A new concept of banana vibrating screen which has the same effect as traditional banana vibrating screen in a new way was put forward.The dynamic model of vibrating screen was established and its working principle wa...A new concept of banana vibrating screen which has the same effect as traditional banana vibrating screen in a new way was put forward.The dynamic model of vibrating screen was established and its working principle was analyzed when the action line of the exciting force did not act through the centroid of screen box.Moreover,the dynamic differential equations of centroid and screen surface were obtained.The motions of centroid and screen surface were simulated with actual parameters of the design example in Matlab/Simulink.The results show that not only the amplitude has a significant decrease from 9.38 to 4.10 mm,but also the throwing index and vibrating direction angle have a significant decrease from 10.49 to 4.59,and from 58.10° to 33.29°,respectively,along the screen surface,which indicates that motion characteristics of vibrating screen are consistent with those of traditional banana vibrating screen only by means of a single angle of screen surface.What's more,such banana vibrating screen of variable linear trajectory with greater processing capacity could be obtained by adjusting the relative position of force center and the centroid of screen box properly.展开更多
Signals from multi-sensor systems are often mixtures of (statistically) independent sources by unknown mixing method. Blind source separation(BSS) and independent component analysis(ICA) are the methods to ident...Signals from multi-sensor systems are often mixtures of (statistically) independent sources by unknown mixing method. Blind source separation(BSS) and independent component analysis(ICA) are the methods to identify/recover the channels and the sources. BSS/ICA of nonlinear mixing models are difficult problems. For instance, the post-nonlinear model has been studied by several authors. It is noticed that in most cases, the proposed models are always with an invertible mixing. According to this fact there is an interesting question, how about the situation of the non-invertible non-linear mixing in BSS or ICA? A new simple non-linear mixing model is proposed with a kind of non-invertible mixing, the folding mixing, and method to identify its channel, blindly.展开更多
To ensure the accuracy and precision of vibration test,a universal checking method is proposed.The use of the method is discussed and an actual example is given.First,the calibration of the 7703A-500 type sensor is an...To ensure the accuracy and precision of vibration test,a universal checking method is proposed.The use of the method is discussed and an actual example is given.First,the calibration of the 7703A-500 type sensor is analyzed on the basis of frequency response method.The frequency range of normal working can be determined by the exact calibration of sensitivity,frequency response and linearity.For the basic problem of abnormal signals appearing in test system,the method of zero check and loading vibration source are developed.The frequency spectrum of output signals is employed to distinguish the noise signal,unknown source signal and useful signal effectively.Finally,the experimental results reveal the importance to improve the accuracy of the results of practical vibration test.展开更多
Based on the T-S fuzzy model,this paper presents a new model of non-linear network control system with stochastic transfer delay.Sufficient criterion is proposed to guarantee globally asymptotically stability of this ...Based on the T-S fuzzy model,this paper presents a new model of non-linear network control system with stochastic transfer delay.Sufficient criterion is proposed to guarantee globally asymptotically stability of this two-levels T-S fuzzy model.Also a T-S fuzzy observer of NCS is designed base on this two-levels T-S fuzzy model.All these results present a new approach for networked control system analysis and design.展开更多
Three dimensional analysis was performed by regarding vibration isolation performance cast-in-place concrete thin-wall pipe pile (PCC) and using the finite element analysis software ANSYS. The ground vertical amplitud...Three dimensional analysis was performed by regarding vibration isolation performance cast-in-place concrete thin-wall pipe pile (PCC) and using the finite element analysis software ANSYS. The ground vertical amplitude was analyzed behind the single row cast-in-place concrete thin-wall pipe pile after the source vibration, and the influencing factors were also studied. The results indicate that in the one time of wavelength before the barrier, the oscillation amplitude is weakened; meanwhile the range which covers 4 times wavelength behind the barrier has a good vibration isolation effect, when the distance is larger than the barrier latter 4 times wavelength vibration isolation expiration.展开更多
