期刊文献+
共找到22篇文章
< 1 2 >
每页显示 20 50 100
一种基于单片机的步进电机控制驱动器 被引量:5
1
作者 蚩小霞 赵龙庆 徐国栋 《西南林学院学报》 2005年第2期68-70,共3页
介绍了由Motorola单片机及L297,L298等集成电路构成的步进电机控制驱动器的原理及组成.
关键词 步进电机 MOTOROLA单片机 1297 1298 控制驱动器 单片机 MOTOROLA 电路构成 L298
在线阅读 下载PDF
适用于PLC的新型步进电动机控制驱动器
2
作者 朱文 周传德 《制造技术与机床》 CSCD 北大核心 2001年第2期14-15,共2页
介绍了一种新型步进电动机控制驱动器。该驱动器充分利用了单片机运行速度高和软件控制灵活的特点 ,将传统的PLC步进电动机控制模块与驱动电源合二为一 ,开发出一种价格低、性能优良的新型运动控制产品 ,并已应用于数控标记机。
关键词 步进电动机 PLC 控制驱动器
在线阅读 下载PDF
一种偏心拨杆数字阀用位置伺服控制驱动器的设计 被引量:3
3
作者 张立娟 朱家厅 +2 位作者 孟淑平 郑悫 左哲清 《液压与气动》 北大核心 2021年第1期179-183,共5页
为解决传统数字阀驱动复杂、可靠性低、控制驱动器体积大等问题,设计了一种偏心拨杆数字阀用位置控制驱动器。该控制驱动器以STM32F103RET6作为控制核心,以LMD18200智能模块作为驱动单元,采用模拟霍尔位置传感器检测电机转角位置,通过... 为解决传统数字阀驱动复杂、可靠性低、控制驱动器体积大等问题,设计了一种偏心拨杆数字阀用位置控制驱动器。该控制驱动器以STM32F103RET6作为控制核心,以LMD18200智能模块作为驱动单元,采用模拟霍尔位置传感器检测电机转角位置,通过控制有限转角电机,进而实现对偏心拨杆数字伺服阀的驱动。介绍了伺服系统的总体方案、系统硬件、软件设计及控制算法,并对系统样机进行了试验。试验证明,该伺服控制驱动器集成度高,体积小,能够实现高精度、高动态的位置伺服控制。 展开更多
关键词 有限转角电机 位置伺服控制驱动器 偏心拨杆数字伺服阀
在线阅读 下载PDF
一种控制驱动器的振动仿真与验证
4
作者 牛涛 赵宇飞 闫丽媛 《导弹与航天运载技术(中英文)》 CSCD 北大核心 2023年第6期81-86,共6页
为了验证控制驱动器在复杂振动环境下的适应性及内部结构的振动放大情况,以一种控制驱动器为研究对象,基于随机振动理论,对其进行振动仿真分析,得到结构响应和应力结果。通过修正优化仿真分析参数,减小仿真结果与随机振动试验结果的偏差... 为了验证控制驱动器在复杂振动环境下的适应性及内部结构的振动放大情况,以一种控制驱动器为研究对象,基于随机振动理论,对其进行振动仿真分析,得到结构响应和应力结果。通过修正优化仿真分析参数,减小仿真结果与随机振动试验结果的偏差,得到更准确可靠的仿真分析方法,从而对控制驱动器的抗振动设计提供理论指导作用。 展开更多
关键词 控制驱动器 振动仿真 随机振动 试验
在线阅读 下载PDF
高精度UUV浮力调节装置控制驱动技术研究 被引量:8
5
作者 田冠枝 苑利维 +2 位作者 宋显成 姜丽婷 李真山 《舰船科学技术》 北大核心 2019年第21期108-111,共4页
在分析高精度浮力调节装置结构及功能的基础上,提出了该装置的控制驱动器硬件及软件设计方案。该控制驱动器选用TMS320F28335作为主控制芯片,采用容积、速度、电流三闭环控制以实现控制驱动器对浮力调节装置容积的高精度控制;采用模拟... 在分析高精度浮力调节装置结构及功能的基础上,提出了该装置的控制驱动器硬件及软件设计方案。该控制驱动器选用TMS320F28335作为主控制芯片,采用容积、速度、电流三闭环控制以实现控制驱动器对浮力调节装置容积的高精度控制;采用模拟加载台对该浮力调节装置中的泵进行加载试验,验证了该控制驱动器的带载性能;采用试验验证了基于多级液压缸的容积控制算法的控制精度,表明该控制驱动器能够满足高精度浮力调节装置的性能要求。 展开更多
关键词 UUV 浮力调节装置 控制驱动器 电机
在线阅读 下载PDF
基于PLC驱动的步进电机的HL-2A装置孔栏位移控制系统的设计与实现 被引量:5
6
作者 田培红 许婕 《核聚变与等离子体物理》 CAS CSCD 北大核心 2018年第4期428-436,共9页
为了实现HL-2A装置孔栏位移自动控制,根据步进电机的应用原理,设计了孔栏位移自动控制系统。选用两相混合式步进电机,采用S7-300PLC作为主控制器,FM453作为步进电机的定位模块,实现了对孔栏步进电机的驱动、控制与检测。同时完成了与上... 为了实现HL-2A装置孔栏位移自动控制,根据步进电机的应用原理,设计了孔栏位移自动控制系统。选用两相混合式步进电机,采用S7-300PLC作为主控制器,FM453作为步进电机的定位模块,实现了对孔栏步进电机的驱动、控制与检测。同时完成了与上位机的通信,实现了对HL-2A装置孔栏位移设置和数据显示等功能。 展开更多
关键词 步进电机 可编程序控制 控制驱动器 HL-2A装置 孔栏
在线阅读 下载PDF
基于嵌入式技术的带式输送机控制系统 被引量:3
7
作者 徐西义 《工矿自动化》 北大核心 2012年第2期68-70,共3页
针对基于PLC的带式输送机控制系统存在体积大、PLC程序更改不方便、成本高等问题,提出了一种基于嵌入式技术的带式输送机控制系统的设计方案;详细介绍了该系统中嵌入式本质安全控制机、控制驱动器、远程I/O模块的硬件及软件设计。实际... 针对基于PLC的带式输送机控制系统存在体积大、PLC程序更改不方便、成本高等问题,提出了一种基于嵌入式技术的带式输送机控制系统的设计方案;详细介绍了该系统中嵌入式本质安全控制机、控制驱动器、远程I/O模块的硬件及软件设计。实际应用表明,该系统解决了基于PLC的带式输送机控制系统存在的问题,具有较好的稳定性、灵活性和友好性。 展开更多
关键词 带式输送机 嵌入式技术 本质安全控制 控制驱动器 远程I/O模块 CAN总线
在线阅读 下载PDF
基于GD32F450ZKT6的数模混合式比例控制阀驱动器设计
8
作者 杨斌 崔永智 +3 位作者 谢福起 梁珺 龚征华 陈礼 《液压与气动》 2025年第9期77-86,共10页
针对现有比例控制阀驱动器存在控制精度不稳定、各型设备匹配不完善,不能满足现代电液控制系统提出的灵活性、快速性和国产化要求的问题,设计了一种基于GD32F450ZKT6控制芯片的数模混合式比例控制阀驱动器。通过主控制模块电路、功率放... 针对现有比例控制阀驱动器存在控制精度不稳定、各型设备匹配不完善,不能满足现代电液控制系统提出的灵活性、快速性和国产化要求的问题,设计了一种基于GD32F450ZKT6控制芯片的数模混合式比例控制阀驱动器。通过主控制模块电路、功率放大电路、ADC采样电路以及CAN和USB通信电路实现了数模混合式比例控制阀驱动器的多种类指令信号输入、上位机配置参数以及输出精度控制功能;进一步设计了试验平台对数模混合式比例控制阀驱动器进行性能试验。试验表明,数模混合式比例控制阀驱动器在输入不同类型的信号指令时输出精度小于2%,具备多控制参数的配置功能,满足多场景的电液控制要求。 展开更多
