§.1 无限递归的条件 1.1 Chomsky认为语言是种可无限递归的装置,即在一个短语结构中,同一条“转写规则”可加以无限次的反复运用。当然,无限递归不是无条件的。人们首先想到的是来自人类短时记忆限度的限制。但某些转写规则的应...§.1 无限递归的条件 1.1 Chomsky认为语言是种可无限递归的装置,即在一个短语结构中,同一条“转写规则”可加以无限次的反复运用。当然,无限递归不是无条件的。人们首先想到的是来自人类短时记忆限度的限制。但某些转写规则的应用却可以不受短时记忆限度的限制。如: (1)A: This is the cat that chased the rat that ate the malt that lay in the house that was built by lack……说话者可以任意延长下去,也就是说,把“展开更多
Based on the fact that the shear stress along anchorage segment is neither linearly nor uniformly distributed, the load transfer mechanism of the tension type anchor was studied and the mechanical characteristic of an...Based on the fact that the shear stress along anchorage segment is neither linearly nor uniformly distributed, the load transfer mechanism of the tension type anchor was studied and the mechanical characteristic of anchorage segment was analyzed. Shear stress?strain relationship of soil surrounding anchorage body was simplified into three-folding-lines model consisting of elastic phase, elasto-plastic phase and residual phase considering its softening characteristic. Meanwhile, shear displacement method that has been extensively used in the analysis of pile foundation was introduced. Based on elasto-plastic theory, the distributions of displacement, shear stress and axial force along the anchorage segment of tension type anchor were obtained, and the formula for calculating the elastic limit load was also developed accordingly. Finally, an example was given to discuss the variation of stress and displacement in the anchorage segment with the loads exerted on the anchor, and a program was worked out to calculate the anchor maximum bearing capacity. The influence of some parameters on the anchor bearing capacity was discussed, and effective anchorage length was obtained simultaneously. The results show that the shear stress first increases and then decreases and finally trends to the residual strength with increase of distance from bottom of the anchorage body, the displacement increases all the time with the increase of distance from bottom of the anchorage body, and the increase of velocity gradually becomes greater.展开更多
In this study,the effect of influencing parameters on the stress distribution around a polygonal cutout within a laminated composite under uniform heat flux was analytically examined.The analytical method was develope...In this study,the effect of influencing parameters on the stress distribution around a polygonal cutout within a laminated composite under uniform heat flux was analytically examined.The analytical method was developed based on the classical laminated plate theory and two-dimensional thermo-elastic method.A mapping function was employed to extend the solution of a perforated symmetric laminate with a circular cutout to the solution of polygonal cutouts.The effect of significant parameters such as the cutout angular position,bluntness and aspect ratio,the heat flux angle and the laminate stacking sequence in symmetric composite laminate containing triangular,square and pentagonal cutouts was studied.The Neumann boundary condition was used at the edges of the thermally insulated polygonal cutout.The laminate was made of graphite/epoxy(AS/3501) material with two different stacking sequences of [30/45]sand[30/0/-30]_(s).The analytical solutions were well validated against finite element results.展开更多
The soil masses of slopes were assumed to follow a nonlinear failure criterion and a nonassociated flow rule.The stability factors of slopes were calculated using vertical slice method based on limit analysis.The pote...The soil masses of slopes were assumed to follow a nonlinear failure criterion and a nonassociated flow rule.The stability factors of slopes were calculated using vertical slice method based on limit analysis.The potential sliding mass was divided into a series of vertical slices as well as the traditional slice technique.Equating the external work rate to the internal energy dissipation,the optimum solutions to stability factors were determined by the nonlinear programming algorithm.From the numerical results,it is found that the present solutions agree well with previous results when the nonlinear criterion reduces to the linear criterion,and the nonassociated flow rule reduces to the associated flow rule.The stability factors decrease by 39.7%with nonlinear parameter varying from 1.0 to 3.0.Dilation and nonlinearity have significant effects on the slope stability factors.展开更多
Deep rock mass possesses some unusual properties due to high earth stress,which further result in new problems that have not been well understood and explained up to date.In order to investigate the deformation mechan...Deep rock mass possesses some unusual properties due to high earth stress,which further result in new problems that have not been well understood and explained up to date.In order to investigate the deformation mechanism,the complete deformation process of deep rock mass,with a great emphasis on local shear deformation stage,was analyzed in detail.The quasi continuous shear deformation of the deep rock mass is described by a combination of smooth functions:the averaged distribution of the original deformation field,and the local discontinuities along the slip lines.Hence,an elasto-plastic model is established for the shear deformation process,in which the rotational displacement is taken into account as well as the translational component.Numerical analysis method was developed for case study.Deformation process of a tunnel under high earth stress was investigated for verification.展开更多
Carrying on a series of compression and shear tests by a large number of specimens, reliabilities of T300/QY8911 laminated composite were studied when dispersibility models were described. The results show that the st...Carrying on a series of compression and shear tests by a large number of specimens, reliabilities of T300/QY8911 laminated composite were studied when dispersibility models were described. The results show that the stress is linearly dependent on the strain and the damage modes of specimens are brittle fracture for both kinds of tests. Dispersibility models of compression and shear strength are expressed as Re-N（415.39, 6 586.36） and Rs-ln（5.071 8, 0.155 3）, respectively. When normal and lognormal distributions were used to describe the dispersibility models of compression and shear strength, and the compression or shear load follows the normal distribution, the almost same failure probability can be obtained from different reliability analysis methods.展开更多
