Based on inspection data,the authors analyze and summarize the main types and distribution characteristics of tunnel structural defects.These defects are classified into three types:surface defects,internal defects,an...Based on inspection data,the authors analyze and summarize the main types and distribution characteristics of tunnel structural defects.These defects are classified into three types:surface defects,internal defects,and defects behind the structure.To address the need for rapid detection of different defect types,the current state of rapid detection technologies and equipment,both domestically and internationally,is systematically reviewed.The research reveals that surface defect detection technologies and equipment have developed rapidly in recent years.Notably,the integration of machine vision and laser scanning technologies have significantly improved detection efficiency and accuracy,achieving crack detection precision of up to 0.1 mm.However,the non-contact rapid detection of internal and behind-the-structure defects remains constrained by hardware limitations,with traditional detection remaining dominant.Nevertheless,phased array radar,ultrasonic,and acoustic vibration detection technologies have become research hotspots in recent years,offering promising directions for detecting these challenging defect types.Additionally,the application of multisensor fusion technology in rapid detection equipment has further enhanced detection capabilities.Devices such as cameras,3D laser scanners,infrared thermal imagers,and radar demonstrate significant advantages in rapid detection.Future research in tunnel inspection should prioritize breakthroughs in rapid detection technologies for internal and behind-the-structure defects.Efforts should also focus on developing multifunctional integrated detection vehicles that can simultaneously inspect both surface and internal structures.Furthermore,progress in fully automated,intelligent systems with precise defect identification and real-time reporting will be essential to significantly improve the efficiency and accuracy of tunnel inspection.展开更多
With the acceleration of advanced industrialization and urbanization,the environment is deteriorating rapidly,and non-renewable energy resources are depleted.The gradual advent of potential clean energy storage techno...With the acceleration of advanced industrialization and urbanization,the environment is deteriorating rapidly,and non-renewable energy resources are depleted.The gradual advent of potential clean energy storage technologies is particularly urgent.Electrochemical energy storage technologies have been widely used in multiple fields,especially supercapacitors and rechargeable batteries,as vital elements of storing renewable energy.In recent years,two-dimensional material MXene has shown great potential in energy and multiple application fields thanks to its excellent electrical properties,large specific surface area,and tunability.Based on the layered materials of MXene,researchers have successfully achieved the dual functions of energy storage and conversion by adjusting the surface terminals at the Fermi level.It is worth noting that compared with other two-dimensional materials,MXene has more active sites on the basal plane,showing excellent catalytic performance.In contrast,other two-dimensional materials have catalytic activity only at the edge sites.This article comprehensively overviews the synthesis process,structural characteristics,modification methods for MXene-based polymer materials,and their applications in electrochemical energy storage.It also briefly discusses the potential of MXene-polymer materials in electromagnetic shielding technology and sensors and looks forward to future research directions.展开更多
Objective To evaluate the association of GGN repeat polymorphism of androgen receptor(AR)with ovarian reserve and ovarian response in controlled ovarian stimulation(COS).Methods This genetic association study was cond...Objective To evaluate the association of GGN repeat polymorphism of androgen receptor(AR)with ovarian reserve and ovarian response in controlled ovarian stimulation(COS).Methods This genetic association study was conducted among a total of 361 women aged≤40 years with basal FSH≤12 U/L undergoing the GnRH-agonist long protocol for COS in a university affiliated IVF center.GGN repeat in the AR gene was analyzed with Sanger sequencing.The primary endpoint was the number of antral follicle counts(AFCs),and the secondary endpoints were stimulation days,total dose of gonadotropin(Gn)used,total number of retrieved oocytes,ovarian sensitivity index,and follicular output rate.Results