Pitch produced by the lique-faction of coal was divided into two frac-tions:soluble in toluene(TS)and insol-uble in toluene but soluble in pyridine(TI-PS),and their differences in molecu-lar structure and oxidation ac...Pitch produced by the lique-faction of coal was divided into two frac-tions:soluble in toluene(TS)and insol-uble in toluene but soluble in pyridine(TI-PS),and their differences in molecu-lar structure and oxidation activity were studied.Several different carbon materi-als were produced from them by oxida-tion in air(350℃,300 mL/min)fol-lowed by carbonization(1000℃ in Ar),and the effect of the cross-linked structure on their structure and sodium storage properties was investigated.The results showed that the two pitch fractions were obviously different after the air oxidation.The TS fraction with a low degree of condensation and abundant side chains had a stronger oxidation activity and thus introduced more cross-linked oxygen-containing functional groups C(O)―O which prevented carbon layer rearrangement during the carbonization.As a result,a disordered hard carbon with more defects was formed,which improved the electrochemical performance.Therefore,the carbon materials derived from TS(O-TS-1000)had an obvious disordered structure and a larger layer spacing,giving them better sodium storage perform-ance than those derived from the TI-PS fraction(O-TI-PS-1000).The specific capacity of O-TS-1000 was about 250 mAh/g at 20 mA/g,which was 1.67 times higher than that of O-TI-PS-1000(150 mAh/g).展开更多
We report five coordination polymers(CPs)based on fluorescent ligands[1,6-di(1H-imidazol-1-yl)pyrene(dip),9,10-di(1H-imidazol-1-yl)anthracene(dia)]and anionic ligands[cyclohexane-1,4-dicarboxylic acid(H_(2)cda),campho...We report five coordination polymers(CPs)based on fluorescent ligands[1,6-di(1H-imidazol-1-yl)pyrene(dip),9,10-di(1H-imidazol-1-yl)anthracene(dia)]and anionic ligands[cyclohexane-1,4-dicarboxylic acid(H_(2)cda),camphoric acid(H_(2)cpa)].In[Cd(dip)(cda)]·4H_(2)O}_(n)(1),the Cd^(2+)ions,acting as tetrahedral nodes,are linked by dipand cda^(2-)ligands with four Cd^(2+)ions into five-fold interpenetrating network array of topology of dia.In{[Cd(dip)(cpa)]·4H_(2)O}_(n)(2),the Cd^(2+)ions,acting as a 4-connector,are linked by cpa^(2-)and dip ligands into a 3D framework ofcds topology.In{[Ni(dia)_(2)Cl_(2)]·DMF}_(n)(3),the Ni^(2+)ion is linked by four dia ligands into a layer structure,and 1Dchannels of a cross-section of 1.35 nm×0.96 nm are formed.In{[Cd(dia)_(2)(H_(2)O)_(2)](NO_(3))_(2)·2DMSO}n(4),the dia ligandsconnected Cd^(2+)ions into a 2D layer,and 1D channels are formed between adjacent layers with a cross-section of0.87 nm×0.43 nm.In[Zn(dip)Cl_(2)]_(n)(5),the Zn^(2+)ion is linked by dip ligands into an infinite 1D chain.The infrared,thermal gravimetric,and fluorescent emission data were collected and analyzed for these coordination polymers.CCDC:2356055,1;2440075,2;2356057,3;2356057,4;2356059,5.展开更多
Six coordination polymers based on 9,10-di(pyridine-4-yl)-anthracene(DPA)and 1,6-di(1H-imidazol-1-yl)pyrene(DIP)were obtained by solvothermal reactions.{[Zn(DPA)Cl_(2)]·DMF·2H_(2)O}n(1)and{[Zn_(1.5)(DPA)_(1....Six coordination polymers based on 9,10-di(pyridine-4-yl)-anthracene(DPA)and 1,6-di(1H-imidazol-1-yl)pyrene(DIP)were obtained by solvothermal reactions.{[Zn(DPA)Cl_(2)]·DMF·2H_(2)O}n(1)and{[Zn_(1.5)(DPA)_(1.5)Cl_(3)]·5H_(2)O}n(2)are framework isomers,which both contain zigzag chains formed by DPA,Zn^(2+),and Cl-.The zigzag chains in 1 are further assembled by C—H…Cl interactions into layers,and these layers exhibit two different orientations,displaying a rare 2D to 3D interpenetration mode.The zigzag chains in 2 are parallelly arranged.{[Zn_(3)(DPA)_(3)Br_(6)]·2DMF·_(1.5)H_(2)O}n(3)is isostructural to 2.3 was obtained using ZnBr_(2)instead of ZnCl_(2).[M(DPA)(formate)_(2)(H_(2)O)_(2)]n[M=Co(4),Cu(5)]are isostructural,contain chain structures formed by DPA,Cu^(2+)/Co^(2+),and for-mate ions,which were formed in situ in the solvothermal reaction.{[Zn(DIP)_(2)Cl]ClO_(4)}n(6)contains a layer structure formed by DIP and Zn^(2+).Free DPA and DIP ligands exhibited high fluorescence at room temperature,and coordina-tion polymers 3 and 6 displayed enhanced fluorescent emissions.展开更多
