针对甚小频偏线性调频(very minimum frequency shift-linear frequency modulation,VMFS-LFM)信号对应的分数阶傅里叶(fractional fourier transform,FrFT)域估计参数的绝对值接近1而导致估计性能降低的问题,在借鉴基于FrFT的LFM信号...针对甚小频偏线性调频(very minimum frequency shift-linear frequency modulation,VMFS-LFM)信号对应的分数阶傅里叶(fractional fourier transform,FrFT)域估计参数的绝对值接近1而导致估计性能降低的问题,在借鉴基于FrFT的LFM信号参数估计方法的基础上,采用m倍抽取(m time decimation,mTD)作为预处理方法,提出基于mTD-FrFT的VMFS-LFM信号参数估计方法.理论分析和实验结果表明:mTD预处理过程可增大VMFS-LFM信号和近参数多分量LFM信号的调频斜率在FrFT域的分辨率,使基于mTD-FrFT的参数估计方法可对VMFS-LFM信号和相近参数多分量LFM信号进行有效参数估计.展开更多
The mechanical properties of cemented paste backfill(CPB) depend heavily on its pore structural characteristics and micro-structural changes. In order to explore the variation mechanisms of macro-mechanical characteri...The mechanical properties of cemented paste backfill(CPB) depend heavily on its pore structural characteristics and micro-structural changes. In order to explore the variation mechanisms of macro-mechanical characteristics and micro-structure of CPB. CPB specimens with different mass concentrations prepared from the full tailings of Xianglushan Tungsten Ore were micro-tests. Moreover, acquired pore digital images were processed by using the pores(particles) and cracks analysis system(PCAS), and a sensitivity analysis was performed. The results show that as the mass concentration of CPB increases from 70% to 78%, the porosity, the average pore area and the number of pores drop overall, leading to a decline in the pores opening degree and enhancing the mechanical characteristics. As the mass concentration of CPB increases, the trend of fractal dimension, probability entropy and roundness is reduced, constant and increased, which can result in an enhancement of the uniformity, an unchanged directionality and more round pores. According to the definition of sensitivity, the sensitivities of various micro-parameters were calculated and can be ranked as porosity > average pore area > number of pores > roundness > fractal dimension > probability entropy.展开更多
The sodium expansion curves of semi-graphitic cathode measured with the improved Rapoport-Samoilenko apparatus. The and TiB2/C composite cathode with different TiB2 contents were mathematic model of the sodium expansi...The sodium expansion curves of semi-graphitic cathode measured with the improved Rapoport-Samoilenko apparatus. The and TiB2/C composite cathode with different TiB2 contents were mathematic model of the sodium expansion was deduced on the basis of the experimental results. The sodium expansion parameter （a） and penetration rate factor （Q）, were introduced into the model The model was validated with the experimental sodium expansion curves self-measured and reported. The results show that the variation tendency of the sodium expansion parameter （a） and penetration rate factor （Q） is consistent with that of the experimental curves. The model is capable of not only conveniently judging the cathode quality, but also favorably establishing a unified standard of the resistance to sodium penetration of cathode.展开更多
The performance of a flotation circuit is largely the result of the operator's response to visual clues. This includes manipulation of the gas input and how it is distributed to cells in a bank. A new gas dispersi...The performance of a flotation circuit is largely the result of the operator's response to visual clues. This includes manipulation of the gas input and how it is distributed to cells in a bank. A new gas dispersion technology was presented which was conducted to perform characterization tests in Outokumpu 30 m3 and 50 m3 flotation cells installed at Thompson Vale's concentrator, and subsequent data analysis. The experimental program was designed to establish "as-found" baseline conditions for each cell of the two-parallel banks in the scavenger-cleaner and recleaner circuit, to select and characterize one typical cell in the two banks with either different frother concentrations or different air flow rates, and establish what variables can be manipulated in future characterization work. A three-parameter model was developed in order to link the bubble size and frother concentration. This relationship can be used to correlate gas dispersion change to improved metallurgical performance.展开更多