The GGN repeat in exon 1 of the AR gene ranged from 13 to 24,and the median repeat length was 22.Based on the genotypes(S for GGN repeats<22,L for GGN repeats≥22),the patients were divided into 3 groups:SS,SL,and LL.Generalized regression analysis indicated that the number of AFCs in group SS was significantly lower than those in group SL(adjusted β=1.8,95%CI:0.2-3.4,P=0.024)and group LL(adjusted β=1.5,95%CI:0.2-2.7,P=0.021).No significant difference was observed in the number of AFCs between group SL and group LL(P>0.05).Generalized regression analysis indicated no significant differences in ovarian stimulation parameters among the 3 groups,either before or after adjusting for confounding factors(P>0.05).Conclusion GGN repeat length on the AR gene is associated with AFC but not with ovarian response in Chinese women,indicating that AR gene polymorphisms may affect ovarian reserve.展开更多
Petroleum asphalt,an important by-product of the petrochemical industry,has diverse applications but often suffers from low industrial added value.Because of its low cost,high carbon content,and high polycyclic aromat...Petroleum asphalt,an important by-product of the petrochemical industry,has diverse applications but often suffers from low industrial added value.Because of its low cost,high carbon content,and high polycyclic aromatic hydrocarbon content,appropriate modification can increase its value and expand its energy storage applications.Current research progress on the common preparation methods of petroleum asphalt-based carbon materials,including template-assisted pyrolysis,molten salt treatment,activation,heteroatom doping,and pre-oxidation is reviewed,and its use in supercapacitors and alkali metal ion batteries,is also elaborated.Feasible solutions for the current problems with petroleum asphalt are proposed,with the aim of providing insights into its high value-added utilization.展开更多
Sulfide solid electrolytes(S-SEs)are widely preferred for their high ionic conductivity and processability.However,the further development of S-SEs is hindered by the excessive price of its critical raw materials of L...Sulfide solid electrolytes(S-SEs)are widely preferred for their high ionic conductivity and processability.However,the further development of S-SEs is hindered by the excessive price of its critical raw materials of Li_(2)S.Herein,a low-cost and environmentally friendly method is proposed to synthesize Li_(2)S by the carbothermal reduction reaction of Li_(2)SO_(4)in one step,and the effects of various factors are also discussed.As a result,a purity of 99.67%is obtained over the self-prepared Li_(2)S.More importantly,the cost of the self-prepared Li_(2)S is only about 50$/kg,which is significantly lower than that of the commercial counterpart(10000−15000 dollar/kg).Moreover,the ionic conductivity of Li_(5.5)PS_(4.5)Cl_(1.5)prepared using self-prepared Li_(2)S as raw materials is 4.19 mS/cm at room temperature,which is a little higher than that of Li_(5.5)PS_(4.5)Cl_(1.5)using commercial Li_(2)S(4.05 mS/cm).And the all-solid-state lithium batteries(ASSLBs)with the as-prepared electrolytes could maintain a discharge capacity of 109.9 mA·h/g with an average coulombic efficiency(CE)of 98%after 100 cycles at 0.2 C,which is equivalent to that using commercial Li_(2)S,demonstrating that the preparation strategy of Li_(2)S proposed in this work is feasible.展开更多
Defect engineering by heteroatom doping gives carbon materials some new characteristics such as a different electronic structure and a high electrochemical activity,making them suitable for high-performance applicatio...Defect engineering by heteroatom doping gives carbon materials some new characteristics such as a different electronic structure and a high electrochemical activity,making them suitable for high-performance applications.N-doping has been widely investigated because of its similar atom radius to carbon,high electronegativity as well as many different configurations.We summarize the preparation methods and properties of N-doped carbon materials,and discuss their possible use in sodium ion storage.The relationships between N content/configuration and crystallinity,electronic conductivity,wettability,chemical reactivity as well as sodium ion storage performance are discussed.展开更多
