When the proton exchange membrane fuel cell(PEMFC)system is running,there will be a condition that does not require power output for a short time.In order to achieve zero power output under low power consumption,it is...When the proton exchange membrane fuel cell(PEMFC)system is running,there will be a condition that does not require power output for a short time.In order to achieve zero power output under low power consumption,it is necessary to consider the diversity of control targets and the complexity of dynamic models,which brings the challenge of high-precision tracking control of the stack output power and cathode intake flow.For system idle speed control,a modelbased nonlinear control framework is constructed in this paper.Firstly,the nonlinear dynamic model of output power and cathode intake flow is derived.Secondly,a control scheme combining nonlinear extended Kalman filter observer and state feedback controller is designed.Finally,the control scheme is verified on the PEMFC experimental platform and compared with the proportion-integration-differentiation(PID)controller.The experimental results show that the control strategy proposed in this paper can realize the idle speed control of the fuel cell system and achieve the purpose of zero power output.Compared with PID controller,it has faster response speed and better system dynamics.展开更多
The traffic performance of urban expressway is subject to non-recurring and recurring events, which may cause heavy congestion and vehicles long queuing on ramps. The low performance may bring more traffic delay to th...The traffic performance of urban expressway is subject to non-recurring and recurring events, which may cause heavy congestion and vehicles long queuing on ramps. The low performance may bring more traffic delay to the whole network of urban road. This paper presents a new method, the joint control of variable speed control and on-ramp metering, which attempts to improve the level of traffic operations on urban expressway. By analyzing traffic flow on urban expressway, an optimum control strategy of variable speed and on-ramp metering is established in the paper.展开更多
The efficient manufacture technique involves a high-speed control of platform mobile system. A linear acutor is presented in this paper. The linear acutor is constructed as a linear stepper motor. However, to sustain ...The efficient manufacture technique involves a high-speed control of platform mobile system. A linear acutor is presented in this paper. The linear acutor is constructed as a linear stepper motor. However, to sustain both high accuracy and high speed for the position and speed control, A single-stack computer system is constructed and a special control algorithm is prescribed to controled the linear actuator continuously. In this paper, the nonlinear errors resulted from the magnetic saturation and the hysteresis is anaysis and discussed. In the view of electromagnetic propotional control, the actuator is a stage proportional magnet, because the driving current to the linear acuator changes for a number of cycles and a series of reset points will occur as the current undergoes cyclic changes. At each reset point the original starting characteristics of the system are re-established. A large number of reset points across the full stroke of the platform results in a significant reduction in the nonlinear behavior. The stage control is first discussed. Experiments carried out to obtain the characteristics of the mobile platform control system. It is demonstrated that with the introduction of stage control, nonlinearities, such as saturation and hysteresis, are greatly reduced, system stiffness is increased, and the positioning accuracy and resolution are improved. The effect of dither due to a "digital fragment" signal is also examined and found to be crucial in reducing the hysteresis and in improving the resolution accuracy.展开更多
Previous studies have confirmed that an active suspension system with high speed ON/OFF solenoid valves could provide the same vibration isolation efficiency as that of system with pressure proportional valve. In this...Previous studies have confirmed that an active suspension system with high speed ON/OFF solenoid valves could provide the same vibration isolation efficiency as that of system with pressure proportional valve. In this study, by using Linear-quadratic optimization technique and Kalman filter method, an optimal regulator controller with a state observer was designed for the proposed system. Simulation and experimental research was conducted on a quarter car model. The simulation analysis of the system frequency characteristic suggested that the peak value of magnitude response curve in the case of system with an optimal controller would be lowered significantly, and the experiment results also showed that an improvement in the vibration isolation effect was obtained in using the designed optimal controller over the sky hook damper controller.展开更多