For the diagnosis of glaucoma,optical coherence tomography(OCT)is a noninvasive imaging technique for the assessment of retinal layers.To accurately segment intraretinal layers in an optic nerve head(ONH)region,we pro...For the diagnosis of glaucoma,optical coherence tomography(OCT)is a noninvasive imaging technique for the assessment of retinal layers.To accurately segment intraretinal layers in an optic nerve head(ONH)region,we proposed an automatic method for the segmentation of three intraretinal layers in eye OCT scans centered on ONH.The internal limiting membrane,inner segment and outer segment,Bruch’s membrane surfaces under vascular shadows,and interaction of multiple high-reflectivity regions in the OCT image can be accurately segmented through this method.Then,we constructed a novel spatial-gradient continuity constraint,termed spatial-gradient continuity constraint,for the correction of discontinuity between adjacent image segmentation results.In our experiment,we randomly selected 20 B-scans,each annotated three retinal layers by experts.Signed distance errors of?0.80μm obtained through this method are lower than those obtained through the state-of-art method(?1.43μm).Meanwhile,the segmentation results can be used as bases for the diagnosis of glaucoma.展开更多
A model for liquid-gas flow （MLGF）, considering the flee movement of liquid surface, was built to simulate the wastewater velocity field and gas distribution in a full-scale Caroussel oxidation ditch with surface ae...A model for liquid-gas flow （MLGF）, considering the flee movement of liquid surface, was built to simulate the wastewater velocity field and gas distribution in a full-scale Caroussel oxidation ditch with surface aeration. It was calibrated and validated by field measurement data, and the calibrated parameters and sections were selected based on both model analysis and numerical computation. The simulated velocities of MLGF were compared to that of a model for wastewater-sludge flow （MWSF）. The results show that the free liquid surface considered in MLGF improves the simulated velocity results of upper layer and surface. Moreover, distribution of gas volume fraction （GVF） simulated by MLGF was compared to dissolved oxygen （DO） measured in the oxidation ditch. It is shown that DO distribution is affected by many factors besides GVF distribution.展开更多
The accurate measurement of kinematic parameters in satellite separation tests has great significance in evaluating separation performance. A novel study is made on the measuring accuracy of monocular and binocular, w...The accurate measurement of kinematic parameters in satellite separation tests has great significance in evaluating separation performance. A novel study is made on the measuring accuracy of monocular and binocular, which are the two main vision measurement methods used for kinematic parameters. As satellite separation process is transient and high-dynamic, it will bring more extraction errors to the binocular. Based on the design approach of intersection measure and variance ratio, the monocular method reflects higher precision, simpler structure and easier calibration for level satellite separation. In ground separation tests, a high-speed monocular system is developed to gain and analyze twelve kinematic parameters of a small satellite. Research shows that this monocular method can be widely applied for its high precision, with position accuracy of 0.5 mm, speed accuracy of 5 mm/s, and angular velocity accuracy of 1 (°)/s.展开更多
文摘针对甚小频偏线性调频(very minimum frequency shift-linear frequency modulation,VMFS-LFM)信号对应的分数阶傅里叶(fractional fourier transform,FrFT)域估计参数的绝对值接近1而导致估计性能降低的问题,在借鉴基于FrFT的LFM信号参数估计方法的基础上,采用m倍抽取(m time decimation,mTD)作为预处理方法,提出基于mTD-FrFT的VMFS-LFM信号参数估计方法.理论分析和实验结果表明:mTD预处理过程可增大VMFS-LFM信号和近参数多分量LFM信号的调频斜率在FrFT域的分辨率,使基于mTD-FrFT的参数估计方法可对VMFS-LFM信号和相近参数多分量LFM信号进行有效参数估计.
基金Projects(51674188,51874229,51504182)supported by the National Natural Science Foundation of ChinaProject(2018KJXX-083)supported by Shaanxi Innovative Talents Cultivate Program-New-star Plan of Science and Technology,China
文摘The mechanical properties of cemented paste backfill(CPB) depend heavily on its pore structural characteristics and micro-structural changes. In order to explore the variation mechanisms of macro-mechanical characteristics and micro-structure of CPB. CPB specimens with different mass concentrations prepared from the full tailings of Xianglushan Tungsten Ore were micro-tests. Moreover, acquired pore digital images were processed by using the pores(particles) and cracks analysis system(PCAS), and a sensitivity analysis was performed. The results show that as the mass concentration of CPB increases from 70% to 78%, the porosity, the average pore area and the number of pores drop overall, leading to a decline in the pores opening degree and enhancing the mechanical characteristics. As the mass concentration of CPB increases, the trend of fractal dimension, probability entropy and roundness is reduced, constant and increased, which can result in an enhancement of the uniformity, an unchanged directionality and more round pores. According to the definition of sensitivity, the sensitivities of various micro-parameters were calculated and can be ranked as porosity > average pore area > number of pores > roundness > fractal dimension > probability entropy.