关键词 比例控制驱动器 电液比例控制 嵌入式软件 CAN总线
在线阅读 下载PDF
电主轴技术讲座 第三讲 电主轴的电动机及其驱动模块 被引量:3
9
作者 周延祐 李中行 《制造技术与机床》 CSCD 北大核心 2003年第9期86-87,共2页
关键词 机床 电主轴 电动机 驱动模块 变频器 矢量控制驱动器
在线阅读 下载PDF
瑞萨的LTPS彩色LCD驱动IC支持240×360像素
10
《现代电子技术》 2005年第6期i003-i003,共1页
瑞萨科技公司近日发布一款单片LCD控制器驱动器R63400。该芯片支持高于QVGA的分辨率,即240×36像素,可用于手机和PDA所使用的低温多晶硅(LTPS)TFT彩色LCD面板。
关键词 瑞萨科技公司 单片LCD控制驱动器 R63400 分辨率 芯片性能
在线阅读 下载PDF
连续送料、旋转式同步动态飞剪系统的研究
11
作者 张远深 陈雷 +2 位作者 刘玉波 刘小华 胡晓涵 《液压与气动》 北大核心 2009年第11期1-2,共2页
该文从包装机械工程的实际出发,设计了一种用于"定长裁切"的飞剪控制驱动器及其系统的设置控制。该系统具有定位精度高、控制过程简单等特点,并已在工程实践中应用。
关键词 定长裁切 控制驱动器 飞剪
在线阅读 下载PDF
OLED矩阵显示屏运动图像的一种实现方法 被引量:5
12
作者 宫莹光 高丽 +5 位作者 张步新 朱文清 张志林 蒋雪茵 赵玉蕾 许少鸿 《上海大学学报(自然科学版)》 CAS CSCD 2002年第4期326-329,共4页
介绍了实现有机发光二极管 (OL ED)图形显示的一种方法 .通过设计软件 ,实现了无交叉效应、高清晰度的OL
关键词 OLED矩阵显示屏 运动图像 有机发光二极管 电致发光显示控制驱动器 矩阵显示 交叉效应 图形显示
在线阅读 下载PDF
一种嵌入式智能打标机的研制 被引量:3
13
作者 盖光江 赵连玉 《机电工程》 CAS 2010年第1期88-90,102,共4页
针对现有打标机存在的不足,设计了一种嵌入式打标机。采用功能强大、功耗低的嵌入式微处理器ARM及可控性好的气动打标技术,完成了打标机的硬件设计,将控制器与驱动器集成一体,结构紧凑。并介绍了其上、下位机的软件系统。改善了气动打... 针对现有打标机存在的不足,设计了一种嵌入式打标机。采用功能强大、功耗低的嵌入式微处理器ARM及可控性好的气动打标技术,完成了打标机的硬件设计,将控制器与驱动器集成一体,结构紧凑。并介绍了其上、下位机的软件系统。改善了气动打标机的性能,使其能更方便、准确地完成打标内容。研究结果表明,所设计的智能打标机取得了预期效果,并且具有较广泛的应用前景。 展开更多
关键词 嵌入式微处理器 ARM 气动打标机 控制驱动器
在线阅读 下载PDF
Disturbance observer based position tracking of electro-hydraulic actuator 被引量:4
14
作者 国凯 魏建华 田启岩 《Journal of Central South University》 SCIE EI CAS CSCD 2015年第6期2158-2165,共8页
A nonlinear controller based on an extended second-order disturbance observer is presented to track desired position for an electro-hydraulic single-rod actuator in the presence of both external disturbances and param... A nonlinear controller based on an extended second-order disturbance observer is presented to track desired position for an electro-hydraulic single-rod actuator in the presence of both external disturbances and parameter uncertainties. The proposed extended second-order disturbance observer deals with not only the external perturbations, but also parameter uncertainties which are commonly regarded as lumped disturbances in previous researches. Besides, the outer position tracking loop is designed with cylinder load pressure as output; and the inner pressure control loop provides the hydraulic actuator the characteristic of a force generator. The stability of the closed-loop system is provided based on Lyapunov theory. The performance of the controller is verified through simulations and experiments. The results demonstrate that the proposed nonlinear position tracking controller, together with the extended second-order disturbance observer, gives an excellent tracking performance in the presence of parameter uncertainties and external disturbance. 展开更多
关键词 electro-hydraulic system single-rod actuator disturbance observer external disturbance parameter uncertainty
在线阅读 下载PDF
Trajectory tracking control for underactuated unmanned surface vehicles with dynamic uncertainties 被引量:10
15