单边短初级长次级直线感应电机己普遍应用于低速磁悬浮的驱动系统。由于在动态纵向边端效应影响下等效电路不对称，单边直线感应电机（single-sided linear inductionmotor，SLIM）的一些参数非线性变化。传统的应用于旋转电机的无速度...单边短初级长次级直线感应电机己普遍应用于低速磁悬浮的驱动系统。由于在动态纵向边端效应影响下等效电路不对称，单边直线感应电机（single-sided linear inductionmotor，SLIM）的一些参数非线性变化。传统的应用于旋转电机的无速度传感器方法不再适用。首先分析了SLIM的M／T轴等效电路，选择次级磁链作为速度观测器状态变量。根据李雅普诺夫系统稳定性判据，推导出适用于SLIM的无速度传感器辨识；然后，采用反馈广义积分观测器控制稳态辨识速度的双幅脉振幅值；引入虚拟期望变量（virtualdesiredvariable，VDV）法，利用估算速度参与SLIM的恒滑差频率矢量控制。仿真与实验对所提控制算法的有效性和实用性进行了验证，所得结论可为磁悬浮的无速度传感器控制提供参考。展开更多
Methods of the comprehensive evaluation have been studied for many years. However, the change speed of evaluated objects was rarely considered by the existing evaluation methods. An evaluation matrix is proposed to re...Methods of the comprehensive evaluation have been studied for many years. However, the change speed of evaluated objects was rarely considered by the existing evaluation methods. An evaluation matrix is proposed to remedy this deficiency. Firstly, the change speed state （CSS） of the evaluated objects is analyzed based on double inspiriting control lines （DICLs）, and a matrix of the CSS is constructed. Then, 72 elements in the matrix are analyzed, and formulas describing each CSS are given. The efficiency of the proposed evaluation matrix is proved when the CSS merges with the change speed trend （CST） in the dynamic comprehensive evaluation. Finally, a computing example shows that the proposed evaluation matrix is feasible in the dynamic comprehensive evaluation with the speed feature.展开更多
A hydraulic position system was designed employing two high speed On/Off solenoid valves with PWM(Pulse width modulation) technique and using LQ(Linear Quadratic) optimization principle. Based on the system, the parts...A hydraulic position system was designed employing two high speed On/Off solenoid valves with PWM(Pulse width modulation) technique and using LQ(Linear Quadratic) optimization principle. Based on the system, the parts of system can be formulated with equations. According to equations, the mathematical model of the system was established. By simulation, the corresponding LQ optimal controller was designed and the PWM signals were generated. The comparison of the simulation and experiment results show that LQ optimal control method with PWM technique employing high speed On/Off solenoid valve can provide better system performance and a high position precision is obtained.展开更多
基金Supported by the Major Science and Technology Projects in Jilin Province and Changchun City(20220301010GX).
文摘When the proton exchange membrane fuel cell(PEMFC)system is running,there will be a condition that does not require power output for a short time.In order to achieve zero power output under low power consumption,it is necessary to consider the diversity of control targets and the complexity of dynamic models,which brings the challenge of high-precision tracking control of the stack output power and cathode intake flow.For system idle speed control,a modelbased nonlinear control framework is constructed in this paper.Firstly,the nonlinear dynamic model of output power and cathode intake flow is derived.Secondly,a control scheme combining nonlinear extended Kalman filter observer and state feedback controller is designed.Finally,the control scheme is verified on the PEMFC experimental platform and compared with the proportion-integration-differentiation(PID)controller.The experimental results show that the control strategy proposed in this paper can realize the idle speed control of the fuel cell system and achieve the purpose of zero power output.Compared with PID controller,it has faster response speed and better system dynamics.
文摘The traffic performance of urban expressway is subject to non-recurring and recurring events, which may cause heavy congestion and vehicles long queuing on ramps. The low performance may bring more traffic delay to the whole network of urban road. This paper presents a new method, the joint control of variable speed control and on-ramp metering, which attempts to improve the level of traffic operations on urban expressway. By analyzing traffic flow on urban expressway, an optimum control strategy of variable speed and on-ramp metering is established in the paper.