The cascade systems which stabilize the transverse deviation of the ship in relation to the set path is presented. The ship's path is determined as a broken line with specified coordinates of way points. Three con...The cascade systems which stabilize the transverse deviation of the ship in relation to the set path is presented. The ship's path is determined as a broken line with specified coordinates of way points. Three controllers are used in the system. The main primary controller is the trajectory controller. The set value of heading for the course control system or angular velocity for the turning control system is generated. The course control system is used on the straight line of the set trajectory while the turning controller is used during a change of the set trajectory segment. The characteristics of the non-linear controllers are selected in such a way that the properties of the control system with the rate of turn controller are modelled by the first-order inertia, while the system with the course keeping controller is modelled by a second-order linear term. The presented control system is tested in computer simulation. Some results of simulation tests are presented and discussed.展开更多
A fault diagnosis method of bearing based on integration of non-linear geometric invariables was presented for the non-linearity exiting in bearing system but ignored in traditional fault diagnosis.The meanings of non...A fault diagnosis method of bearing based on integration of non-linear geometric invariables was presented for the non-linearity exiting in bearing system but ignored in traditional fault diagnosis.The meanings of non-linear geometric invariables,such as fractal dimension,Lyapunov exponent,Kolmogorov entropy,correlation distance entropy and their calculation method were analyzed.Grey theory is applied to integrate these parameters and the correlation values as fault characteristic value was input into the support vector machines for diagnosis.The experimental results show that this method can distinguish the bearing fault effectively,it provides a new approach for the fault diagnosis of rotating machinery.展开更多
The design problem of non-fragile estimator is addressed for a class of perturbed linear continuous systems. The perturbations occur on the plant and estimator parameters. The estimator designed should force the error...The design problem of non-fragile estimator is addressed for a class of perturbed linear continuous systems. The perturbations occur on the plant and estimator parameters. The estimator designed should force the error system to achieve the desired decay rate and force the steady error variance less than the specified upper bound irrelevancy of the admissible plant perturbations and estimator perturbations. Consistency problem of the decay rate with the variance upper bound is first considered via linear matrix inequality (LMI) approach. The solution of the estimator parameter under specifications to be consistent is then discussed. The consistency condition of specifications and estimator parameter solution are transformed to feasible or minimum problems subject to a set of LMI respectively. The method is illustrated by a numerical example.展开更多
在实际工作过程中,电动挖掘机所承受的载荷往往表现出显著的非平稳随机特性,导致电动挖掘机电池包振动现象十分复杂,从而直接影响电池包的安全、可靠运行。针对这一问题,探究了复杂工况下电动挖掘机所承受的路面激励、柱塞泵压力脉动激...在实际工作过程中,电动挖掘机所承受的载荷往往表现出显著的非平稳随机特性,导致电动挖掘机电池包振动现象十分复杂,从而直接影响电池包的安全、可靠运行。针对这一问题,探究了复杂工况下电动挖掘机所承受的路面激励、柱塞泵压力脉动激励和冲击激励特性,分析了各种激励下的振动传递路径,建立了电动挖掘机电池包的动力学模型,揭示了非平稳随机激励下电池包的振动特性,并通过实例进行了分析和验证。研究表明,基于小波变换及灰狼优化-变分模态分解(Grey Wolf Optimization-Variational Mode Decomposition,GWO-VMD)信号分析算法对路面激励信号进行重构,能够较好地反映路面激励特性;行驶工况下电动挖掘机所承受的路面激励具有显著的非平稳特性;在路面激励等非平稳随机激励作用下,电动挖掘机电池包产生复杂多变的振动,其动态响应的功率谱密度随时间变化显著,具有明显的非平稳随机特性。研究工作为电动挖掘机电池包的安全、可靠运行提供了一定的参考。展开更多
基金Projects(50574091, 50774084) supported by the National Natural Science Foundation of ChinaProject(50921001) supported by the Innovative Research Group Science Foundation,ChinaProject supported by Jiangsu Scientific Researching Fund Project ("333" Project),China
文摘A new concept of banana vibrating screen which has the same effect as traditional banana vibrating screen in a new way was put forward.The dynamic model of vibrating screen was established and its working principle was analyzed when the action line of the exciting force did not act through the centroid of screen box.Moreover,the dynamic differential equations of centroid and screen surface were obtained.The motions of centroid and screen surface were simulated with actual parameters of the design example in Matlab/Simulink.The results show that not only the amplitude has a significant decrease from 9.38 to 4.10 mm,but also the throwing index and vibrating direction angle have a significant decrease from 10.49 to 4.59,and from 58.10° to 33.29°,respectively,along the screen surface,which indicates that motion characteristics of vibrating screen are consistent with those of traditional banana vibrating screen only by means of a single angle of screen surface.What's more,such banana vibrating screen of variable linear trajectory with greater processing capacity could be obtained by adjusting the relative position of force center and the centroid of screen box properly.
基金This project was supported by the Talent Foundation of Anhui Province(2004Z025)
文摘Signals from multi-sensor systems are often mixtures of (statistically) independent sources by unknown mixing method. Blind source separation(BSS) and independent component analysis(ICA) are the methods to identify/recover the channels and the sources. BSS/ICA of nonlinear mixing models are difficult problems. For instance, the post-nonlinear model has been studied by several authors. It is noticed that in most cases, the proposed models are always with an invertible mixing. According to this fact there is an interesting question, how about the situation of the non-invertible non-linear mixing in BSS or ICA? A new simple non-linear mixing model is proposed with a kind of non-invertible mixing, the folding mixing, and method to identify its channel, blindly.