文摘§.1 无限递归的条件 1.1 Chomsky认为语言是种可无限递归的装置,即在一个短语结构中,同一条“转写规则”可加以无限次的反复运用。当然,无限递归不是无条件的。人们首先想到的是来自人类短时记忆限度的限制。但某些转写规则的应用却可以不受短时记忆限度的限制。如: (1)A: This is the cat that chased the rat that ate the malt that lay in the house that was built by lack……说话者可以任意延长下去,也就是说,把“
基金Project(20050532021) supported by the Research Fund for the Doctoral Program of Higher Education
文摘Based on the fact that the shear stress along anchorage segment is neither linearly nor uniformly distributed, the load transfer mechanism of the tension type anchor was studied and the mechanical characteristic of anchorage segment was analyzed. Shear stress?strain relationship of soil surrounding anchorage body was simplified into three-folding-lines model consisting of elastic phase, elasto-plastic phase and residual phase considering its softening characteristic. Meanwhile, shear displacement method that has been extensively used in the analysis of pile foundation was introduced. Based on elasto-plastic theory, the distributions of displacement, shear stress and axial force along the anchorage segment of tension type anchor were obtained, and the formula for calculating the elastic limit load was also developed accordingly. Finally, an example was given to discuss the variation of stress and displacement in the anchorage segment with the loads exerted on the anchor, and a program was worked out to calculate the anchor maximum bearing capacity. The influence of some parameters on the anchor bearing capacity was discussed, and effective anchorage length was obtained simultaneously. The results show that the shear stress first increases and then decreases and finally trends to the residual strength with increase of distance from bottom of the anchorage body, the displacement increases all the time with the increase of distance from bottom of the anchorage body, and the increase of velocity gradually becomes greater.
文摘In this study,the effect of influencing parameters on the stress distribution around a polygonal cutout within a laminated composite under uniform heat flux was analytically examined.The analytical method was developed based on the classical laminated plate theory and two-dimensional thermo-elastic method.A mapping function was employed to extend the solution of a perforated symmetric laminate with a circular cutout to the solution of polygonal cutouts.The effect of significant parameters such as the cutout angular position,bluntness and aspect ratio,the heat flux angle and the laminate stacking sequence in symmetric composite laminate containing triangular,square and pentagonal cutouts was studied.The Neumann boundary condition was used at the edges of the thermally insulated polygonal cutout.The laminate was made of graphite/epoxy(AS/3501) material with two different stacking sequences of [30/45]sand[30/0/-30]_(s).The analytical solutions were well validated against finite element results.
基金Project(200550)supported by the Foundation for the Author of National Excellent Doctoral Dissertation of ChinaProject(200631878557)supported by West Traffic of Science and Technology of China
文摘The soil masses of slopes were assumed to follow a nonlinear failure criterion and a nonassociated flow rule.The stability factors of slopes were calculated using vertical slice method based on limit analysis.The potential sliding mass was divided into a series of vertical slices as well as the traditional slice technique.Equating the external work rate to the internal energy dissipation,the optimum solutions to stability factors were determined by the nonlinear programming algorithm.From the numerical results,it is found that the present solutions agree well with previous results when the nonlinear criterion reduces to the linear criterion,and the nonassociated flow rule reduces to the associated flow rule.The stability factors decrease by 39.7%with nonlinear parameter varying from 1.0 to 3.0.Dilation and nonlinearity have significant effects on the slope stability factors.
基金Project(50825403) supported by the National Science Fund for Distinguished Young ScholarsProject(2010CB732003) supported by the National Key Basic Research Program of ChinaProject(51021001) supported by the Science Fund for Creative Research Group of the National Natural Science Foundation of China
文摘Deep rock mass possesses some unusual properties due to high earth stress,which further result in new problems that have not been well understood and explained up to date.In order to investigate the deformation mechanism,the complete deformation process of deep rock mass,with a great emphasis on local shear deformation stage,was analyzed in detail.The quasi continuous shear deformation of the deep rock mass is described by a combination of smooth functions:the averaged distribution of the original deformation field,and the local discontinuities along the slip lines.Hence,an elasto-plastic model is established for the shear deformation process,in which the rotational displacement is taken into account as well as the translational component.Numerical analysis method was developed for case study.Deformation process of a tunnel under high earth stress was investigated for verification.
基金Project(51175424) supported by the National Natural Science FoundationProject(B07050) supported by the 111 Project,ChinaProject (JC20110257) supported by the Basic Research Foundation of Northwestern Polytechnical University
文摘Carrying on a series of compression and shear tests by a large number of specimens, reliabilities of T300/QY8911 laminated composite were studied when dispersibility models were described. The results show that the stress is linearly dependent on the strain and the damage modes of specimens are brittle fracture for both kinds of tests. Dispersibility models of compression and shear strength are expressed as Re-N（415.39, 6 586.36） and Rs-ln（5.071 8, 0.155 3）, respectively. When normal and lognormal distributions were used to describe the dispersibility models of compression and shear strength, and the compression or shear load follows the normal distribution, the almost same failure probability can be obtained from different reliability analysis methods.