文摘The efficient manufacture technique involves a high-speed control of platform mobile system. A linear acutor is presented in this paper. The linear acutor is constructed as a linear stepper motor. However, to sustain both high accuracy and high speed for the position and speed control, A single-stack computer system is constructed and a special control algorithm is prescribed to controled the linear actuator continuously. In this paper, the nonlinear errors resulted from the magnetic saturation and the hysteresis is anaysis and discussed. In the view of electromagnetic propotional control, the actuator is a stage proportional magnet, because the driving current to the linear acuator changes for a number of cycles and a series of reset points will occur as the current undergoes cyclic changes. At each reset point the original starting characteristics of the system are re-established. A large number of reset points across the full stroke of the platform results in a significant reduction in the nonlinear behavior. The stage control is first discussed. Experiments carried out to obtain the characteristics of the mobile platform control system. It is demonstrated that with the introduction of stage control, nonlinearities, such as saturation and hysteresis, are greatly reduced, system stiffness is increased, and the positioning accuracy and resolution are improved. The effect of dither due to a "digital fragment" signal is also examined and found to be crucial in reducing the hysteresis and in improving the resolution accuracy.
文摘Previous studies have confirmed that an active suspension system with high speed ON/OFF solenoid valves could provide the same vibration isolation efficiency as that of system with pressure proportional valve. In this study, by using Linear-quadratic optimization technique and Kalman filter method, an optimal regulator controller with a state observer was designed for the proposed system. Simulation and experimental research was conducted on a quarter car model. The simulation analysis of the system frequency characteristic suggested that the peak value of magnitude response curve in the case of system with an optimal controller would be lowered significantly, and the experiment results also showed that an improvement in the vibration isolation effect was obtained in using the designed optimal controller over the sky hook damper controller.
文摘单边短初级长次级直线感应电机己普遍应用于低速磁悬浮的驱动系统。由于在动态纵向边端效应影响下等效电路不对称，单边直线感应电机（single-sided linear inductionmotor，SLIM）的一些参数非线性变化。传统的应用于旋转电机的无速度传感器方法不再适用。首先分析了SLIM的M／T轴等效电路，选择次级磁链作为速度观测器状态变量。根据李雅普诺夫系统稳定性判据，推导出适用于SLIM的无速度传感器辨识；然后，采用反馈广义积分观测器控制稳态辨识速度的双幅脉振幅值；引入虚拟期望变量（virtualdesiredvariable，VDV）法，利用估算速度参与SLIM的恒滑差频率矢量控制。仿真与实验对所提控制算法的有效性和实用性进行了验证，所得结论可为磁悬浮的无速度传感器控制提供参考。
基金supported by the National Natural Science Foundation of China (7127217671302028)+1 种基金the Fundamental Scientific Research Funds for the Central Universities (HEUCF110914)the Heilongjiang Postdoctoral Fund (3236310094)
文摘Methods of the comprehensive evaluation have been studied for many years. However, the change speed of evaluated objects was rarely considered by the existing evaluation methods. An evaluation matrix is proposed to remedy this deficiency. Firstly, the change speed state （CSS） of the evaluated objects is analyzed based on double inspiriting control lines （DICLs）, and a matrix of the CSS is constructed. Then, 72 elements in the matrix are analyzed, and formulas describing each CSS are given. The efficiency of the proposed evaluation matrix is proved when the CSS merges with the change speed trend （CST） in the dynamic comprehensive evaluation. Finally, a computing example shows that the proposed evaluation matrix is feasible in the dynamic comprehensive evaluation with the speed feature.
文摘A hydraulic position system was designed employing two high speed On/Off solenoid valves with PWM(Pulse width modulation) technique and using LQ(Linear Quadratic) optimization principle. Based on the system, the parts of system can be formulated with equations. According to equations, the mathematical model of the system was established. By simulation, the corresponding LQ optimal controller was designed and the PWM signals were generated. The comparison of the simulation and experiment results show that LQ optimal control method with PWM technique employing high speed On/Off solenoid valve can provide better system performance and a high position precision is obtained.