Exploitation of sustainable energy sources requires the use of unique conversion and storage systems,such as solar panels,batteries,fuel cells,and electronic equipment.Thermal load management of these energy conversio...Exploitation of sustainable energy sources requires the use of unique conversion and storage systems,such as solar panels,batteries,fuel cells,and electronic equipment.Thermal load management of these energy conversion and storage systems is one of their challenges and concerns.In this article,the thermal management of these systems using thermoelectric modules is reviewed.The results show that by choosing the right option to remove heat from the hot side of the thermoelectric modules,it will be a suitable local cooling,and the thermoelectric modules increase the power and lifespan of the system by reducing the spot temperature.Thermoelectric modules were effective in reducing panel temperature.They increase the time to reach a temperature above 50℃ in batteries by 3 to 4 times.Also,in their integration with fuel cells,they increase the power density of the fuel cell.展开更多
The preparation of large crystals is highly important for the characterization and application of a newly found structure but remains a challenge for one-dimensional(1D)C_(60) polymers.In this work,we successfully fab...The preparation of large crystals is highly important for the characterization and application of a newly found structure but remains a challenge for one-dimensional(1D)C_(60) polymers.In this work,we successfully fabricated a 1D C_(60) polymer crystal via on-site annealing of a millimeter-sized C_(60) molecular crystal withα-Li_(3)N at 500°C and ambient pres�sure.Characterizations show that the C_(60) cages in the crystal have been efficiently connected,forming 1D chains along the<110>direction in an orthorhombic 3D structure.At the same time,the crystal maintains a morphology similar to that of the pristine C_(60)crystal,providing opportunities for characterization of all the facets of the crystal via Raman spectroscopy and thus suggesting the formation mechanism of such crystals.展开更多
Perovskite solar cells(PSCs) have emerged as one of the most promising candidates for photovoltaic applications. Low-cost, low-temperature solution processes including coating and printing techniques makes PSCs promis...Perovskite solar cells(PSCs) have emerged as one of the most promising candidates for photovoltaic applications. Low-cost, low-temperature solution processes including coating and printing techniques makes PSCs promising for the greatly potential commercialization due to the scalability and compatibility with large-scale, roll-to-roll manufacturing processes. In this review, we focus on the solution deposition of charge transport layers and perovskite absorption layer in both mesoporous and planar structural PSC devices. Furthermore, the most recent design strategies via solution deposition are presented as well, which have been explored to enlarge the active area, enhance the crystallization and passivate the defects, leading to the performance improvement of PSC devices.展开更多
Sb-based materials have been considered one of the most promising anode electrode materials for lithium-ion batteries,whereas they were commonly synthesized through time-consuming and costly processes.Here,Sb@Sb2O3/re...Sb-based materials have been considered one of the most promising anode electrode materials for lithium-ion batteries,whereas they were commonly synthesized through time-consuming and costly processes.Here,Sb@Sb2O3/reduced graphene oxide(Sb@Sb2O3/rGO)composite was successfully synthesized by a facile one-pot chemical method at ambient temperature.Based on the XRD and TGA analysis,the mass fractions of Sb and Sb2O3 in the Sb@Sb2O3/rGO composite are ca.34.05%and 26.6%,respectively.When used as an alternative electrode for lithium ion batteries,a high reversible capacity of 790.9 mA·h/g could be delivered after 200 cycles with the capacity retention of 93.8%at a current density of 200 mA/g.And a capacity of 260 mA·h/g could be maintained even at 2000 mA/g.These excellent electrochemical properties can be attributed to its well-constructed nanostructure.The Sb and Sb2O3 particles with size of 10 nm were tightly anchored on rGO sheets through electronic coupling,which could not only alleviate the stress induced by the volume expansion,suppress the aggregation of Sb and Sb2O3 particles,but also improve the electron transfer ability during cycling.展开更多
Physiological parameters of people and enact assessment standard of indoor thermal environment that are appropriate to our national conditions were explored from the perspective of physiology. From December 2005 to Ja...Physiological parameters of people and enact assessment standard of indoor thermal environment that are appropriate to our national conditions were explored from the perspective of physiology. From December 2005 to January 2006, nerve conduction velocities and skin temperatures of 20 healthy students were tested with questionnaire investigation. The results show that the nerve conduction velocities as well as skin temperatures present an obvious decline trend in a continuous draught, and that the nerve conduction velocities and skin temperatures have a definite linear relationship. Draught velocity is an important factor in winter that affects body comfort, and the subjects are sensitive to air velocity.展开更多