Changes to the microstructure of a hard carbon(HC)and its solid electrolyte interface(SEI)can be effective in improving the electrode kinetics.However,achieving fast charging using a simple and inexpensive strategy wi...Changes to the microstructure of a hard carbon(HC)and its solid electrolyte interface(SEI)can be effective in improving the electrode kinetics.However,achieving fast charging using a simple and inexpensive strategy without sacrificing its initial Coulombic efficiency remains a challenge in sodium ion batteries.A simple liquid-phase coating approach has been used to generate a pitch-derived soft carbon layer on the HC surface,and its effect on the porosity of HC and SEI chemistry has been studied.A variety of structural characterizations show a soft carbon coating can increase the defect and ultra-micropore contents.The increase in ultra-micropore comes from both the soft carbon coatings and the larger pores within the HC that are partially filled by pitch,which provides more Na+storage sites.In-situ FTIR/EIS and ex-situ XPS showed that the soft carbon coating induced the formation of thinner SEI that is richer in NaF from the electrolyte,which stabilized the interface and promoted the charge transfer process.As a result,the anode produced fastcharging(329.8 mAh g^(−1)at 30 mA g^(−1)and 198.6 mAh g^(−1)at 300 mA g^(−1))and had a better cycling performance(a high capacity retention of 81.4%after 100 cycles at 150 mA g^(−1)).This work reveals the critical role of coating layer in changing the pore structure,SEI chemistry and diffusion kinetics of hard carbon,which enables rational design of sodium-ion battery anode with enhanced fast charging capability.展开更多
Tin phosphide(Sn_(x)P_(y))is an anode for sodium-ion batteries resulting from its exceptionally high theoretical capacity in future.Nevertheless,its application will be hindered by significant volume expansion during ...Tin phosphide(Sn_(x)P_(y))is an anode for sodium-ion batteries resulting from its exceptionally high theoretical capacity in future.Nevertheless,its application will be hindered by significant volume expansion during charge discharge cycles and poor electrical conductivity.This study employs a Sn-based metal-organic framework(Sn-MOF)as a precursor for synthesizing tin phosphide nanoparticles.Then Solidago Canadensis L.,commonly known as Canadian Goldenrod,is utilized as a biomass carbon carrier to form a composite with tin phosphide nanoparticles.The biomass derived porous carbon provides additional sodium ion storage sites and serves as a structural scaffold that constrains the volumetric expansion of tin phosphide,thereby enhancing the material’s stability.The fabricated composite exhibits superior electrode electrochemical performance for sodium-ion batteries.It retains a high capacity(489.5 mA·h/g)after 100 cycles at 0.2 A/g.Even after 500 cycles at a high current density of 2 A/g,it still maintains a stable reversible capacity.This study offers a comprehensive exploration of innovative design strategies essential for the development of novel anode materials,paving the way for more sustainable and efficient sodium-ion-based energy storage systems.展开更多
This study presents the synthesis of three dinuclear cobalt complexes based on three imine derivatives:bis-[4-(2-pyridylmethyleneamino)-phenyl]thioether(L1),bis-[4-(2-pyridylmethyleneamino)-phenyl]ether(L2),and bis-[4...This study presents the synthesis of three dinuclear cobalt complexes based on three imine derivatives:bis-[4-(2-pyridylmethyleneamino)-phenyl]thioether(L1),bis-[4-(2-pyridylmethyleneamino)-phenyl]ether(L2),and bis-[4-(2-pyridylmethyleneamino)-phenyl]methane(L3).Single-crystal X-ray diffraction analysis reveals that the complexes[Co_(2)(L1)3](ClO_(4))4·2CH_(3)CN(1),[Co_(2)(L2)3](ClO_(4))4·2CH_(3)OH(2),and[Co_(2)(L3)3](ClO_(4))4·2CH_(3)OH(3)all exhibit a dinuclear structure.Magnetic test results show that complex 3 exhibited irreversible SCO behavior induced by loss of solvent at 300 K,with the average Co-N bond length increasing from 0.2139(3)to 0.2153(3)nm.Meanwhile,the desolvated complex 3 exhibited paramagnetic behavior similar to that of complexes 1 and 2.Variable-temperature UV-Vis spectroscopic studies also indicate that complex 3 undergoes a solvent-loss-induced spin-state transition.CCDC:2347354,1(120 K);2347355,2(120 K);2347356,3(120 K);2347357,3(400 K).展开更多
