A novel control scheme of active disturbance rejection internal model control(ADRIMC) is proposed to improve the anti-interference ability and robustness for the dead-time process. The active anti-interference concept...A novel control scheme of active disturbance rejection internal model control(ADRIMC) is proposed to improve the anti-interference ability and robustness for the dead-time process. The active anti-interference concept is introduced into the internal model control(IMC) by analyzing the relationship between IMC and disturbance observer control(DOB). Further, a design process of disturbance filter is presented to realize the active anti-interference ability for ADRIMC scheme. The disturbance filter is used to estimate an equivalent disturbance consisting of both external disturbances and internal disturbances caused by model mismatches.Simulation results demonstrate that the proposed method possesses a good disturbance rejection performance, though losing some partial dynamic performance. In other words, the proposed method shows a tradeoff between the dynamic performance and the system robust.展开更多
An adaptive internal mode control is proposed to eliminate effectively periodic disturbance with uncertain frequency caused by input error angle of PIGA （Pendulous Integrating Gyro Accelerometer）. An adaptive algori...An adaptive internal mode control is proposed to eliminate effectively periodic disturbance with uncertain frequency caused by input error angle of PIGA （Pendulous Integrating Gyro Accelerometer）. An adaptive algorithm with periodic disturbance frequency identification on line is applied and the internal model controller parameters are adjusted to eliminate disturbance. Then the convergence of this algorithm and the stability of the system are proved by the averaging method. Simulation results verify the proposed scheme can eliminate periodic disturbance and improve the test precision for PIGA effectively.展开更多
针对高精度交流调速系统,将分数阶微积分理论、内模控制、模糊控制和比例积分微分(proportional integral differential,PID)控制相结合,提出了一种模糊分数阶内模PI-νDa+ν控制器。首先,考虑到分数阶微积分的优良特性,将其引入交流调...针对高精度交流调速系统,将分数阶微积分理论、内模控制、模糊控制和比例积分微分(proportional integral differential,PID)控制相结合,提出了一种模糊分数阶内模PI-νDa+ν控制器。首先,考虑到分数阶微积分的优良特性,将其引入交流调速系统的内模PID控制器中,得到了一种分数阶内模PI-νDa+ν控制器,该控制器包含3个可调参数。然后,通过阶跃响应分析了控制器参数对系统性能的影响,并根据分析结果设计了模糊控制器,实现了控制器参数的智能整定,克服了分数阶控制器参数整定困难的不足。实验结果表明,模糊分数阶内模PI-νDa+ν控制器可以使系统具有良好的动态响应、扰动抑制特性和克服参数摄动的鲁棒性。展开更多
The motivation of this work is to obtain single PI/PID tuning formula for different types of processes with enhanced disturbance rejection performance. The proposed tuning formula consistently gives better performance...The motivation of this work is to obtain single PI/PID tuning formula for different types of processes with enhanced disturbance rejection performance. The proposed tuning formula consistently gives better performance in comparison to several well-known methods at the same degree of robustness for stable, integrating and unstable processes. For the selection of the closed-loop time constant(τc), a guideline is provided over a broad range of time-delay/time-constant ratios on the basis of the peak of maximum sensitivity(Ms). An analysis has been performed for the uncertainty margin with the different process parameters for the robust controller design. It gives the guideline of the Ms-value settings for the PI controller designs based on the process parameters uncertainty. Furthermore, a relationship has been developed between Ms-value and uncertainty margin with the different process parameters(k, τ and θ). Simulation study has been conducted for the broad class of processes and the controllers are tuned to have the same degree of robustness by measuring the maximum sensitivity, Ms, in order to obtain a reasonable comparison.展开更多
An IMC-PID controller was proposed for unstable second-order time delay system which shows the characteristics of inverse response(RHP zero). A plot of Ms versus λ was suggested to calculate the suitable tuning param...An IMC-PID controller was proposed for unstable second-order time delay system which shows the characteristics of inverse response(RHP zero). A plot of Ms versus λ was suggested to calculate the suitable tuning parameter λ, which provides a trade-off between performance and robustness. Six different forms of process models were selected from literature to show the applicability of the present method. Performance of controller was calculated by ITAE and total variation TV and compared with recently published tuning rules. Undesirable overshoot was removed by using a set-point weighting parameter. Robustness was tested by introducing a perturbation into the various model parameters and closed-loop results show that the designed controller is robust in the case of model uncertainty. The proposed method shows an overall better closed-loop response as compared to other recently reported methods.展开更多
A new consistency control method for jet dispensing is proposed. First, the working parameters, namely, viscosity, supply pressure and supply time, are experimentally investigated. Then, the glue viscosity is approxim...A new consistency control method for jet dispensing is proposed. First, the working parameters, namely, viscosity, supply pressure and supply time, are experimentally investigated. Then, the glue viscosity is approximated by a polynomial model using the least square method. Based on this model and temperatme control implemented using the Dahlin principle, the viscosity of the glue can be maintained at a constant value. Then, the viscosity model of the glue is applied to deriving the droplet mass as the nominal model of the temperature controller. The robustness of the temperature controller is analyzed by applying the small gain theory. The glue supply pressure controller is designed using the consistency control strategy, and the robustness is analyzed. Finall）, simulations and experiments are conducted using a jet dispensing control system. The results show that the proposed control strategy can significantly improve the droplet consistency.展开更多
In this paper, we shall summarize a new approach to robust and fault tolerant control proposed recently by the author. This approach is based on a variation of all controller parametrization. This robust and fault-tol...In this paper, we shall summarize a new approach to robust and fault tolerant control proposed recently by the author. This approach is based on a variation of all controller parametrization. This robust and fault-tolerant control design consists of two parts: a nominal performance controller and a robustness controller, and works in such a way that when a component (sensor,actuator, etc.) failure is detected, the controller structure is reconfigured by adding a robustness loop to compensate the fault. We shall illustrate how this strategy works under various situations.展开更多
基金Project(61273132)supported by the National Natural Foundation of ChinaProject(20110010010)supported by Higher School Specialized Research Fund for the Doctoral Program,China
文摘A novel control scheme of active disturbance rejection internal model control(ADRIMC) is proposed to improve the anti-interference ability and robustness for the dead-time process. The active anti-interference concept is introduced into the internal model control(IMC) by analyzing the relationship between IMC and disturbance observer control(DOB). Further, a design process of disturbance filter is presented to realize the active anti-interference ability for ADRIMC scheme. The disturbance filter is used to estimate an equivalent disturbance consisting of both external disturbances and internal disturbances caused by model mismatches.Simulation results demonstrate that the proposed method possesses a good disturbance rejection performance, though losing some partial dynamic performance. In other words, the proposed method shows a tradeoff between the dynamic performance and the system robust.
