In the present investigation an effort has been made to understand the thermal decomposition and burn rate characteristics of AP as oxidizer and PVC and HTPB as fuel binder in composite solid propellant. The burning r...In the present investigation an effort has been made to understand the thermal decomposition and burn rate characteristics of AP as oxidizer and PVC and HTPB as fuel binder in composite solid propellant. The burning rate study has been carried out at ambient and different pressures of 2.068 Mpa, 4.760 Mpa,6.895 Mpa. The mechanism of thermal decomposition of each composition have also been determined by NETZSCH simultaneous thermal analyser, comprising differential scanning calorimeter(DSC) and thermo-gravimetric analyser(TGA). An effort has been made to study the burn rate and decomposition of fuel binder and oxidizer in presence of Fe_2O_3 and also their overall impact on combustion of propellant.展开更多
A kind of phase change material(PCM)-based nanocomposite was prepared and added into high energy propellants containing RDX as additives to investigate its effect on thermal decomposition and burning characteristic of...A kind of phase change material(PCM)-based nanocomposite was prepared and added into high energy propellants containing RDX as additives to investigate its effect on thermal decomposition and burning characteristic of high energy propellants.The effect of PCM-based nanocomposites on thermal decomposition of high energy propellants is investigated by TG/DSC-FTIR-MS technology.Due to the delayed protection effect(PCM-based nanocomposites can absorb lots of heat at the range of certain temperature when it undergoes structure change or phase transitions)of PCM-based nanocomposites under the thermal decomposition condition,the thermal stability of high energy propellants modified with PCMbased nanocomposites is improved.At the same time,the concentration of N2,NO2,H2O and CO_(2)is increased during thermal decomposition of high energy propellants whereas NO and CO is decreased.The burning gaseous products and burning characteristic of high energy propellants are studied by the combination of closed bomb test and Fourier transform infrared spectrum.The main burning gaseous products are N2,CO_(2),CO,H2O,CH4,etc.After the high energy propellant modified with PCM-based nanocomposites,the concentration of CH4is increased while CO,CO_(2) and H2O is decreased under the high-pressure burning condition.The progressivity factor of high energy propellants is increased by22.2%compared with the control sample while the maximum pressure is merely decreased 1.25%after the addition of the PCM-based nanocomposite,thus PCM-based nanocomposites can be used to adjust the burning process and improve the burning progressivity of high energy propellants.This study is expected to boost the practical application of PCM-based nanocomposite to the propellant formulation and effectively control the burning characteristic of high energy propellants.展开更多
Nano-catalysts containing copper–cobalt oxides(Cu–Co–O) have been synthesized by the citric acid(CA) complexing method. Copper(II) nitrate and Cobalt(II) nitrate were employed in different molar ratios as the start...Nano-catalysts containing copper–cobalt oxides(Cu–Co–O) have been synthesized by the citric acid(CA) complexing method. Copper(II) nitrate and Cobalt(II) nitrate were employed in different molar ratios as the starting reactants to prepare three types of nano-catalysts. Well crystalline nano-catalysts were produced after a period of 3 hours by the calcination of CA–Cu–Co–O precursors at 550 °C. The phase morphologies and crystal composition of synthesized nano-catalysts were examined using Scanning Electron Microscope(SEM), Energy Dispersive Spectroscopy(EDS) and Fourier Transform Infrared Spectroscopy(FTIR) methods. The particle size of nano-catalysts was observed in the range of 90 nm–200 nm. The prepared nano-catalysts were used to formulate propellant samples of various compositions which showed high reactivity toward the combustion of HTPB/AP-based composite solid propellants. The catalytic effects on the decomposition of propellant samples were found to be significant at higher temperatures. The combustion characteristics of composite solid propellants were significantly improved by the incorporation of nano-catalysts. Out of the three catalysts studied in the present work, Cu Co-I was found to be the better catalyst in regard to thermal decomposition and burning nature of composite solid propellants. The improved performance of composite solid propellant can be attributed to the high crystallinity, low agglomeration and lowering the decomposition temperature of oxidizer by the addition of Cu Co-I nano-catalyst.展开更多
Preparation of cast double-propellant grains depends on the ability of nitrocellulose powder to swell and coalesce into a coherent mass when treated with a suitable solvent.The cast double-base process has been develo...Preparation of cast double-propellant grains depends on the ability of nitrocellulose powder to swell and coalesce into a coherent mass when treated with a suitable solvent.The cast double-base process has been developed into a highly versatile technique for manufacturing solid rocket charges.Propellants manufactured by this process provide a wide range of energies and burning rates.Successful preparation of cast double-base propellant grains has been performed using compatible casting liquid with the casting powder.BuNENA was used as an energetic plasticizer for manufacturing of casting powder.Burning rate measurements have been performed using closed bomb SV-2to investigate the burning behavior along a wide range of operating pressure.Plateau burning had been detected in pressure range(50-70)×105 Pa for the composition included BuNENA.DTA and TGA thermal analysis were conducted to evaluate the thermal behavior of the prepared cast double-base propellants.Results from DTA were used to calculate the apparent activation energy.展开更多
文摘In the present investigation an effort has been made to understand the thermal decomposition and burn rate characteristics of AP as oxidizer and PVC and HTPB as fuel binder in composite solid propellant. The burning rate study has been carried out at ambient and different pressures of 2.068 Mpa, 4.760 Mpa,6.895 Mpa. The mechanism of thermal decomposition of each composition have also been determined by NETZSCH simultaneous thermal analyser, comprising differential scanning calorimeter(DSC) and thermo-gravimetric analyser(TGA). An effort has been made to study the burn rate and decomposition of fuel binder and oxidizer in presence of Fe_2O_3 and also their overall impact on combustion of propellant.
