Lithium-sulfur(Li-S)batteries have great promise for next-generation energy storage devices due to the high theoretical specific capacity(1675 mAh g^(-1))of sulfur with chemical conversion for charge storage.However,t...Lithium-sulfur(Li-S)batteries have great promise for next-generation energy storage devices due to the high theoretical specific capacity(1675 mAh g^(-1))of sulfur with chemical conversion for charge storage.However,their practical use is hindered by the slow redox kinetics of sulfur and the“shuttle effect”arising from dissolved lithium polysulfides(LiPSs).In recent years,various carbon-based materials have served as sulfur hosts and catalysts for accelerating sulfur conversion redox kinetics and alleviating LiPS shuttling.However,they often suffer from irreversible passivation and structural changes that destroy their long-term performance.We consider the main problems limiting their stability,including excessive LiPS adsorption,passivation by insulating Li2S,and surface reconstruction,and clarify how these factors lead to capacity fade.We then outline effective strategies for achieving long-term sulfur catalysis,focusing on functional carbon,such as designing suitable carbon-supported catalyst interfaces,creating well-distributed active sites,adding cocatalysts to improve electron transfer,and using carbon-based protective layers to suppress unwanted side reactions.Using this information should enable the development of stable,high-activity catalysts capable of long-term operation under practical conditions in Li-S batteries.展开更多
The catalytic proficiency of three MONs for AP thermal decomposition was studied in this work.A chemical co-precipitation method was used for synthesis of MONs(CuZnO,CoZnO,and NiZnO)and their characterization carried ...The catalytic proficiency of three MONs for AP thermal decomposition was studied in this work.A chemical co-precipitation method was used for synthesis of MONs(CuZnO,CoZnO,and NiZnO)and their characterization carried out by utilizing XRD,FTIR,and SEM.The TGA/DSC technique was employed for the investigation of the catalytic proficiency of MONs on the AP.The DSC data were used for measuring activation energy of catalyzed AP by using Ozawa,Kissinger,and Starink method.The MONs were much sensitive for AP decomposition,and the performance of AP decomposition was further improved.Among all the MONs,the CuZnO exhibits higher catalytic action than others and decomposition temperature of AP is descending around 117℃ by CuZnO.The reduction in the activation energy was noticed after the incorporation of MONs in AP.展开更多
A novel heterogeneous catalytic ozonation process in water treatment was studied, with a copper-loaded activated carbon （Cu/AC） that was prepared by an incipient wetness impregnation method at low temperature and te...A novel heterogeneous catalytic ozonation process in water treatment was studied, with a copper-loaded activated carbon （Cu/AC） that was prepared by an incipient wetness impregnation method at low temperature and tested as a catalyst in the ozonation of phenol and oxalic acid. Cu/AC was characterized using XRD, BET and SEM techniques. Compared with ozonation alone, the presence of Cu/AC in the ozonation processes significantly improves the degradation of phenol or oxalic acid. With the introduction of the hydroxyl radical scavenger, i.e., turt-butanol alcohol （t-BuOH）, the degradation efficiency of both phenol and oxalic acid in the Cu/AC catalyzed ozonation process decreases by 22% at 30 min. This indicates that Cu/AC accelerates ozone decomposition into certain concentration of hydroxyl radicals. The amount of Cu（II ） produced during the reaction of Cu/AC-catalyzed ozonation of phenol or oxalic acid is very small, which shows that the two processes are both heterogeneous catalytic ozonation reactions.展开更多