The capacitive performance of carbon materials as supercapacitor electrode is synergistically influenced by the surface porous structure,graphitization structure,and surface atomic doping.However,simple realization of...The capacitive performance of carbon materials as supercapacitor electrode is synergistically influenced by the surface porous structure,graphitization structure,and surface atomic doping.However,simple realization of their synergistic regulation still faces significant challenges.Based on the biological porous structure,heteroatom-rich content and low cost of chestnut,this work adopt chestnut as precursor to prepare carbon electrode,of which the pores,graphitization,and surface atomic doping are synergistically regulated by simply changing the activation temperature.The optimized carbon electrode possesses a hierarchical porous structure with partial graphitization and O and N co doping.Benefited from these merits,the chestnut-derived porous carbon as a supercapacitor electrode,can achieve a high specific capacitance of 328.6 F/g at 1 A/g,which still retains 80.8%when the current density enlarging to 20 A/g.By packaging the symmetric electric double-layer capacitor,the device exhibits a specific capacitance of 63.6 F/g at 1 A/g,delivering an energy density of 12.7 W·h/kg at a power density of 600 W/kg.The stability of the device is tested at a current density of 20 A/g,which shows a capacitance retention rate of up to 90%after 10000 charge-discharge cycles.展开更多
Microbial community diversities in the drainage from three mines(Dexing Copper Mine,Qibaoshan Copper Mine and Yaogangxian Tungsten Mine,China)were analyzed using 16S rDNA PCR-RFLP approach.The efficiencies of chalcopy...Microbial community diversities in the drainage from three mines(Dexing Copper Mine,Qibaoshan Copper Mine and Yaogangxian Tungsten Mine,China)were analyzed using 16S rDNA PCR-RFLP approach.The efficiencies of chalcopyrite bioleaching were compared using enrichment of the three cultures.Phylogenetic analysis indicates that the dominant microorganisms are clustered with the Proteobacteria,the remaining is affiliated with Nitrospira,Acidobacteria and Actinobacteria.At the genus level,Acidithiobacillus is the dominant group in both YTW and QBS samples,while Spingomonas is dominant in YGX sample.Moreover,the principal component analysis(PCA)reveals that QBS and YTW have similar geochemical character and microbial communities.The results also show that pH value and tungsten concentration play a key role in microbial community distribution and relative abundance.The bioleaching efficiency of the enrichment cultures from YTW and QBS is similar.After 15 d,the bioleaching rates of low grade chalcopyrite(0.99%)are both up to 99.5% when using 10 g/L pulp density due to the similar microbial composition of YTW and QBS.Moreover,the leaching efficiencies of enrichment cultures containing multiple bioleaching microorganisms are higher than that of pure culture Acidithiobacillus ferrooxidans.展开更多
An intermediate compound 2, 4-bis（laurylamino）-6-（1-（2-aminoethyl）-piperazine）-1, 3, 5-triazine was prepared by stepwise nucleophilic substitution on triazine ring by lauryl amine and subsequently 1-（2-aminoet...An intermediate compound 2, 4-bis（laurylamino）-6-（1-（2-aminoethyl）-piperazine）-1, 3, 5-triazine was prepared by stepwise nucleophilic substitution on triazine ring by lauryl amine and subsequently 1-（2-aminoethyl）-piperazine. Then imidization of perylene-3, 4, 9, 10-tetracarboxylic acid dianhydride with 2,4-bis（laurylamino）-6-（1-（2-aminoethyl）-piperazine）-1, 3, 5-triazine was carried out to afford a novel perylene