基金the National Natural Science Foundation of China(Grant No.22075146)to provide fund for conducting experiments。
文摘A kind of phase change material(PCM)-based nanocomposite was prepared and added into high energy propellants containing RDX as additives to investigate its effect on thermal decomposition and burning characteristic of high energy propellants.The effect of PCM-based nanocomposites on thermal decomposition of high energy propellants is investigated by TG/DSC-FTIR-MS technology.Due to the delayed protection effect(PCM-based nanocomposites can absorb lots of heat at the range of certain temperature when it undergoes structure change or phase transitions)of PCM-based nanocomposites under the thermal decomposition condition,the thermal stability of high energy propellants modified with PCMbased nanocomposites is improved.At the same time,the concentration of N2,NO2,H2O and CO_(2)is increased during thermal decomposition of high energy propellants whereas NO and CO is decreased.The burning gaseous products and burning characteristic of high energy propellants are studied by the combination of closed bomb test and Fourier transform infrared spectrum.The main burning gaseous products are N2,CO_(2),CO,H2O,CH4,etc.After the high energy propellant modified with PCM-based nanocomposites,the concentration of CH4is increased while CO,CO_(2) and H2O is decreased under the high-pressure burning condition.The progressivity factor of high energy propellants is increased by22.2%compared with the control sample while the maximum pressure is merely decreased 1.25%after the addition of the PCM-based nanocomposite,thus PCM-based nanocomposites can be used to adjust the burning process and improve the burning progressivity of high energy propellants.This study is expected to boost the practical application of PCM-based nanocomposite to the propellant formulation and effectively control the burning characteristic of high energy propellants.
文摘Nano-catalysts containing copper–cobalt oxides(Cu–Co–O) have been synthesized by the citric acid(CA) complexing method. Copper(II) nitrate and Cobalt(II) nitrate were employed in different molar ratios as the starting reactants to prepare three types of nano-catalysts. Well crystalline nano-catalysts were produced after a period of 3 hours by the calcination of CA–Cu–Co–O precursors at 550 °C. The phase morphologies and crystal composition of synthesized nano-catalysts were examined using Scanning Electron Microscope(SEM), Energy Dispersive Spectroscopy(EDS) and Fourier Transform Infrared Spectroscopy(FTIR) methods. The particle size of nano-catalysts was observed in the range of 90 nm–200 nm. The prepared nano-catalysts were used to formulate propellant samples of various compositions which showed high reactivity toward the combustion of HTPB/AP-based composite solid propellants. The catalytic effects on the decomposition of propellant samples were found to be significant at higher temperatures. The combustion characteristics of composite solid propellants were significantly improved by the incorporation of nano-catalysts. Out of the three catalysts studied in the present work, Cu Co-I was found to be the better catalyst in regard to thermal decomposition and burning nature of composite solid propellants. The improved performance of composite solid propellant can be attributed to the high crystallinity, low agglomeration and lowering the decomposition temperature of oxidizer by the addition of Cu Co-I nano-catalyst.
文摘Preparation of cast double-propellant grains depends on the ability of nitrocellulose powder to swell and coalesce into a coherent mass when treated with a suitable solvent.The cast double-base process has been developed into a highly versatile technique for manufacturing solid rocket charges.Propellants manufactured by this process provide a wide range of energies and burning rates.Successful preparation of cast double-base propellant grains has been performed using compatible casting liquid with the casting powder.BuNENA was used as an energetic plasticizer for manufacturing of casting powder.Burning rate measurements have been performed using closed bomb SV-2to investigate the burning behavior along a wide range of operating pressure.Plateau burning had been detected in pressure range(50-70)×105 Pa for the composition included BuNENA.DTA and TGA thermal analysis were conducted to evaluate the thermal behavior of the prepared cast double-base propellants.Results from DTA were used to calculate the apparent activation energy.