作者 廖煜雷 张铭钧 +1 位作者 万磊 李晔 《Journal of Central South University》 SCIE EI CAS CSCD 2016年第2期370-378,共9页
The trajectory tracking control problem for underactuated unmanned surface vehicles(USV) was addressed, and the control system took account of the uncertain influences induced by model perturbation, external disturban... The trajectory tracking control problem for underactuated unmanned surface vehicles(USV) was addressed, and the control system took account of the uncertain influences induced by model perturbation, external disturbance, etc. By introducing the reference, trajectory was generated by a virtual USV, and the error equation of trajectory tracking for USV was obtained, which transformed the tracking problem of underactuated USV into the stabilization problem of the trajectory tracking error equation. A backstepping adaptive sliding mode controller was proposed based on backstepping technology and method of dynamic slide model control. By means of theoretical analysis, it is proved that the proposed controller ensures that the solutions of closed loop system have the ultimate boundedness property. Simulation results are presented to illustrate the effectiveness of the proposed controller. 展开更多
关键词 trajectory tracking UNDERACTUATED unmanned surface vehicle (USV) BACKSTEPPING dynamic sliding mode control
在线阅读 下载PDF
Trajectory planning and tracking control for underactuated unmanned surface vessels 被引量:8
16
作者 廖煜雷 苏玉民 曹建 《Journal of Central South University》 SCIE EI CAS 2014年第2期540-549,共10页
The trajectory planning and tracking control for an underactuated unmanned surface vessel(USV) were addressed.The reference trajectory was generated by a virtual USV,and the error equation of trajectory tracking for u... The trajectory planning and tracking control for an underactuated unmanned surface vessel(USV) were addressed.The reference trajectory was generated by a virtual USV,and the error equation of trajectory tracking for underactuated USV was obtained,which transformed the tracking and stabilization problem of underactuated USV into the stabilization problem of the trajectory tracking error equation.A nonlinear state feedback controller was proposed based on backstepping technique and Lyapunov's direct method.By means of Lyapunov analysis,it is proved that the proposed controller ensures that the solutions of closed loop system have the ultimate boundedness property.Numerical simulation results are presented to validate the effectiveness and robustness of the proposed controller. 展开更多
关键词 trajectory tracking STABILIZATION underactuated unmanned surface vessel BACKSTEPPING
在线阅读 下载PDF
A nonlinear bottom-following controller for underactuated autonomous underwater vehicles 被引量:6
17
作者 贾鹤鸣 张利军 +3 位作者 边信黔 严浙平 程相勤 周佳加 《Journal of Central South University》 SCIE EI CAS 2012年第5期1240-1248,共9页