derivative bearing two melamine blocks （S2） and 1, 6, 7, 12-tetra（4-tert-butyl phenoxy）-perylene-3, 4, 9, 10-tetracarboxylic acid bisimide （S1. The hydrogen-bonding interactions between S1 and S2 were investigated by IH NMR spectrum, UV/Vis spectrum and fluorescence spectrum. The influences on the morphologies of S1·S2 aggregates were investigated. The results show that well-defined nanofibers with a diameter of about 100 nm can be obtained by self-assembly between S1 and S2 only in CH2Cl2 solution. Based on these results, guidelines for the molecular design and self-assembly of supramolecular polymer materials are presented.展开更多
An iridium （Ⅲ） bis[（4,6-difluorophenyl）pyridinato-N, C^2][6-（6＇-（4＂-（ 5＂-phenyl- 1＂, 3＂, 4＂-oxadiazole-2＂-yl） phenoxy） hexyloxy picolinate） was synthesized and characterized by IH NMR and elementary ...An iridium （Ⅲ） bis[（4,6-difluorophenyl）pyridinato-N, C^2][6-（6＇-（4＂-（ 5＂-phenyl- 1＂, 3＂, 4＂-oxadiazole-2＂-yl） phenoxy） hexyloxy picolinate） was synthesized and characterized by IH NMR and elementary analysis in order to study the effect of ancillary ligand of the oxadiazole-based picolinic acid derivative on optophysical properties of its iridium complex, and further to obtain an iridium complex with highly-efficient blue emission. The thermal stability, UV absorption and photoluminescent properties of this iridium complex were investigated. Compared with iridium （Ⅲ） bis[（4,6-difluorophenyl）pyridinato-N, C^2]（picolinate） reported as a highly-efficient blue electroluminescent material, this iridium complex bearing an oxadiazole-based picolinic acid derivative presents higher thermal stability, more intense UV absorption at 291 nm and similar photoluminescent spectrum peaked at 469 nm. This indicates that tuning ancillary ligand of picolinic acid with an oxadiazole unit can improve the optophysical properties of its iridium complex.展开更多
Three new ferrocene （Fc） based receptors with pyridyl moiety, named methyl-6- ferrocenoylacetyl-2-pyridine carboxylate （FcLl）, 1,1＇-（2,6-bispyridyl）bis-3-ferrocenyl-l,3-propanedione （FcL2）, ferrocenecarboxald...Three new ferrocene （Fc） based receptors with pyridyl moiety, named methyl-6- ferrocenoylacetyl-2-pyridine carboxylate （FcLl）, 1,1＇-（2,6-bispyridyl）bis-3-ferrocenyl-l,3-propanedione （FcL2）, ferrocenecarboxaldehyde-2,6-dipicolinoyhydrazone （FcL3） were synthesized, and further characterized by elemental analysis, IR spectra, UV-Vis spectra, 1H and 13C NMR. The electrochemical properties and ion sensing properties of FcL1, FcL2 and FcL3 were also investigated by means of cyclic voltammetry in ethanol solution with 0.1 mol/L LiC104 as the supporting electrolyte. The E~ values of the receptors increase with the scanning rate increasing at high scanning rate, and Ipa/Ipo approaches unity, indicating that the redox reaction is basically reversible. Their recognition performances to different metal cations such as Cd（II）, Co（II）, Cu（II）, Hg（II）, Mn（II）, Ni（II）, Zn（II） show that the FcL1 is responsive to Cu（II） with the maximum electrochemical shift of the FcL1 for Cu（II）of about 72.0 mV, whereas the FcL2 is responsive to Cu（II） and Mn（II） with shift of 102 mV and 109 mV, respectively, and the FcL3 is responsive to Hg（II） and Mn（II） with the shift of 53.0 mV and 54.0 mV, respectively. All the results show that these receptors may have potential applications in electrochemical sensor technology, material science, and molecular devices.展开更多
The quantitative structure-activity relationship(QSAR) of 2-alkyl-4-(biphenylylmethoxy) pyridine derivatives was studied.Three different alignment methods were used to get the models of the comparative molecular field...The quantitative structure-activity relationship(QSAR) of 2-alkyl-4-(biphenylylmethoxy) pyridine derivatives was studied.Three different alignment methods were used to get the models of the comparative molecular field analysis(CoMFA),the comparative molecular similarity indices analysis(CoMSIA),and the hologram quantitative structure?activity relationship(HQSAR).The statistical results from the established models show believable predictivity based on the cross-validated value(q2>0.5) and the non-validated value(r2>0.9),The analysis on contour maps of CoMFA and CoMSIA models suggests that hydrophobic and hydrogen-bond acceptor fields are important factors that affect the AT1 antagonistic activity of 2-alkyl-4-(biphenylylmethoxy) pyridine derivatives besides the steric and electrostatic fields,The structural modification information from different atom contributions in the HQSAR model is in agreement with that in the 3D-QSAR models.展开更多