Chemical warfare agents(CWAs)are extremely lethal substances used in warfare and terrorism,capable of causing permanent damage even in small doses,despite medical intervention.Therefore,detection,protection,and detoxi...Chemical warfare agents(CWAs)are extremely lethal substances used in warfare and terrorism,capable of causing permanent damage even in small doses,despite medical intervention.Therefore,detection,protection,and detoxification of CWAs are vital for the safety of first responders,military personnel,and civilians,driving significant research in this area.Herein,we designed and synthesized a poly(-diallyldimethylammonium chloride)(PDDA)mediated cupric oxide(CuO)functionalized activated carbon fabric(ACF),termed ACF@PDDA-CuO,as an adsorbent filter material for self-detoxifying chemical protective clothing.PDDA,a positively charged polyelectrolyte,effectively binds in-situ synthesized CuO to the negatively charged ACF surface,serving as a suitable binder.This study demonstrates the synergistic effects of PDDA-CuO functionalization on ACF,where PDDA treatment enhanced mechanical and comfort properties,and CuO crystal growth significantly improved detoxification efficacy against the CWA Nerve Agent Sarin.Comprehensive analyses,including FTIR,BET surface area analysis,SEM,EDS,TEM,STEM,TGA,XPS,and XRD,confirmed the uniform deposition of CuO and PDDA on the ACF surface.The Cu content on ACF@PDDA-CuO samples was measured via iodometric titration.The materials were evaluated for tensile strength,air permeability,water vapor permeability,nerve agent(Sarin)detoxification,and blister agent(Sulfur Mustard)breakthrough time to assess their applicability for protective clothing.The optimized PDDA-CuO on ACF detoxified 82.04%of Sarin within 18 h,compared to 25.22%by ACF alone,and enhanced tensile strength by 23.67%,air permeability by 24.63%,and water vapor permeability by 3.94%,while maintaining protection against Sulfur Mustard for 24 h.These findings indicate that ACF@PDDA-CuO is a promising candidate for CWA protective clothing,offering robust protection with enhanced comfort.展开更多
Nd-Co 3O 4 catalysts were prepared by hydrothermal and co-precipitation methods to catalyze the decomposition of N 2O. The catalysts prepared by hydrothermal method showed higher activity. Among the hydrothermal Nd-Co...Nd-Co 3O 4 catalysts were prepared by hydrothermal and co-precipitation methods to catalyze the decomposition of N 2O. The catalysts prepared by hydrothermal method showed higher activity. Among the hydrothermal Nd-Co 3O 4 catalysts, the catalyst with Nd/Co molar ratio of 0.01 had higher activity. 0.01Nd-Co 3O 4 catalyst was then impregnated by K 2CO 3 solution to prepare K-modified catalyst. The catalysts were characterized by means of X-ray diffraction (XRD), nitrogen physisorption, scanning electrons microscopy (SEM), X-ray photoelectron spectroscopy (XPS), hydrogen temperature-programmed reduction (H 2-TPR), and oxygen temperature-programmed desorption (O 2-TPD). The results show that Nd-Co 3O 4 and K-modified catalysts exhibit spinel structure. In contrast to bare Nd-Co 3O 4, the K-modified catalyst with higher activity is due to its weaker strength of Co-O bond and easier desorption of surface oxygen species. In addition, over 90% conversion of N 2O can be reached over 0.02K/0.01Nd-Co 3O 4 at 350 ℃ for 40 h under the co-presence of oxygen and steam in feed gases.展开更多
This paper presents the catalytic effects of Cu-Co~* catalyst on the decomposition of AN and AN/KDN based oxidizer and propellant samples. Ozawa-Flynn-Wall(OFW) iso-conversional method was used for the kinetic studies...This paper presents the catalytic effects of Cu-Co~* catalyst on the decomposition of AN and AN/KDN based oxidizer and propellant samples. Ozawa-Flynn-Wall(OFW) iso-conversional method was used for the kinetic studies and to compute the activation energy(Ea) values for various decomposition steps of the prepared oxidizer and propellant samples in the temperature range of 50 e500C. TG-DTG experiments were carried out for both oxidizer and propellant samples at the heating rates of 3, 5, and 10C/min. AN/KDN based oxidizer samples were prepared by an evaporative co-crystallization