A new tamping device which is driven by an electrohydraulic exciter was proposed to overcome the limitations of mechanically driven devices.The double-rod oscillation cylinder drives the tamping arm to realize vibrati...A new tamping device which is driven by an electrohydraulic exciter was proposed to overcome the limitations of mechanically driven devices.The double-rod oscillation cylinder drives the tamping arm to realize vibration.A new spin valve was designed in order to fulfill dynamic state requirements of the oscillation cylinder.Parametric analysis was carried out by establishing mathematic model.Then,the relationships among the structure of valve port and the frequency,amplitude,output shock force of the cylinder were researched.An experimental device of the electrohydraulic exciter was established to validate the theoretical results.The signals were acquired by AVANT dynamic signal analyser of vibration.The results show that new tamping device can satisfy all kinds of complex working conditions with the flexible adjustment of frequency and amplitude.展开更多
The purpose of this study is to develop an integrated framework for capacity analysis to address the influence of systematic hazardous factors on the haulage fleet nominal capacity.The proposed model was made to captu...The purpose of this study is to develop an integrated framework for capacity analysis to address the influence of systematic hazardous factors on the haulage fleet nominal capacity.The proposed model was made to capture unexpected risks for mining equipment based upon data-driven method considering different scenarios.Probabilistic risk assessment(PRA)was employed to quantify the loss of production capacity by focusing on severity of failure incidents and maintainability measurements.Discrete-event simulation was configured to characterize the nominal capacity for mining operation.Accordingly,the system capacity was analyzed through the comparison of nominal and actual capacity.A case study was completed to validate the research methodology.The past operation and maintenance field data were collected for shovel operation.The discrete-event simulation was developed to estimate the rate of shovel nominal capacity.Then,the effects of undesirable scenarios were assessed by developing the PRA approach.The research results provide significant insights into how to enhance the production capacity in mines.The analyst gets a well judgment for the crucial elements dealing with high risk levels.A holistic maintenance plan can be developed to mitigate and control the losses.展开更多
The solution chemical and optical characteristics of formation of amine-terminated polyamidoamine dendrimer G2.0（NH2-PAMAM G2.0）-Au nanocomposites in the aqueous solution of NH2-PAMAM G2.0 at various mole ratios of...The solution chemical and optical characteristics of formation of amine-terminated polyamidoamine dendrimer G2.0（NH2-PAMAM G2.0）-Au nanocomposites in the aqueous solution of NH2-PAMAM G2.0 at various mole ratios of Au（Ⅲ） to NH2-PAMAM G2.0 were studied by both UV-visible spectrometry and fluorospectrometry. The NH2-PAMAM G2.0-Au nanocomposites, with a type of structure in which one Au nanoparticle is surrounded by several NH2-PAMAM G2.0 dendrimers, emit strong bluish violet fluorescence, and are uniform, water soluble and biocompatible as well as very stable in frozen conditions. The size of gold nanoparticles in the nanocomposites is about 2.5 nm and decreases with the increase of NH2-PAMAM G2.0 concentration. The NH2-PAMAM G2.0 plays an important role in acting as host or micro-reactor for Au（Ⅲ） before Au（Ⅲ） reduction and acting as dispersant and stabilizer for gold nanoparticles after Au（Ⅲ） reduction. Preliminary experiments of cells staining to human embryonic lung fibroblast cell lines show that the NH2-PAMAM G2.0-Au nanocomposites can be used as optical imaging markers for bioanalyses and medical diagnoses.展开更多