Zn2GeO4 nanorods were prepared by a surfactant-assisted solution phase route.The as-prepared products were characterized by X-ray powder diffraction(XRD),scanning electron microscopy(SEM),high-resolution transmission ...Zn2GeO4 nanorods were prepared by a surfactant-assisted solution phase route.The as-prepared products were characterized by X-ray powder diffraction(XRD),scanning electron microscopy(SEM),high-resolution transmission electron microscopy(HRTEM),inductively coupled plasma atomic emission spectrometer(ICP-AES),UV-vis diffuse reflection spectroscopy and photoluminescence(PL) spectroscopy.The possible formation mechanism of Zn2GeO4 nanorods was discussed.It was supposed that the CTA+ cations preferentially adsorb on the planes of Zn2GeO4 nanorods,leading to preferential growth along the c-axis to form the Zn2GeO4 rods with larger aspect ratio and higher surface area,which showed the improved photocatalytic activity for photoreduction of CO2.The photoluminescence(PL) property of Zn2GeO4 nanorods was investigated through the emission spectra.展开更多
文摘Pitch produced by the lique-faction of coal was divided into two frac-tions:soluble in toluene(TS)and insol-uble in toluene but soluble in pyridine(TI-PS),and their differences in molecu-lar structure and oxidation activity were studied.Several different carbon materi-als were produced from them by oxida-tion in air(350℃,300 mL/min)fol-lowed by carbonization(1000℃ in Ar),and the effect of the cross-linked structure on their structure and sodium storage properties was investigated.The results showed that the two pitch fractions were obviously different after the air oxidation.The TS fraction with a low degree of condensation and abundant side chains had a stronger oxidation activity and thus introduced more cross-linked oxygen-containing functional groups C(O)―O which prevented carbon layer rearrangement during the carbonization.As a result,a disordered hard carbon with more defects was formed,which improved the electrochemical performance.Therefore,the carbon materials derived from TS(O-TS-1000)had an obvious disordered structure and a larger layer spacing,giving them better sodium storage perform-ance than those derived from the TI-PS fraction(O-TI-PS-1000).The specific capacity of O-TS-1000 was about 250 mAh/g at 20 mA/g,which was 1.67 times higher than that of O-TI-PS-1000(150 mAh/g).
文摘We report five coordination polymers(CPs)based on fluorescent ligands[1,6-di(1H-imidazol-1-yl)pyrene(dip),9,10-di(1H-imidazol-1-yl)anthracene(dia)]and anionic ligands[cyclohexane-1,4-dicarboxylic acid(H_(2)cda),camphoric acid(H_(2)cpa)].In[Cd(dip)(cda)]·4H_(2)O}_(n)(1),the Cd^(2+)ions,acting as tetrahedral nodes,are linked by dipand cda^(2-)ligands with four Cd^(2+)ions into five-fold interpenetrating network array of topology of dia.In{[Cd(dip)(cpa)]·4H_(2)O}_(n)(2),the Cd^(2+)ions,acting as a 4-connector,are linked by cpa^(2-)and dip ligands into a 3D framework ofcds topology.In{[Ni(dia)_(2)Cl_(2)]·DMF}_(n)(3),the Ni^(2+)ion is linked by four dia ligands into a layer structure,and 1Dchannels of a cross-section of 1.35 nm×0.96 nm are formed.In{[Cd(dia)_(2)(H_(2)O)_(2)](NO_(3))_(2)·2DMSO}n(4),the dia ligandsconnected Cd^(2+)ions into a 2D layer,and 1D channels are formed between adjacent layers with a cross-section of0.87 nm×0.43 nm.In[Zn(dip)Cl_(2)]_(n)(5),the Zn^(2+)ion is linked by dip ligands into an infinite 1D chain.The infrared,thermal gravimetric,and fluorescent emission data were collected and analyzed for these coordination polymers.CCDC:2356055,1;2440075,2;2356057,3;2356057,4;2356059,5.