method. Citric acid sol-gel method was used for the synthesis of Cu-Co~* catalyst. The propellant sample contains HTPB as the fuel binder along with other ingredients such as TDI, DOA, and Glycerol. The Cu-Co~* catalyst was used as 2% by weight to the total weight of catalyzed oxidizer and propellant samples. It was observed from the present study that, Cu-Co~* catalyst helps in reducing the Ea values for AN and AN based propellant samples. However, with the percentage increment of KDN in the AN crystals, Ea value increases.Further, it was observed that Cu-Co~* catalyst stabilizes the initial partial decomposition of KDN.展开更多
The purpose of this work is to synthesize the catalytic systems containing palladium nanoparticles and using hydroxycarbonates of yttrium and cerium as supports,and to test the catalytic activity of the obtained catal...The purpose of this work is to synthesize the catalytic systems containing palladium nanoparticles and using hydroxycarbonates of yttrium and cerium as supports,and to test the catalytic activity of the obtained catalysts in the Suzuki cross-couping reaction.Nanocomposites Pd/Y(OH)CO 3 and Pd/Ce(OH)CO 3 were synthesized according to two methods:the first one-simultaneous production of nanoscale substrate and immobilization of palladium nanoparticles on its surface(nanocomposites 1),the second one-the prior synthesis of polyvinylpyrrolidone stabilized palladium nanoparticles followed by their immobilization on the nano sized substrate surface(nanocomposites 2).The reaction between phenylboronic acid and iodobenzene is chosen as a model one.The dependence of the catalytic activity of catalysts on the method of their synthesis was established.It was established that nanocomposites 2 exhibit higher catalytic activity in the selected reaction compared to the nanocomposites 1.The TOF values for the nanocomposites 1 are 6663～14617 h 1 when using the substrate Ce(OH)CO 3 and 13774～27084 h 1 when using the substrate Y(OH)CO 3,while the nanocomposites 2 reveal TOF = 87287 h 1 for the substrate Ce(OH)CO 3 and TOF = 97746 h 1 for the substrate Y(OH)CO 3 under other equal conditions.In addition,nanocomposites 2 "work" at room temperature giving a high yield of the desired product.It is noted that the support nanoparticles Y(OH)CO 3 and Ce(OH)CO 3 also exhibit catalytic activity.The yield of the final product of the reaction using them as catalysts is 55%(TOF = 11 and 8 h 1,respectively).Thus,the use of yttrium and cerium hydroxycarbonates as supports allows to decrease the palladium content in the nanocomposites to 0.01%～1% and,consequently,reduce the cost of the catalyst while maintaining its high catalytic activity.展开更多
文摘Lithium-sulfur(Li-S)batteries have great promise for next-generation energy storage devices due to the high theoretical specific capacity(1675 mAh g^(-1))of sulfur with chemical conversion for charge storage.However,their practical use is hindered by the slow redox kinetics of sulfur and the“shuttle effect”arising from dissolved lithium polysulfides(LiPSs).In recent years,various carbon-based materials have served as sulfur hosts and catalysts for accelerating sulfur conversion redox kinetics and alleviating LiPS shuttling.However,they often suffer from irreversible passivation and structural changes that destroy their long-term performance.We consider the main problems limiting their stability,including excessive LiPS adsorption,passivation by insulating Li2S,and surface reconstruction,and clarify how these factors lead to capacity fade.We then outline effective strategies for achieving long-term sulfur catalysis,focusing on functional carbon,such as designing suitable carbon-supported catalyst interfaces,creating well-distributed active sites,adding cocatalysts to improve electron transfer,and using carbon-based protective layers to suppress unwanted side reactions.Using this information should enable the development of stable,high-activity catalysts capable of long-term operation under practical conditions in Li-S batteries.