基金Project(2005CB623703) supported by the Major State Basic Research and Development Program of ChinaProject(2008AA030502) supported by the National High-Tech Research and Development Program of ChinaProject(GUIKEJI0639032) supported by the Science Fund Project of Guangxi Province, China
文摘The sodium expansion curves of semi-graphitic cathode measured with the improved Rapoport-Samoilenko apparatus. The and TiB2/C composite cathode with different TiB2 contents were mathematic model of the sodium expansion was deduced on the basis of the experimental results. The sodium expansion parameter （a） and penetration rate factor （Q）, were introduced into the model The model was validated with the experimental sodium expansion curves self-measured and reported. The results show that the variation tendency of the sodium expansion parameter （a） and penetration rate factor （Q） is consistent with that of the experimental curves. The model is capable of not only conveniently judging the cathode quality, but also favorably establishing a unified standard of the resistance to sodium penetration of cathode.
基金Project(2012BAB14B05)supported by National Key Technology Research and Development Program of the Ministry of Science and Technology of China
文摘The performance of a flotation circuit is largely the result of the operator's response to visual clues. This includes manipulation of the gas input and how it is distributed to cells in a bank. A new gas dispersion technology was presented which was conducted to perform characterization tests in Outokumpu 30 m3 and 50 m3 flotation cells installed at Thompson Vale's concentrator, and subsequent data analysis. The experimental program was designed to establish "as-found" baseline conditions for each cell of the two-parallel banks in the scavenger-cleaner and recleaner circuit, to select and characterize one typical cell in the two banks with either different frother concentrations or different air flow rates, and establish what variables can be manipulated in future characterization work. A three-parameter model was developed in order to link the bubble size and frother concentration. This relationship can be used to correlate gas dispersion change to improved metallurgical performance.
基金Projects(61672542,61573380)supported by the National Natural Science Foundation of China
文摘For the diagnosis of glaucoma,optical coherence tomography(OCT)is a noninvasive imaging technique for the assessment of retinal layers.To accurately segment intraretinal layers in an optic nerve head(ONH)region,we proposed an automatic method for the segmentation of three intraretinal layers in eye OCT scans centered on ONH.The internal limiting membrane,inner segment and outer segment,Bruch’s membrane surfaces under vascular shadows,and interaction of multiple high-reflectivity regions in the OCT image can be accurately segmented through this method.Then,we constructed a novel spatial-gradient continuity constraint,termed spatial-gradient continuity constraint,for the correction of discontinuity between adjacent image segmentation results.In our experiment,we randomly selected 20 B-scans,each annotated three retinal layers by experts.Signed distance errors of?0.80μm obtained through this method are lower than those obtained through the state-of-art method(?1.43μm).Meanwhile,the segmentation results can be used as bases for the diagnosis of glaucoma.
基金Project supported by Visiting Scholar Foundation of Key Laboratory of the Resources Exploitation and Environmental Disaster Control Engineering in Southwest China (Chongqing University),Ministry of Education,China
文摘A model for liquid-gas flow （MLGF）, considering the flee movement of liquid surface, was built to simulate the wastewater velocity field and gas distribution in a full-scale Caroussel oxidation ditch with surface aeration. It was calibrated and validated by field measurement data, and the calibrated parameters and sections were selected based on both model analysis and numerical computation. The simulated velocities of MLGF were compared to that of a model for wastewater-sludge flow （MWSF）. The results show that the free liquid surface considered in MLGF improves the simulated velocity results of upper layer and surface. Moreover, distribution of gas volume fraction （GVF） simulated by MLGF was compared to dissolved oxygen （DO） measured in the oxidation ditch. It is shown that DO distribution is affected by many factors besides GVF distribution.
基金Project(50975280)supported by the National Natural Science Foundation of ChinaProject(NCET-08-0149)supported by Program for New Century Excellent Talents in Universities of China
文摘The accurate measurement of kinematic parameters in satellite separation tests has great significance in evaluating separation performance. A novel study is made on the measuring accuracy of monocular and binocular, which are the two main vision measurement methods used for kinematic parameters. As satellite separation process is transient and high-dynamic, it will bring more extraction errors to the binocular. Based on the design approach of intersection measure and variance ratio, the monocular method reflects higher precision, simpler structure and easier calibration for level satellite separation. In ground separation tests, a high-speed monocular system is developed to gain and analyze twelve kinematic parameters of a small satellite. Research shows that this monocular method can be widely applied for its high precision, with position accuracy of 0.5 mm, speed accuracy of 5 mm/s, and angular velocity accuracy of 1 (°)/s.