基金Shan Dong Scientific Research Foundation for Excellent Young Scientists(Grant No:BS2011ZZ001)National Natural Science Foundation of China(Grant No.51105172)
文摘To ensure the accuracy and precision of vibration test,a universal checking method is proposed.The use of the method is discussed and an actual example is given.First,the calibration of the 7703A-500 type sensor is analyzed on the basis of frequency response method.The frequency range of normal working can be determined by the exact calibration of sensitivity,frequency response and linearity.For the basic problem of abnormal signals appearing in test system,the method of zero check and loading vibration source are developed.The frequency spectrum of output signals is employed to distinguish the noise signal,unknown source signal and useful signal effectively.Finally,the experimental results reveal the importance to improve the accuracy of the results of practical vibration test.
基金National Natural Science Foundation of china(60274014,60574088)
文摘Based on the T-S fuzzy model,this paper presents a new model of non-linear network control system with stochastic transfer delay.Sufficient criterion is proposed to guarantee globally asymptotically stability of this two-levels T-S fuzzy model.Also a T-S fuzzy observer of NCS is designed base on this two-levels T-S fuzzy model.All these results present a new approach for networked control system analysis and design.
基金Project(50679017) supported by the National Natural Science Foundation of China
文摘Three dimensional analysis was performed by regarding vibration isolation performance cast-in-place concrete thin-wall pipe pile (PCC) and using the finite element analysis software ANSYS. The ground vertical amplitude was analyzed behind the single row cast-in-place concrete thin-wall pipe pile after the source vibration, and the influencing factors were also studied. The results indicate that in the one time of wavelength before the barrier, the oscillation amplitude is weakened; meanwhile the range which covers 4 times wavelength behind the barrier has a good vibration isolation effect, when the distance is larger than the barrier latter 4 times wavelength vibration isolation expiration.
文摘The cascade systems which stabilize the transverse deviation of the ship in relation to the set path is presented. The ship's path is determined as a broken line with specified coordinates of way points. Three controllers are used in the system. The main primary controller is the trajectory controller. The set value of heading for the course control system or angular velocity for the turning control system is generated. The course control system is used on the straight line of the set trajectory while the turning controller is used during a change of the set trajectory segment. The characteristics of the non-linear controllers are selected in such a way that the properties of the control system with the rate of turn controller are modelled by the first-order inertia, while the system with the course keeping controller is modelled by a second-order linear term. The presented control system is tested in computer simulation. Some results of simulation tests are presented and discussed.
文摘A fault diagnosis method of bearing based on integration of non-linear geometric invariables was presented for the non-linearity exiting in bearing system but ignored in traditional fault diagnosis.The meanings of non-linear geometric invariables,such as fractal dimension,Lyapunov exponent,Kolmogorov entropy,correlation distance entropy and their calculation method were analyzed.Grey theory is applied to integrate these parameters and the correlation values as fault characteristic value was input into the support vector machines for diagnosis.The experimental results show that this method can distinguish the bearing fault effectively,it provides a new approach for the fault diagnosis of rotating machinery.
文摘The design problem of non-fragile estimator is addressed for a class of perturbed linear continuous systems. The perturbations occur on the plant and estimator parameters. The estimator designed should force the error system to achieve the desired decay rate and force the steady error variance less than the specified upper bound irrelevancy of the admissible plant perturbations and estimator perturbations. Consistency problem of the decay rate with the variance upper bound is first considered via linear matrix inequality (LMI) approach. The solution of the estimator parameter under specifications to be consistent is then discussed. The consistency condition of specifications and estimator parameter solution are transformed to feasible or minimum problems subject to a set of LMI respectively. The method is illustrated by a numerical example.
文摘在实际工作过程中,电动挖掘机所承受的载荷往往表现出显著的非平稳随机特性,导致电动挖掘机电池包振动现象十分复杂,从而直接影响电池包的安全、可靠运行。针对这一问题,探究了复杂工况下电动挖掘机所承受的路面激励、柱塞泵压力脉动激励和冲击激励特性,分析了各种激励下的振动传递路径,建立了电动挖掘机电池包的动力学模型,揭示了非平稳随机激励下电池包的振动特性,并通过实例进行了分析和验证。研究表明,基于小波变换及灰狼优化-变分模态分解(Grey Wolf Optimization-Variational Mode Decomposition,GWO-VMD)信号分析算法对路面激励信号进行重构,能够较好地反映路面激励特性;行驶工况下电动挖掘机所承受的路面激励具有显著的非平稳特性;在路面激励等非平稳随机激励作用下,电动挖掘机电池包产生复杂多变的振动,其动态响应的功率谱密度随时间变化显著,具有明显的非平稳随机特性。研究工作为电动挖掘机电池包的安全、可靠运行提供了一定的参考。