文摘Six coordination polymers based on 9,10-di(pyridine-4-yl)-anthracene(DPA)and 1,6-di(1H-imidazol-1-yl)pyrene(DIP)were obtained by solvothermal reactions.{[Zn(DPA)Cl_(2)]·DMF·2H_(2)O}n(1)and{[Zn_(1.5)(DPA)_(1.5)Cl_(3)]·5H_(2)O}n(2)are framework isomers,which both contain zigzag chains formed by DPA,Zn^(2+),and Cl-.The zigzag chains in 1 are further assembled by C—H…Cl interactions into layers,and these layers exhibit two different orientations,displaying a rare 2D to 3D interpenetration mode.The zigzag chains in 2 are parallelly arranged.{[Zn_(3)(DPA)_(3)Br_(6)]·2DMF·_(1.5)H_(2)O}n(3)is isostructural to 2.3 was obtained using ZnBr_(2)instead of ZnCl_(2).[M(DPA)(formate)_(2)(H_(2)O)_(2)]n[M=Co(4),Cu(5)]are isostructural,contain chain structures formed by DPA,Cu^(2+)/Co^(2+),and for-mate ions,which were formed in situ in the solvothermal reaction.{[Zn(DIP)_(2)Cl]ClO_(4)}n(6)contains a layer structure formed by DIP and Zn^(2+).Free DPA and DIP ligands exhibited high fluorescence at room temperature,and coordina-tion polymers 3 and 6 displayed enhanced fluorescent emissions.
基金National Key Research and Development Program of China(2022YFE0206300)National Natural Science Foundation of China(U21A2081,22075074,22209047)+2 种基金Guangdong Basic and Applied Basic Research Foundation(2024A1515011620)Hunan Provincial Natural Science Foundation of China(2024JJ5068)Foundation of Yuelushan Center for Industrial Innovation(2023YCII0119)。
文摘Changes to the microstructure of a hard carbon(HC)and its solid electrolyte interface(SEI)can be effective in improving the electrode kinetics.However,achieving fast charging using a simple and inexpensive strategy without sacrificing its initial Coulombic efficiency remains a challenge in sodium ion batteries.A simple liquid-phase coating approach has been used to generate a pitch-derived soft carbon layer on the HC surface,and its effect on the porosity of HC and SEI chemistry has been studied.A variety of structural characterizations show a soft carbon coating can increase the defect and ultra-micropore contents.The increase in ultra-micropore comes from both the soft carbon coatings and the larger pores within the HC that are partially filled by pitch,which provides more Na+storage sites.In-situ FTIR/EIS and ex-situ XPS showed that the soft carbon coating induced the formation of thinner SEI that is richer in NaF from the electrolyte,which stabilized the interface and promoted the charge transfer process.As a result,the anode produced fastcharging(329.8 mAh g^(−1)at 30 mA g^(−1)and 198.6 mAh g^(−1)at 300 mA g^(−1))and had a better cycling performance(a high capacity retention of 81.4%after 100 cycles at 150 mA g^(−1)).This work reveals the critical role of coating layer in changing the pore structure,SEI chemistry and diffusion kinetics of hard carbon,which enables rational design of sodium-ion battery anode with enhanced fast charging capability.
文摘Tin phosphide(Sn_(x)P_(y))is an anode for sodium-ion batteries resulting from its exceptionally high theoretical capacity in future.Nevertheless,its application will be hindered by significant volume expansion during charge discharge cycles and poor electrical conductivity.This study employs a Sn-based metal-organic framework(Sn-MOF)as a precursor for synthesizing tin phosphide nanoparticles.Then Solidago Canadensis L.,commonly known as Canadian Goldenrod,is utilized as a biomass carbon carrier to form a composite with tin phosphide nanoparticles.The biomass derived porous carbon provides additional sodium ion storage sites and serves as a structural scaffold that constrains the volumetric expansion of tin phosphide,thereby enhancing the material’s stability.The fabricated composite exhibits superior electrode electrochemical performance for sodium-ion batteries.It retains a high capacity(489.5 mA·h/g)after 100 cycles at 0.2 A/g.Even after 500 cycles at a high current density of 2 A/g,it still maintains a stable reversible capacity.This study offers a comprehensive exploration of innovative design strategies essential for the development of novel anode materials,paving the way for more sustainable and efficient sodium-ion-based energy storage systems.
文摘This study presents the synthesis of three dinuclear cobalt complexes based on three imine derivatives:bis-[4-(2-pyridylmethyleneamino)-phenyl]thioether(L1),bis-[4-(2-pyridylmethyleneamino)-phenyl]ether(L2),and bis-[4-(2-pyridylmethyleneamino)-phenyl]methane(L3).Single-crystal X-ray diffraction analysis reveals that the complexes[Co_(2)(L1)3](ClO_(4))4·2CH_(3)CN(1),[Co_(2)(L2)3](ClO_(4))4·2CH_(3)OH(2),and[Co_(2)(L3)3](ClO_(4))4·2CH_(3)OH(3)all exhibit a dinuclear structure.Magnetic test results show that complex 3 exhibited irreversible SCO behavior induced by loss of solvent at 300 K,with the average Co-N bond length increasing from 0.2139(3)to 0.2153(3)nm.Meanwhile,the desolvated complex 3 exhibited paramagnetic behavior similar to that of complexes 1 and 2.Variable-temperature UV-Vis spectroscopic studies also indicate that complex 3 undergoes a solvent-loss-induced spin-state transition.CCDC:2347354,1(120 K);2347355,2(120 K);2347356,3(120 K);2347357,3(400 K).