文摘The catalytic proficiency of three MONs for AP thermal decomposition was studied in this work.A chemical co-precipitation method was used for synthesis of MONs(CuZnO,CoZnO,and NiZnO)and their characterization carried out by utilizing XRD,FTIR,and SEM.The TGA/DSC technique was employed for the investigation of the catalytic proficiency of MONs on the AP.The DSC data were used for measuring activation energy of catalyzed AP by using Ozawa,Kissinger,and Starink method.The MONs were much sensitive for AP decomposition,and the performance of AP decomposition was further improved.Among all the MONs,the CuZnO exhibits higher catalytic action than others and decomposition temperature of AP is descending around 117℃ by CuZnO.The reduction in the activation energy was noticed after the incorporation of MONs in AP.
基金Project(40973074) supported by the National Natural Science Foundation of China
文摘A novel heterogeneous catalytic ozonation process in water treatment was studied, with a copper-loaded activated carbon （Cu/AC） that was prepared by an incipient wetness impregnation method at low temperature and tested as a catalyst in the ozonation of phenol and oxalic acid. Cu/AC was characterized using XRD, BET and SEM techniques. Compared with ozonation alone, the presence of Cu/AC in the ozonation processes significantly improves the degradation of phenol or oxalic acid. With the introduction of the hydroxyl radical scavenger, i.e., turt-butanol alcohol （t-BuOH）, the degradation efficiency of both phenol and oxalic acid in the Cu/AC catalyzed ozonation process decreases by 22% at 30 min. This indicates that Cu/AC accelerates ozone decomposition into certain concentration of hydroxyl radicals. The amount of Cu（II ） produced during the reaction of Cu/AC-catalyzed ozonation of phenol or oxalic acid is very small, which shows that the two processes are both heterogeneous catalytic ozonation reactions.
基金Defence Research and Development Establishment(DRDE),DRDO,Gwalior-474002,(India)for his keen interestencouragement.The DRDE accession number for this manuscript is DRDE-IREC-130-28/03/2024.
文摘Chemical warfare agents(CWAs)are extremely lethal substances used in warfare and terrorism,capable of causing permanent damage even in small doses,despite medical intervention.Therefore,detection,protection,and detoxification of CWAs are vital for the safety of first responders,military personnel,and civilians,driving significant research in this area.Herein,we designed and synthesized a poly(-diallyldimethylammonium chloride)(PDDA)mediated cupric oxide(CuO)functionalized activated carbon fabric(ACF),termed ACF@PDDA-CuO,as an adsorbent filter material for self-detoxifying chemical protective clothing.PDDA,a positively charged polyelectrolyte,effectively binds in-situ synthesized CuO to the negatively charged ACF surface,serving as a suitable binder.This study demonstrates the synergistic effects of PDDA-CuO functionalization on ACF,where PDDA treatment enhanced mechanical and comfort properties,and CuO crystal growth significantly improved detoxification efficacy against the CWA Nerve Agent Sarin.Comprehensive analyses,including FTIR,BET surface area analysis,SEM,EDS,TEM,STEM,TGA,XPS,and XRD,confirmed the uniform deposition of CuO and PDDA on the ACF surface.The Cu content on ACF@PDDA-CuO samples was measured via iodometric titration.The materials were evaluated for tensile strength,air permeability,water vapor permeability,nerve agent(Sarin)detoxification,and blister agent(Sulfur Mustard)breakthrough time to assess their applicability for protective clothing.The optimized PDDA-CuO on ACF detoxified 82.04%of Sarin within 18 h,compared to 25.22%by ACF alone,and enhanced tensile strength by 23.67%,air permeability by 24.63%,and water vapor permeability by 3.94%,while maintaining protection against Sulfur Mustard for 24 h.These findings indicate that ACF@PDDA-CuO is a promising candidate for CWA protective clothing,offering robust protection with enhanced comfort.
基金The project was supported by the Shandong Natural Science Foundation (ZR2017MB020)Graduate Innovation Foundation of Yantai University (YDYB1909).