The bottom-following problem for underactuated autonomous underwater vehicles (AUV) was addressed by a new type of nonlinear decoupling control law. The vertical bottom-following error and pitch angle error are stab... The bottom-following problem for underactuated autonomous underwater vehicles (AUV) was addressed by a new type of nonlinear decoupling control law. The vertical bottom-following error and pitch angle error are stabilized by means of the stem plane, and the thruster is left to stabilize the longitudinal bottom-following error and forward speed. In order to better meet the need of engineering applications, working characteristics of the actuators were sufficiently considered to design the proposed controller. Different from the traditional method, the methodology used to solve the problem is generated by AUV model without a reference orientation, and it deals explicitly with vehicle dynamics and the geometric characteristics of the desired tracking bottom curve. The estimation of systemic uncertainties and disturbances and the pitch velocity PE (persistent excitation) conditions are not required. The stability analysis is given by Lyapunov theorem. Simulation results of a full nonlinear hydrodynamic AUV model are provided to validate the effectiveness and robustness of the proposed controller. 展开更多
关键词 underactuated autonomous underwater vehicle bottom-following nonlinear iterative sliding mode
在线阅读 下载PDF
Diving control of underactuated unmanned undersea vehicle using integral-fast terminal sliding mode control 被引量:4
18
作者 严浙平 于浩淼 侯恕萍 《Journal of Central South University》 SCIE EI CAS CSCD 2016年第5期1085-1094,共10页
The problem of diving control for an underactuated unmanned undersea vehicle(UUV) considering the presence of parameters perturbations and wave disturbances was addressesed.The vertical motion of an UUV was divided in... The problem of diving control for an underactuated unmanned undersea vehicle(UUV) considering the presence of parameters perturbations and wave disturbances was addressesed.The vertical motion of an UUV was divided into two noninteracting subsystems for surge velocity control and diving.To stabilize the vertical motion system,the surge velocity and the depth control controllers were proposed using backstepping technology and an integral-fast terminal sliding mode control(IFTSMC).It is proven that the proposed control scheme can guarantee that all the error signals in the whole closed-loop system globally converge to the sliding surface in finite time and asymptotically converge to the origin along the sliding surface.With a unified control parameters for different motion states,a series of numerical simulation results illustrate the effectiveness of the above designed control scheme,which also shows strong robustness against parameters perturbations and wave disturbances. 展开更多
关键词 integral-fast terminal sliding mode control depth control underactuated unmanned undersea vehicle
在线阅读 下载PDF
Hybrid control based on inverse Prandtl-Ishlinskii model for magnetic shape memory alloy actuator 被引量:2
19
作者 周淼磊 高巍 田彦涛 《Journal of Central South University》 SCIE EI CAS 2013年第5期1214-1220,共7页