Adhesive for bamboo plywood prepared directly using lignin existing in the black liquor as a kind of material replacing phenol was proposed on the basis of the same structural properties of lignin and phenol. The resu...Adhesive for bamboo plywood prepared directly using lignin existing in the black liquor as a kind of material replacing phenol was proposed on the basis of the same structural properties of lignin and phenol. The results indicate that the reaction time of black liquor methylating is 30min, when the ratio of alkali to formaldehyde is controlled at approximately 0.20, decomposition rate of formaldehyde is the lowest and the effect of black liquor methylating is the best, the optimal molar ratio of phenol： formaldehyde to NaOH to H2O of preparing phenolic resin is 1.00 ： 1.50 ： 0.50 ： 9.00, and the suitable viscosity is 27 - 30 Pa· s. At different mass ratios of methylated black liquor to phenolic resin, all terms of performance of black liquor phenolic resin are excellent and satisfy the requirement. All terms of performance of bamboo plywood prepared using this technique are hetter than that of excellent bamboo plywood of national criteria. Using this technique, the cost is depressed by 28.69% without altering the traditional adhesive producing technique flow, and without using additional equipment.展开更多
文摘Based on inspection data,the authors analyze and summarize the main types and distribution characteristics of tunnel structural defects.These defects are classified into three types:surface defects,internal defects,and defects behind the structure.To address the need for rapid detection of different defect types,the current state of rapid detection technologies and equipment,both domestically and internationally,is systematically reviewed.The research reveals that surface defect detection technologies and equipment have developed rapidly in recent years.Notably,the integration of machine vision and laser scanning technologies have significantly improved detection efficiency and accuracy,achieving crack detection precision of up to 0.1 mm.However,the non-contact rapid detection of internal and behind-the-structure defects remains constrained by hardware limitations,with traditional detection remaining dominant.Nevertheless,phased array radar,ultrasonic,and acoustic vibration detection technologies have become research hotspots in recent years,offering promising directions for detecting these challenging defect types.Additionally,the application of multisensor fusion technology in rapid detection equipment has further enhanced detection capabilities.Devices such as cameras,3D laser scanners,infrared thermal imagers,and radar demonstrate significant advantages in rapid detection.Future research in tunnel inspection should prioritize breakthroughs in rapid detection technologies for internal and behind-the-structure defects.Efforts should also focus on developing multifunctional integrated detection vehicles that can simultaneously inspect both surface and internal structures.Furthermore,progress in fully automated,intelligent systems with precise defect identification and real-time reporting will be essential to significantly improve the efficiency and accuracy of tunnel inspection.
基金supported by the Natural Science Basic Research Plan in the Shaanxi Province of China(No.2023-JC-ZD-25)Shaanxi Province(Qin ChuangYuan)“Scientist+Engineer”Team Building(No.2022KXJ-040)+1 种基金Shaanxi Provincial Department of Education Key Scientific Research Project(No.22JY024)Science and Technology Guidance Project Plan of China National Textile and Apparel Council(No.2022038,2023018).
文摘With the acceleration of advanced industrialization and urbanization,the environment is deteriorating rapidly,and non-renewable energy resources are depleted.The gradual advent of potential clean energy storage technologies is particularly urgent.Electrochemical energy storage technologies have been widely used in multiple fields,especially supercapacitors and rechargeable batteries,as vital elements of storing renewable energy.In recent years,two-dimensional material MXene has shown great potential in energy and multiple application fields thanks to its excellent electrical properties,large specific surface area,and tunability.Based on the layered materials of MXene,researchers have successfully achieved the dual functions of energy storage and conversion by adjusting the surface terminals at the Fermi level.It is worth noting that compared with other two-dimensional materials,MXene has more active sites on the basal plane,showing excellent catalytic performance.In contrast,other two-dimensional materials have catalytic activity only at the edge sites.This article comprehensively overviews the synthesis process,structural characteristics,modification methods for MXene-based polymer materials,and their applications in electrochemical energy storage.It also briefly discusses the potential of MXene-polymer materials in electromagnetic shielding technology and sensors and looks forward to future research directions.