文摘Nd-Co 3O 4 catalysts were prepared by hydrothermal and co-precipitation methods to catalyze the decomposition of N 2O. The catalysts prepared by hydrothermal method showed higher activity. Among the hydrothermal Nd-Co 3O 4 catalysts, the catalyst with Nd/Co molar ratio of 0.01 had higher activity. 0.01Nd-Co 3O 4 catalyst was then impregnated by K 2CO 3 solution to prepare K-modified catalyst. The catalysts were characterized by means of X-ray diffraction (XRD), nitrogen physisorption, scanning electrons microscopy (SEM), X-ray photoelectron spectroscopy (XPS), hydrogen temperature-programmed reduction (H 2-TPR), and oxygen temperature-programmed desorption (O 2-TPD). The results show that Nd-Co 3O 4 and K-modified catalysts exhibit spinel structure. In contrast to bare Nd-Co 3O 4, the K-modified catalyst with higher activity is due to its weaker strength of Co-O bond and easier desorption of surface oxygen species. In addition, over 90% conversion of N 2O can be reached over 0.02K/0.01Nd-Co 3O 4 at 350 ℃ for 40 h under the co-presence of oxygen and steam in feed gases.
文摘This paper presents the catalytic effects of Cu-Co~* catalyst on the decomposition of AN and AN/KDN based oxidizer and propellant samples. Ozawa-Flynn-Wall(OFW) iso-conversional method was used for the kinetic studies and to compute the activation energy(Ea) values for various decomposition steps of the prepared oxidizer and propellant samples in the temperature range of 50 e500C. TG-DTG experiments were carried out for both oxidizer and propellant samples at the heating rates of 3, 5, and 10C/min. AN/KDN based oxidizer samples were prepared by an evaporative co-crystallization method. Citric acid sol-gel method was used for the synthesis of Cu-Co~* catalyst. The propellant sample contains HTPB as the fuel binder along with other ingredients such as TDI, DOA, and Glycerol. The Cu-Co~* catalyst was used as 2% by weight to the total weight of catalyzed oxidizer and propellant samples. It was observed from the present study that, Cu-Co~* catalyst helps in reducing the Ea values for AN and AN based propellant samples. However, with the percentage increment of KDN in the AN crystals, Ea value increases.Further, it was observed that Cu-Co~* catalyst stabilizes the initial partial decomposition of KDN.
文摘The purpose of this work is to synthesize the catalytic systems containing palladium nanoparticles and using hydroxycarbonates of yttrium and cerium as supports,and to test the catalytic activity of the obtained catalysts in the Suzuki cross-couping reaction.Nanocomposites Pd/Y(OH)CO 3 and Pd/Ce(OH)CO 3 were synthesized according to two methods:the first one-simultaneous production of nanoscale substrate and immobilization of palladium nanoparticles on its surface(nanocomposites 1),the second one-the prior synthesis of polyvinylpyrrolidone stabilized palladium nanoparticles followed by their immobilization on the nano sized substrate surface(nanocomposites 2).The reaction between phenylboronic acid and iodobenzene is chosen as a model one.The dependence of the catalytic activity of catalysts on the method of their synthesis was established.It was established that nanocomposites 2 exhibit higher catalytic activity in the selected reaction compared to the nanocomposites 1.The TOF values for the nanocomposites 1 are 6663～14617 h 1 when using the substrate Ce(OH)CO 3 and 13774～27084 h 1 when using the substrate Y(OH)CO 3,while the nanocomposites 2 reveal TOF = 87287 h 1 for the substrate Ce(OH)CO 3 and TOF = 97746 h 1 for the substrate Y(OH)CO 3 under other equal conditions.In addition,nanocomposites 2 "work" at room temperature giving a high yield of the desired product.It is noted that the support nanoparticles Y(OH)CO 3 and Ce(OH)CO 3 also exhibit catalytic activity.The yield of the final product of the reaction using them as catalysts is 55%(TOF = 11 and 8 h 1,respectively).Thus,the use of yttrium and cerium hydroxycarbonates as supports allows to decrease the palladium content in the nanocomposites to 0.01%～1% and,consequently,reduce the cost of the catalyst while maintaining its high catalytic activity.