The hysteresis characteristic is the major deficiency in the positioning control of magnetic shape memory alloy actuator. A Prandtl-Ishlinskii model was developed to characterize the hysteresis of magnetic shape memor... The hysteresis characteristic is the major deficiency in the positioning control of magnetic shape memory alloy actuator. A Prandtl-Ishlinskii model was developed to characterize the hysteresis of magnetic shape memory alloy actuator. Based on the proposed Prandtl-Ishlinskii model, the inverse Prandtl-Ishlinskii model was established as a feedforward controller to compensate the hysteresis of the magnetic shape memory alloy actuator. For further improving of the positioning precision of the magnetic shape memory alloy actuator, a hybrid control method with hysteresis nonlinear model in feedforward loop was proposed. The control method is separated into two parts: a feedforward loop with inverse Prandtl-Ishlinskii model and a feedback loop with neural network controller. To validate the validity of the proposed control method, a series of simulations and experiments were researched. The simulation and experimental results demonstrate that the maximum error rate of open loop controller based on inverse PI model is 1.72%, the maximum error rate of the hybrid controller based on inverse PI model is 1.37%. 展开更多
关键词 magnetic shape memory alloy HYSTERESIS hybrid control Prandtl-Ishlinskii model neural network
在线阅读 下载PDF
Controller design based on viscoelasticity dynamics model and experiment for flexible drive unit 被引量:1
20
作者 吴伟国 侯月阳 《Journal of Central South University》 SCIE EI CAS 2014年第12期4468-4477,共10页
In order to ensure that the system has the advantage of light weight and vibration absorption, the steel rope is used as a flexible transmission part. A flexible drive unit(FDU) is developed, whose features are guided... In order to ensure that the system has the advantage of light weight and vibration absorption, the steel rope is used as a flexible transmission part. A flexible drive unit(FDU) is developed, whose features are guided by steel rope, increasing force by the movable pulley group, modular, convenient and flexible. Dynamics model for controller is deduced based on the constitutive equation of viscoelasticity. Controller is designed for position control and is based on the viscoelasticity dynamics model compensation control strategy proposed. The control system is based on the TURBO PMAC multi-axis motion control card.Prototype loading experiments and velocity experiments results show that the FDU can reach 2 Hz with no load and the max speed of 30(°)/s. The FDU has the capability of the load torque 11.2 N·m and the speed of 24(°)/s simultaneously, and the frequency response is 1.3 Hz. The FDU can be used to be the pitch joint of hip for biped robot whose walking speed is 0.144 km/h theoretically. 展开更多
关键词 flexible drive unit steel rope drive viscoelasticity dynamic model speed-load characteristic
在线阅读 下载PDF
上一页 1 2 下一页 到第
使用帮助 返回顶部