基金Project(2023JJ40040)supported by the Natural Science Foundation of Hunan Province,ChinaProject(502221904)supported by the Project of Innovation-Driven Plan in Central South University,ChinaProject(24C0140)supported by the Scientific Research Fund of Hunan Provincial Education Department,China。
文摘The capacitive performance of carbon materials as supercapacitor electrode is synergistically influenced by the surface porous structure,graphitization structure,and surface atomic doping.However,simple realization of their synergistic regulation still faces significant challenges.Based on the biological porous structure,heteroatom-rich content and low cost of chestnut,this work adopt chestnut as precursor to prepare carbon electrode,of which the pores,graphitization,and surface atomic doping are synergistically regulated by simply changing the activation temperature.The optimized carbon electrode possesses a hierarchical porous structure with partial graphitization and O and N co doping.Benefited from these merits,the chestnut-derived porous carbon as a supercapacitor electrode,can achieve a high specific capacitance of 328.6 F/g at 1 A/g,which still retains 80.8%when the current density enlarging to 20 A/g.By packaging the symmetric electric double-layer capacitor,the device exhibits a specific capacitance of 63.6 F/g at 1 A/g,delivering an energy density of 12.7 W·h/kg at a power density of 600 W/kg.The stability of the device is tested at a current density of 20 A/g,which shows a capacitance retention rate of up to 90%after 10000 charge-discharge cycles.
基金Project(50621063) supported by the National Natural Science Foundation of ChinaProject (2004CB619204) supported by the National Basic Research and Development Program of China
文摘Microbial community diversities in the drainage from three mines(Dexing Copper Mine,Qibaoshan Copper Mine and Yaogangxian Tungsten Mine,China)were analyzed using 16S rDNA PCR-RFLP approach.The efficiencies of chalcopyrite bioleaching were compared using enrichment of the three cultures.Phylogenetic analysis indicates that the dominant microorganisms are clustered with the Proteobacteria,the remaining is affiliated with Nitrospira,Acidobacteria and Actinobacteria.At the genus level,Acidithiobacillus is the dominant group in both YTW and QBS samples,while Spingomonas is dominant in YGX sample.Moreover,the principal component analysis(PCA)reveals that QBS and YTW have similar geochemical character and microbial communities.The results also show that pH value and tungsten concentration play a key role in microbial community distribution and relative abundance.The bioleaching efficiency of the enrichment cultures from YTW and QBS is similar.After 15 d,the bioleaching rates of low grade chalcopyrite(0.99%)are both up to 99.5% when using 10 g/L pulp density due to the similar microbial composition of YTW and QBS.Moreover,the leaching efficiencies of enrichment cultures containing multiple bioleaching microorganisms are higher than that of pure culture Acidithiobacillus ferrooxidans.
基金Project(50573019)support by the National Natural Science Foundation of China
文摘An intermediate compound 2, 4-bis（laurylamino）-6-（1-（2-aminoethyl）-piperazine）-1, 3, 5-triazine was prepared by stepwise nucleophilic substitution on triazine ring by lauryl amine and subsequently 1-（2-aminoethyl）-piperazine. Then imidization of perylene-3, 4, 9, 10-tetracarboxylic acid dianhydride with 2,4-bis（laurylamino）-6-（1-（2-aminoethyl）-piperazine）-1, 3, 5-triazine was carried out to afford a novel perylene derivative bearing two melamine blocks （S2） and 1, 6, 7, 12-tetra（4-tert-butyl phenoxy）-perylene-3, 4, 9, 10-tetracarboxylic acid bisimide （S1. The hydrogen-bonding interactions between S1 and S2 were investigated by IH NMR spectrum, UV/Vis spectrum and fluorescence spectrum. The influences on the morphologies of S1·S2 aggregates were investigated. The results show that well-defined nanofibers with a diameter of about 100 nm can be obtained by self-assembly between S1 and S2 only in CH2Cl2 solution. Based on these results, guidelines for the molecular design and self-assembly of supramolecular polymer materials are presented.