文摘An adaptive internal mode control is proposed to eliminate effectively periodic disturbance with uncertain frequency caused by input error angle of PIGA （Pendulous Integrating Gyro Accelerometer）. An adaptive algorithm with periodic disturbance frequency identification on line is applied and the internal model controller parameters are adjusted to eliminate disturbance. Then the convergence of this algorithm and the stability of the system are proved by the averaging method. Simulation results verify the proposed scheme can eliminate periodic disturbance and improve the test precision for PIGA effectively.
文摘针对高精度交流调速系统,将分数阶微积分理论、内模控制、模糊控制和比例积分微分(proportional integral differential,PID)控制相结合,提出了一种模糊分数阶内模PI-νDa+ν控制器。首先,考虑到分数阶微积分的优良特性,将其引入交流调速系统的内模PID控制器中,得到了一种分数阶内模PI-νDa+ν控制器,该控制器包含3个可调参数。然后,通过阶跃响应分析了控制器参数对系统性能的影响,并根据分析结果设计了模糊控制器,实现了控制器参数的智能整定,克服了分数阶控制器参数整定困难的不足。实验结果表明,模糊分数阶内模PI-νDa+ν控制器可以使系统具有良好的动态响应、扰动抑制特性和克服参数摄动的鲁棒性。
基金the support provided by King Abdulaziz City for Science and Technology (KACST) through the "KACST Annual Program" at King Fahd University of Petroleum & Minerals (KFUPM) for funding this work through project number AT-32-41
文摘The motivation of this work is to obtain single PI/PID tuning formula for different types of processes with enhanced disturbance rejection performance. The proposed tuning formula consistently gives better performance in comparison to several well-known methods at the same degree of robustness for stable, integrating and unstable processes. For the selection of the closed-loop time constant(τc), a guideline is provided over a broad range of time-delay/time-constant ratios on the basis of the peak of maximum sensitivity(Ms). An analysis has been performed for the uncertainty margin with the different process parameters for the robust controller design. It gives the guideline of the Ms-value settings for the PI controller designs based on the process parameters uncertainty. Furthermore, a relationship has been developed between Ms-value and uncertainty margin with the different process parameters(k, τ and θ). Simulation study has been conducted for the broad class of processes and the controllers are tuned to have the same degree of robustness by measuring the maximum sensitivity, Ms, in order to obtain a reasonable comparison.
基金India (MHRD, India) for providing financial support
文摘An IMC-PID controller was proposed for unstable second-order time delay system which shows the characteristics of inverse response(RHP zero). A plot of Ms versus λ was suggested to calculate the suitable tuning parameter λ, which provides a trade-off between performance and robustness. Six different forms of process models were selected from literature to show the applicability of the present method. Performance of controller was calculated by ITAE and total variation TV and compared with recently published tuning rules. Undesirable overshoot was removed by using a set-point weighting parameter. Robustness was tested by introducing a perturbation into the various model parameters and closed-loop results show that the designed controller is robust in the case of model uncertainty. The proposed method shows an overall better closed-loop response as compared to other recently reported methods.
基金Project(2011CB013104)supported by the National Basic Research Program of China
文摘A new consistency control method for jet dispensing is proposed. First, the working parameters, namely, viscosity, supply pressure and supply time, are experimentally investigated. Then, the glue viscosity is approximated by a polynomial model using the least square method. Based on this model and temperatme control implemented using the Dahlin principle, the viscosity of the glue can be maintained at a constant value. Then, the viscosity model of the glue is applied to deriving the droplet mass as the nominal model of the temperature controller. The robustness of the temperature controller is analyzed by applying the small gain theory. The glue supply pressure controller is designed using the consistency control strategy, and the robustness is analyzed. Finall）, simulations and experiments are conducted using a jet dispensing control system. The results show that the proposed control strategy can significantly improve the droplet consistency.
基金Supported in part by grants from NASA and the Louisiana Board of Regents
文摘In this paper, we shall summarize a new approach to robust and fault tolerant control proposed recently by the author. This approach is based on a variation of all controller parametrization. This robust and fault-tolerant control design consists of two parts: a nominal performance controller and a robustness controller, and works in such a way that when a component (sensor,actuator, etc.) failure is detected, the controller structure is reconfigured by adding a robustness loop to compensate the fault. We shall illustrate how this strategy works under various situations.
