用电子束引发预辐照接枝的方法,在高密度聚乙烯(High density polyethylene,HDPE)薄膜上接枝甲基丙烯酸缩水甘油酯(Glycidyl methacrylate,GMA),制备了含有高活性环氧基团的聚合物膜。详细研究了单体浓度、反应温度和时间以及吸收剂量...用电子束引发预辐照接枝的方法,在高密度聚乙烯(High density polyethylene,HDPE)薄膜上接枝甲基丙烯酸缩水甘油酯(Glycidyl methacrylate,GMA),制备了含有高活性环氧基团的聚合物膜。详细研究了单体浓度、反应温度和时间以及吸收剂量等因素对接枝率的影响规律。应用傅立叶变换红外光谱(FT–IR)、差示扫描量热仪(DSC)、原子力显微镜(AFM)研究了接枝物的组成、热性能和表面形貌。FT–IR测试表明接枝物为HDPE–g–GMA共聚物;接枝膜的熔融温度Tm以及修正后HDPE组分ΔHf(HDPE)均随着接枝率的增大而降低,原因归结于HDPE接枝后结晶度降低。HDPE–g–GMA膜的AFM图像显示其表面粗糙度增加,进一步证明膜表面发生了接枝反应。展开更多
Atom transfer radical polymerization (ATRP) of glycidyl methacrylate (GMA) at roomtemperature was carried out in a methylethyl ketone/1-propanol (in 7/3 volume ratio) solution,initiated and catalyzed by ethyl 2-bromop...Atom transfer radical polymerization (ATRP) of glycidyl methacrylate (GMA) at roomtemperature was carried out in a methylethyl ketone/1-propanol (in 7/3 volume ratio) solution,initiated and catalyzed by ethyl 2-bromopropionate (BRA)/CuC1/2,2＇ -bipyridine (BPY). Polymer ofGMA with planned molecular weight and narrow molecular weight distribution was obtained. In caseof bulk polymerization with the same initiator and catalyst the molecular weight of the polymerobtained was 1.5～2. 1 times greater than that of the above one. By using 1-phenylethyl chloride(PECl)/CuCl/BPY as catalyst controlled ATRP of GMA has failed whether it was in bulk or insolution.展开更多
文摘用电子束引发预辐照接枝的方法,在高密度聚乙烯(High density polyethylene,HDPE)薄膜上接枝甲基丙烯酸缩水甘油酯(Glycidyl methacrylate,GMA),制备了含有高活性环氧基团的聚合物膜。详细研究了单体浓度、反应温度和时间以及吸收剂量等因素对接枝率的影响规律。应用傅立叶变换红外光谱(FT–IR)、差示扫描量热仪(DSC)、原子力显微镜(AFM)研究了接枝物的组成、热性能和表面形貌。FT–IR测试表明接枝物为HDPE–g–GMA共聚物;接枝膜的熔融温度Tm以及修正后HDPE组分ΔHf(HDPE)均随着接枝率的增大而降低,原因归结于HDPE接枝后结晶度降低。HDPE–g–GMA膜的AFM图像显示其表面粗糙度增加,进一步证明膜表面发生了接枝反应。
文摘Atom transfer radical polymerization (ATRP) of glycidyl methacrylate (GMA) at roomtemperature was carried out in a methylethyl ketone/1-propanol (in 7/3 volume ratio) solution,initiated and catalyzed by ethyl 2-bromopropionate (BRA)/CuC1/2,2＇ -bipyridine (BPY). Polymer ofGMA with planned molecular weight and narrow molecular weight distribution was obtained. In caseof bulk polymerization with the same initiator and catalyst the molecular weight of the polymerobtained was 1.5～2. 1 times greater than that of the above one. By using 1-phenylethyl chloride(PECl)/CuCl/BPY as catalyst controlled ATRP of GMA has failed whether it was in bulk or insolution.