文摘Objective To evaluate the association of GGN repeat polymorphism of androgen receptor(AR)with ovarian reserve and ovarian response in controlled ovarian stimulation(COS).Methods This genetic association study was conducted among a total of 361 women aged≤40 years with basal FSH≤12 U/L undergoing the GnRH-agonist long protocol for COS in a university affiliated IVF center.GGN repeat in the AR gene was analyzed with Sanger sequencing.The primary endpoint was the number of antral follicle counts(AFCs),and the secondary endpoints were stimulation days,total dose of gonadotropin(Gn)used,total number of retrieved oocytes,ovarian sensitivity index,and follicular output rate.Results The GGN repeat in exon 1 of the AR gene ranged from 13 to 24,and the median repeat length was 22.Based on the genotypes(S for GGN repeats<22,L for GGN repeats≥22),the patients were divided into 3 groups:SS,SL,and LL.Generalized regression analysis indicated that the number of AFCs in group SS was significantly lower than those in group SL(adjusted β=1.8,95%CI:0.2-3.4,P=0.024)and group LL(adjusted β=1.5,95%CI:0.2-2.7,P=0.021).No significant difference was observed in the number of AFCs between group SL and group LL(P>0.05).Generalized regression analysis indicated no significant differences in ovarian stimulation parameters among the 3 groups,either before or after adjusting for confounding factors(P>0.05).Conclusion GGN repeat length on the AR gene is associated with AFC but not with ovarian response in Chinese women,indicating that AR gene polymorphisms may affect ovarian reserve.
文摘Petroleum asphalt,an important by-product of the petrochemical industry,has diverse applications but often suffers from low industrial added value.Because of its low cost,high carbon content,and high polycyclic aromatic hydrocarbon content,appropriate modification can increase its value and expand its energy storage applications.Current research progress on the common preparation methods of petroleum asphalt-based carbon materials,including template-assisted pyrolysis,molten salt treatment,activation,heteroatom doping,and pre-oxidation is reviewed,and its use in supercapacitors and alkali metal ion batteries,is also elaborated.Feasible solutions for the current problems with petroleum asphalt are proposed,with the aim of providing insights into its high value-added utilization.
基金Project(52374407)supported by the National Natural Science Foundation of China。
文摘Sulfide solid electrolytes(S-SEs)are widely preferred for their high ionic conductivity and processability.However,the further development of S-SEs is hindered by the excessive price of its critical raw materials of Li_(2)S.Herein,a low-cost and environmentally friendly method is proposed to synthesize Li_(2)S by the carbothermal reduction reaction of Li_(2)SO_(4)in one step,and the effects of various factors are also discussed.As a result,a purity of 99.67%is obtained over the self-prepared Li_(2)S.More importantly,the cost of the self-prepared Li_(2)S is only about 50$/kg,which is significantly lower than that of the commercial counterpart(10000−15000 dollar/kg).Moreover,the ionic conductivity of Li_(5.5)PS_(4.5)Cl_(1.5)prepared using self-prepared Li_(2)S as raw materials is 4.19 mS/cm at room temperature,which is a little higher than that of Li_(5.5)PS_(4.5)Cl_(1.5)using commercial Li_(2)S(4.05 mS/cm).And the all-solid-state lithium batteries(ASSLBs)with the as-prepared electrolytes could maintain a discharge capacity of 109.9 mA·h/g with an average coulombic efficiency(CE)of 98%after 100 cycles at 0.2 C,which is equivalent to that using commercial Li_(2)S,demonstrating that the preparation strategy of Li_(2)S proposed in this work is feasible.
文摘Defect engineering by heteroatom doping gives carbon materials some new characteristics such as a different electronic structure and a high electrochemical activity,making them suitable for high-performance applications.N-doping has been widely investigated because of its similar atom radius to carbon,high electronegativity as well as many different configurations.We summarize the preparation methods and properties of N-doped carbon materials,and discuss their possible use in sodium ion storage.The relationships between N content/configuration and crystallinity,electronic conductivity,wettability,chemical reactivity as well as sodium ion storage performance are discussed.
