ω,将真空沿面耐压强度增大至34.44 k V/cm,此值较Al_(2)O_(3)陶瓷提高了约108%。展开更多
基金Project(2023XQLH055)supported by Central South University Graduate Research Innovation Project(University-Enterprise Joint Project),China。
文摘The high-carbon ferrochrome is an essential raw material for producing stainless steel,and the demand of it increases with the increase of stainless steel.So increasing Cr recovery rate from chromite is essential for lower costs and higher economic benefits in high-carbon ferrochrome production process.This study calculated the activity of CrO_(x)in slag and investigated the distribution behavior of Cr between slag and alloy.Theω(MgO)/ω(Al_(2)O_(3))was 1.0,and the w(CaO)/w(SiO_(2))was from 0.2 to 0.6 in this study.The calculation and experimental results showed that the main phases of the slag were chrome-containing spinel,magnesium-aluminum spinel,olivine and melilite.The content of spinel in slag decreased with the increasing w(CaO)/w(SiO_(2)),and the w(CrO_(x))in spinel also reduced,but the content of melilite increased.The distribution ratio of Cr between slag and alloy decreased with the increase of slag basicity at 1600℃,meansning that increasing the w(CaO)/w(SiO_(2))of slag can improve the recovery of Cr in chromite smelting process.
文摘利用浸涂法将Cr_(2)O_(3)涂覆于Al_(2)O_(3)陶瓷表面,通过高温烧结获得涂层陶瓷,并系统性地研究了Cr_(2)O_(3)涂层对样品的物质成分、微观形貌、二次电子发射系数、表面电阻率和真空沿面耐压性能的影响。结果表明:涂层陶瓷表面呈红黑色,其为Al_(2)O_(3)-Cr_(2)O_(3)固溶体、Mg Al_(2)O_(4)和Cr_(2)O_(3)三种物质的混合物。相较于Al_(2)O_(3)陶瓷,涂层表面晶粒和孔洞的尺寸均较小,其晶粒尺寸均匀性也有明显提升。高温烧结后,Al、Cr两种元素相互扩散,并且涂层中有少量从陶瓷基体迁移而来的玻璃相。高温烧结的Cr_(2)O_(3)涂层将Al_(2)O_(3)陶瓷的二次电子发射系数减小至3.22,将表面电阻率减小至4.52×10^(11)Ω,将真空沿面耐压强度增大至34.44 k V/cm,此值较Al_(2)O_(3)陶瓷提高了约108%。
