以硫脲和氯乙酸为原料,在无溶剂和350 W微波辐射4 m in条件下,缩合生成中间体2,4-噻唑烷二酮(Ⅰ)产率91.5%;随后在无溶剂和400 W微波辐射5 m in条件下,通过V ilsm e ier甲酰化反应,生成中间体4-氯-5-甲酰基噻唑-2(3H)-酮(Ⅱ),产率86.7%...以硫脲和氯乙酸为原料,在无溶剂和350 W微波辐射4 m in条件下,缩合生成中间体2,4-噻唑烷二酮(Ⅰ)产率91.5%;随后在无溶剂和400 W微波辐射5 m in条件下,通过V ilsm e ier甲酰化反应,生成中间体4-氯-5-甲酰基噻唑-2(3H)-酮(Ⅱ),产率86.7%;最后以正丙醇为溶剂,450 W微波辐射7 m in条件下,成环得到5-氨基-噻唑[4,5-d]嘧啶-2(3H)-酮(Ⅲ),产率80.5%。反应总产率为63.9%。合成产物与中间体的结构经1HNMR,MS和元素分析确认。展开更多
DC Resistivity Tomography is a non-linear inversion problem. So far there are mainly two kinds of inversion methods, based on the finite-element method and alpha centers method. In this paper, the disadvantages of the...DC Resistivity Tomography is a non-linear inversion problem. So far there are mainly two kinds of inversion methods, based on the finite-element method and alpha centers method. In this paper, the disadvantages of these two kinds of methods were analysed,and a new method of forward modeling and inversion (Tomography) based on boundary integral equations was proposed. This scheme successfuly overcomes the difficulties of the two formarly methods. It isn’t necessary to use the linearization approximation and calculate the Jacobi matrix. Numerical modeling results given in this paper showed that the computation speed of our method is fast, and there is not any special requirement for initial model, and satisfying results of tomography can be obtained in the case of great contrast of conductivity. So it has wide applications.展开更多
以氨基-1,2,4-三唑和2-偕二硝甲基-5-硝基四唑(HDNMNT)为原料,通过中和反应合成出两种新型含能离子盐——2-偕二硝甲基-5-硝基四唑3-氨基-1,2,4-三唑盐(3-ATDNMNT)和2-偕二硝甲基-5-硝基四唑4-氨基-1,2,4-三唑盐(4-ATDNMNT),收率分别为9...以氨基-1,2,4-三唑和2-偕二硝甲基-5-硝基四唑(HDNMNT)为原料,通过中和反应合成出两种新型含能离子盐——2-偕二硝甲基-5-硝基四唑3-氨基-1,2,4-三唑盐(3-ATDNMNT)和2-偕二硝甲基-5-硝基四唑4-氨基-1,2,4-三唑盐(4-ATDNMNT),收率分别为95.4%和96.7%;利用FT-IR、1 H NMR、13C NMR、15 N NMR及元素分析等方法对其结构进行表征;采用量子化学方法计算了3-ATDNMNT和4-ATDNMNT的爆轰性能;在标准状态下(膨胀比为70∶1),利用最小自由能原理,分别计算了两种离子盐在丁羟复合推进剂中的能量性能。结果表明,3-ATDNMNT的爆速和爆压分别为8.587km/s和33.58GPa,4-ATDNMNT的爆速和爆压分别为8.693km/s和34.31GPa。以3-ATDNMNT部分取代丁羟复合推进剂中的AP后,丁羟复合推进剂的理论比冲可达2 635.7N·s/kg。以4-ATDNMNT部分取代丁羟复合推进剂中的AP后,当HTPB、Al、AP及4-ATDNMNT各组分质量分数分别为10%、5%、15%及70%时,获得该丁羟复合推进剂的最高理论比冲为2 677.2N·s/kg。展开更多
文摘以硫脲和氯乙酸为原料,在无溶剂和350 W微波辐射4 m in条件下,缩合生成中间体2,4-噻唑烷二酮(Ⅰ)产率91.5%;随后在无溶剂和400 W微波辐射5 m in条件下,通过V ilsm e ier甲酰化反应,生成中间体4-氯-5-甲酰基噻唑-2(3H)-酮(Ⅱ),产率86.7%;最后以正丙醇为溶剂,450 W微波辐射7 m in条件下,成环得到5-氨基-噻唑[4,5-d]嘧啶-2(3H)-酮(Ⅲ),产率80.5%。反应总产率为63.9%。合成产物与中间体的结构经1HNMR,MS和元素分析确认。
文摘DC Resistivity Tomography is a non-linear inversion problem. So far there are mainly two kinds of inversion methods, based on the finite-element method and alpha centers method. In this paper, the disadvantages of these two kinds of methods were analysed,and a new method of forward modeling and inversion (Tomography) based on boundary integral equations was proposed. This scheme successfuly overcomes the difficulties of the two formarly methods. It isn’t necessary to use the linearization approximation and calculate the Jacobi matrix. Numerical modeling results given in this paper showed that the computation speed of our method is fast, and there is not any special requirement for initial model, and satisfying results of tomography can be obtained in the case of great contrast of conductivity. So it has wide applications.
文摘以氨基-1,2,4-三唑和2-偕二硝甲基-5-硝基四唑(HDNMNT)为原料,通过中和反应合成出两种新型含能离子盐——2-偕二硝甲基-5-硝基四唑3-氨基-1,2,4-三唑盐(3-ATDNMNT)和2-偕二硝甲基-5-硝基四唑4-氨基-1,2,4-三唑盐(4-ATDNMNT),收率分别为95.4%和96.7%;利用FT-IR、1 H NMR、13C NMR、15 N NMR及元素分析等方法对其结构进行表征;采用量子化学方法计算了3-ATDNMNT和4-ATDNMNT的爆轰性能;在标准状态下(膨胀比为70∶1),利用最小自由能原理,分别计算了两种离子盐在丁羟复合推进剂中的能量性能。结果表明,3-ATDNMNT的爆速和爆压分别为8.587km/s和33.58GPa,4-ATDNMNT的爆速和爆压分别为8.693km/s和34.31GPa。以3-ATDNMNT部分取代丁羟复合推进剂中的AP后,丁羟复合推进剂的理论比冲可达2 635.7N·s/kg。以4-ATDNMNT部分取代丁羟复合推进剂中的AP后,当HTPB、Al、AP及4-ATDNMNT各组分质量分数分别为10%、5%、15%及70%时,获得该丁羟复合推进剂的最高理论比冲为2 677.2N·s/kg。