文摘Exploitation of sustainable energy sources requires the use of unique conversion and storage systems,such as solar panels,batteries,fuel cells,and electronic equipment.Thermal load management of these energy conversion and storage systems is one of their challenges and concerns.In this article,the thermal management of these systems using thermoelectric modules is reviewed.The results show that by choosing the right option to remove heat from the hot side of the thermoelectric modules,it will be a suitable local cooling,and the thermoelectric modules increase the power and lifespan of the system by reducing the spot temperature.Thermoelectric modules were effective in reducing panel temperature.They increase the time to reach a temperature above 50℃ in batteries by 3 to 4 times.Also,in their integration with fuel cells,they increase the power density of the fuel cell.
基金supported by the National Key R&D Program of China(2020YFA0711502)the National Natural Science Foundation of China(52325202,52202052,52373310)。
文摘The preparation of large crystals is highly important for the characterization and application of a newly found structure but remains a challenge for one-dimensional(1D)C_(60) polymers.In this work,we successfully fabricated a 1D C_(60) polymer crystal via on-site annealing of a millimeter-sized C_(60) molecular crystal withα-Li_(3)N at 500°C and ambient pres�sure.Characterizations show that the C_(60) cages in the crystal have been efficiently connected,forming 1D chains along the<110>direction in an orthorhombic 3D structure.At the same time,the crystal maintains a morphology similar to that of the pristine C_(60)crystal,providing opportunities for characterization of all the facets of the crystal via Raman spectroscopy and thus suggesting the formation mechanism of such crystals.
基金Projects(51673214,51673218,61774170)supported by the National Natural Science Foundation of ChinaProject(2017YFA0206600)supported by the National Key Research and Development Program of China。
文摘Perovskite solar cells(PSCs) have emerged as one of the most promising candidates for photovoltaic applications. Low-cost, low-temperature solution processes including coating and printing techniques makes PSCs promising for the greatly potential commercialization due to the scalability and compatibility with large-scale, roll-to-roll manufacturing processes. In this review, we focus on the solution deposition of charge transport layers and perovskite absorption layer in both mesoporous and planar structural PSC devices. Furthermore, the most recent design strategies via solution deposition are presented as well, which have been explored to enlarge the active area, enhance the crystallization and passivate the defects, leading to the performance improvement of PSC devices.
基金Project(51462032)supported by the National Natural Science Foundation of ChinaProject(17JR5RA066)supported by the Foundation for Distinguished Young Scholars of Gansu Province,China
文摘Sb-based materials have been considered one of the most promising anode electrode materials for lithium-ion batteries,whereas they were commonly synthesized through time-consuming and costly processes.Here,Sb@Sb2O3/reduced graphene oxide(Sb@Sb2O3/rGO)composite was successfully synthesized by a facile one-pot chemical method at ambient temperature.Based on the XRD and TGA analysis,the mass fractions of Sb and Sb2O3 in the Sb@Sb2O3/rGO composite are ca.34.05%and 26.6%,respectively.When used as an alternative electrode for lithium ion batteries,a high reversible capacity of 790.9 mA·h/g could be delivered after 200 cycles with the capacity retention of 93.8%at a current density of 200 mA/g.And a capacity of 260 mA·h/g could be maintained even at 2000 mA/g.These excellent electrochemical properties can be attributed to its well-constructed nanostructure.The Sb and Sb2O3 particles with size of 10 nm were tightly anchored on rGO sheets through electronic coupling,which could not only alleviate the stress induced by the volume expansion,suppress the aggregation of Sb and Sb2O3 particles,but also improve the electron transfer ability during cycling.
基金Project(CSTC 2004AA7008) supported by the State I mportant Project of the Science and Technology
文摘Physiological parameters of people and enact assessment standard of indoor thermal environment that are appropriate to our national conditions were explored from the perspective of physiology. From December 2005 to January 2006, nerve conduction velocities and skin temperatures of 20 healthy students were tested with questionnaire investigation. The results show that the nerve conduction velocities as well as skin temperatures present an obvious decline trend in a continuous draught, and that the nerve conduction velocities and skin temperatures have a definite linear relationship. Draught velocity is an important factor in winter that affects body comfort, and the subjects are sensitive to air velocity.