基金Projects(20772101,50473046) supported by the National Natural Science Foundation of ChinaProject(2007FJ3017) supported by the Hunan Provincial Science Foundation, ChinaProject(07C764) supported by the Science Foundation of the Education Department of Hunan Province,China
文摘An iridium （Ⅲ） bis[（4,6-difluorophenyl）pyridinato-N, C^2][6-（6＇-（4＂-（ 5＂-phenyl- 1＂, 3＂, 4＂-oxadiazole-2＂-yl） phenoxy） hexyloxy picolinate） was synthesized and characterized by IH NMR and elementary analysis in order to study the effect of ancillary ligand of the oxadiazole-based picolinic acid derivative on optophysical properties of its iridium complex, and further to obtain an iridium complex with highly-efficient blue emission. The thermal stability, UV absorption and photoluminescent properties of this iridium complex were investigated. Compared with iridium （Ⅲ） bis[（4,6-difluorophenyl）pyridinato-N, C^2]（picolinate） reported as a highly-efficient blue electroluminescent material, this iridium complex bearing an oxadiazole-based picolinic acid derivative presents higher thermal stability, more intense UV absorption at 291 nm and similar photoluminescent spectrum peaked at 469 nm. This indicates that tuning ancillary ligand of picolinic acid with an oxadiazole unit can improve the optophysical properties of its iridium complex.
基金Project(21071152)supported by the National Natural Science Foundation of China
文摘Three new ferrocene （Fc） based receptors with pyridyl moiety, named methyl-6- ferrocenoylacetyl-2-pyridine carboxylate （FcLl）, 1,1＇-（2,6-bispyridyl）bis-3-ferrocenyl-l,3-propanedione （FcL2）, ferrocenecarboxaldehyde-2,6-dipicolinoyhydrazone （FcL3） were synthesized, and further characterized by elemental analysis, IR spectra, UV-Vis spectra, 1H and 13C NMR. The electrochemical properties and ion sensing properties of FcL1, FcL2 and FcL3 were also investigated by means of cyclic voltammetry in ethanol solution with 0.1 mol/L LiC104 as the supporting electrolyte. The E~ values of the receptors increase with the scanning rate increasing at high scanning rate, and Ipa/Ipo approaches unity, indicating that the redox reaction is basically reversible. Their recognition performances to different metal cations such as Cd（II）, Co（II）, Cu（II）, Hg（II）, Mn（II）, Ni（II）, Zn（II） show that the FcL1 is responsive to Cu（II） with the maximum electrochemical shift of the FcL1 for Cu（II）of about 72.0 mV, whereas the FcL2 is responsive to Cu（II） and Mn（II） with shift of 102 mV and 109 mV, respectively, and the FcL3 is responsive to Hg（II） and Mn（II） with the shift of 53.0 mV and 54.0 mV, respectively. All the results show that these receptors may have potential applications in electrochemical sensor technology, material science, and molecular devices.
基金Project(20876180) supported by the National Natural Science Foundation of China
文摘The quantitative structure-activity relationship(QSAR) of 2-alkyl-4-(biphenylylmethoxy) pyridine derivatives was studied.Three different alignment methods were used to get the models of the comparative molecular field analysis(CoMFA),the comparative molecular similarity indices analysis(CoMSIA),and the hologram quantitative structure?activity relationship(HQSAR).The statistical results from the established models show believable predictivity based on the cross-validated value(q2>0.5) and the non-validated value(r2>0.9),The analysis on contour maps of CoMFA and CoMSIA models suggests that hydrophobic and hydrogen-bond acceptor fields are important factors that affect the AT1 antagonistic activity of 2-alkyl-4-(biphenylylmethoxy) pyridine derivatives besides the steric and electrostatic fields,The structural modification information from different atom contributions in the HQSAR model is in agreement with that in the 3D-QSAR models.
基金Project(51208102)supported by the National Natural Science Foundation of China
文摘Zn2GeO4 nanorods were prepared by a surfactant-assisted solution phase route.The as-prepared products were characterized by X-ray powder diffraction(XRD),scanning electron microscopy(SEM),high-resolution transmission electron microscopy(HRTEM),inductively coupled plasma atomic emission spectrometer(ICP-AES),UV-vis diffuse reflection spectroscopy and photoluminescence(PL) spectroscopy.The possible formation mechanism of Zn2GeO4 nanorods was discussed.It was supposed that the CTA+ cations preferentially adsorb on the planes of Zn2GeO4 nanorods,leading to preferential growth along the c-axis to form the Zn2GeO4 rods with larger aspect ratio and higher surface area,which showed the improved photocatalytic activity for photoreduction of CO2.The photoluminescence(PL) property of Zn2GeO4 nanorods was investigated through the emission spectra.