基金Projects(50975252,51275499)supported by the National Natural Science Foundation of ChinaProject(2013CB035404)supported by the National Basic Research Program of ChinaProject(GZKF-201312)supported by Open Foundation of the State Key Laboratory of Fluid Power Transmission and Control,China
文摘A new tamping device which is driven by an electrohydraulic exciter was proposed to overcome the limitations of mechanically driven devices.The double-rod oscillation cylinder drives the tamping arm to realize vibration.A new spin valve was designed in order to fulfill dynamic state requirements of the oscillation cylinder.Parametric analysis was carried out by establishing mathematic model.Then,the relationships among the structure of valve port and the frequency,amplitude,output shock force of the cylinder were researched.An experimental device of the electrohydraulic exciter was established to validate the theoretical results.The signals were acquired by AVANT dynamic signal analyser of vibration.The results show that new tamping device can satisfy all kinds of complex working conditions with the flexible adjustment of frequency and amplitude.
文摘The purpose of this study is to develop an integrated framework for capacity analysis to address the influence of systematic hazardous factors on the haulage fleet nominal capacity.The proposed model was made to capture unexpected risks for mining equipment based upon data-driven method considering different scenarios.Probabilistic risk assessment(PRA)was employed to quantify the loss of production capacity by focusing on severity of failure incidents and maintainability measurements.Discrete-event simulation was configured to characterize the nominal capacity for mining operation.Accordingly,the system capacity was analyzed through the comparison of nominal and actual capacity.A case study was completed to validate the research methodology.The past operation and maintenance field data were collected for shovel operation.The discrete-event simulation was developed to estimate the rate of shovel nominal capacity.Then,the effects of undesirable scenarios were assessed by developing the PRA approach.The research results provide significant insights into how to enhance the production capacity in mines.The analyst gets a well judgment for the crucial elements dealing with high risk levels.A holistic maintenance plan can be developed to mitigate and control the losses.
文摘The solution chemical and optical characteristics of formation of amine-terminated polyamidoamine dendrimer G2.0（NH2-PAMAM G2.0）-Au nanocomposites in the aqueous solution of NH2-PAMAM G2.0 at various mole ratios of Au（Ⅲ） to NH2-PAMAM G2.0 were studied by both UV-visible spectrometry and fluorospectrometry. The NH2-PAMAM G2.0-Au nanocomposites, with a type of structure in which one Au nanoparticle is surrounded by several NH2-PAMAM G2.0 dendrimers, emit strong bluish violet fluorescence, and are uniform, water soluble and biocompatible as well as very stable in frozen conditions. The size of gold nanoparticles in the nanocomposites is about 2.5 nm and decreases with the increase of NH2-PAMAM G2.0 concentration. The NH2-PAMAM G2.0 plays an important role in acting as host or micro-reactor for Au（Ⅲ） before Au（Ⅲ） reduction and acting as dispersant and stabilizer for gold nanoparticles after Au（Ⅲ） reduction. Preliminary experiments of cells staining to human embryonic lung fibroblast cell lines show that the NH2-PAMAM G2.0-Au nanocomposites can be used as optical imaging markers for bioanalyses and medical diagnoses.
文摘Adhesive for bamboo plywood prepared directly using lignin existing in the black liquor as a kind of material replacing phenol was proposed on the basis of the same structural properties of lignin and phenol. The results indicate that the reaction time of black liquor methylating is 30min, when the ratio of alkali to formaldehyde is controlled at approximately 0.20, decomposition rate of formaldehyde is the lowest and the effect of black liquor methylating is the best, the optimal molar ratio of phenol： formaldehyde to NaOH to H2O of preparing phenolic resin is 1.00 ： 1.50 ： 0.50 ： 9.00, and the suitable viscosity is 27 - 30 Pa· s. At different mass ratios of methylated black liquor to phenolic resin, all terms of performance of black liquor phenolic resin are excellent and satisfy the requirement. All terms of performance of bamboo plywood prepared using this technique are hetter than that of excellent bamboo plywood of national criteria. Using this technique, the cost is depressed by 28.69% without altering the traditional adhesive producing technique flow, and without using additional equipment.
