This experiment designed the pulsed electric fields （PEF） of high intensity of 100 kV· cm^-1 sterilization system. Fluorescent pseudomonas as target cell was operated 180 s in the PEF. By observing the differen...This experiment designed the pulsed electric fields （PEF） of high intensity of 100 kV· cm^-1 sterilization system. Fluorescent pseudomonas as target cell was operated 180 s in the PEF. By observing the difference of the bacteria before and after the disposal by TEM, it is found that the cell walls of the treated bacteria were broken. Irreversible perforations were formed on the cell membrane. The cell inclusions and cell fragments were leaked. The cell died as a result. The results showed that the PEF sterilization system designed can be used for liquid food sterilization experiments.展开更多
Objective This work examines the impact of external electric fields at terahertz(THz)frequencies on doublestranded deoxyribonucleic acid(dsDNA)systems adsorbed on Au(111)surfaces in aqueous environments.Methods The in...Objective This work examines the impact of external electric fields at terahertz(THz)frequencies on doublestranded deoxyribonucleic acid(dsDNA)systems adsorbed on Au(111)surfaces in aqueous environments.Methods The investigation utilizes a molecular dynamics(MD)approach at the atomic level and vibrational dynamics calculations using the GolDNA-Amber force field.Results The results reveal that the sugar-phosphate backbone of the DNA exhibits reduced adherence to the gold surface,while the side chains display a stronger affinity.When subjecting the hydrated DNA strands to an electric field with frequencies up to 10 THz,peak intensities of vibrational dynamic density(VDoS)are observed at five different frequencies.Moreover,the strong electric field causes hydrogen bonds in the DNA within the slit to break.The sensitivity to the electric field is particularly pronounced at 8.8 THz and 9.6 THz,with different vibrational modes observed at varying electric field strengths.Conclusion These findings contribute to an enhanced understanding of the molecular organization of gold-plated charged biological interfaces.展开更多
Current distribution in a drained aluminum reduction cell is critical due to its influence on the current efficiency, electrolysis stability, anodes and cathodes integrity. A finite element model was developed to simu...Current distribution in a drained aluminum reduction cell is critical due to its influence on the current efficiency, electrolysis stability, anodes and cathodes integrity. A finite element model was developed to simulate the electric field in a 75 kA drained aluminum reduction cell. The current distribution and influences of the cathode inclination angle and anode-cathode distance (ACD) were studied. The results show that relatively large horizontal current density appears in the aluminum film, and the maximum value reaches 600 kA/m2. As the cathode inclination angle increases from 2° to 15°, the maximum current density of the metal pad increases by 15%, while the maximum current density of the aluminum-wettable coating layer decreases by 27%. The influence of the ACD on the current distribution is not obvious.展开更多
A new real-time underwater equipment location method adopting an electric field induced by a standard current source is proposed.Our goals were real-time tracking and location of stationary or moving underwater equipm...A new real-time underwater equipment location method adopting an electric field induced by a standard current source is proposed.Our goals were real-time tracking and location of stationary or moving underwater equipment both in shallow and deep seas,under noisy conditions.The main features of this method are as follows:(1)a standard current source on the water surface,which can be towed by a vehicle,consisting of two electrodes,a signal generator,and a GPS unit;(2)measurement of the extremely low frequency(ELF)electric field emitted by the current source,made possible by electric field sensors on the underwater equipment;(3)position of the underwater equipment is estimated in real time based on a progressive update extended Kalman filter(PUEKF),which is carried out using the propagation model of an ELF electric field because the electric field at the position of the underwater equipment and the current source position are known.We verified the accuracy of our method and confirmed real-time location feasibility through numerical,physical scale,and real-time sea experiments.Through numerical experiments,we verified that our method works for underwater equipment location in real-world conditions,and the location error can be less than 0.2 m.Next,real-time location experiments for stationary underwater measuring equipment in water tank were conducted.The result shows that the location error can be less than 0.1 m.We also confirmed real-time location feasibility through the use of offshore experiment.We expect that our method will complement conventional underwater acoustic location methods for underwater equipment in acoustically noisy environments.展开更多
Region partition(RP) is the key technique to the finite element parallel computing(FEPC),and its performance has a decisive influence on the entire process of analysis and computation.The performance evaluation index ...Region partition(RP) is the key technique to the finite element parallel computing(FEPC),and its performance has a decisive influence on the entire process of analysis and computation.The performance evaluation index of RP method for the three-dimensional finite element model(FEM) has been given.By taking the electric field of aluminum reduction cell(ARC) as the research object,the performance of two classical RP methods,which are Al-NASRA and NGUYEN partition(ANP) algorithm and the multi-level partition(MLP) method,has been analyzed and compared.The comparison results indicate a sound performance of ANP algorithm,but to large-scale models,the computing time of ANP algorithm increases notably.This is because the ANP algorithm determines only one node based on the minimum weight and just adds the elements connected to the node into the sub-region during each iteration.To obtain the satisfied speed and the precision,an improved dynamic self-adaptive ANP(DSA-ANP) algorithm has been proposed.With consideration of model scale,complexity and sub-RP stage,the improved algorithm adaptively determines the number of nodes and selects those nodes with small enough weight,and then dynamically adds these connected elements.The proposed algorithm has been applied to the finite element analysis(FEA) of the electric field simulation of ARC.Compared with the traditional ANP algorithm,the computational efficiency of the proposed algorithm has been shortened approximately from 260 s to 13 s.This proves the superiority of the improved algorithm on computing time performance.展开更多
In the case of three-layered(air-seawater-seabed)model,the analytical expressions of the static electric and static magnetic field produced by the static electric dipole located in seawater were derived by using the m...In the case of three-layered(air-seawater-seabed)model,the analytical expressions of the static electric and static magnetic field produced by the static electric dipole located in seawater were derived by using the mirror image theory.Combined with the distribution of the underwater electric potential measured in laboratory,an electric dipole model for physical scale of ship was established and the distribution characteristics of an actual ship' s corrosion related magnetic field were obtained.Based on established models,theoretical analysis and calculation were made to catch out the distribution characteristics of static magnetic field related with corrosion and anticorrosion,which can not be measured directly in seawater.The results show that the static magnetic field related with corrosion and anticorrosion is a kind of noteworthy obstacle signal for degaussed ships.展开更多
The oil-pressboard insulation is a typical composite insulation system widely used in the design and manufactory of large power apparatus. The implement of oil-pressboard insulation may lead to surface electrification...The oil-pressboard insulation is a typical composite insulation system widely used in the design and manufactory of large power apparatus. The implement of oil-pressboard insulation may lead to surface electrification and discharge at the interface under certain condition. It is of significant importance to take an insight into the phenomenon occurring at the interface. Through experiment, the pressboard is found as a porous material. The interface changes abruptly from bulk pressboard to the bulk oil as a result of the porous structure. A new model is proposed which divides the interface into bulk oil region, transition region, and bulk pressboard region. The width of the transition region is decided according to the microtome figure. The effective permittivity of the transition region is calculated using a new model based on fractal theory. The model is validated and compared with previous calculation model. The effect of the existence of transition region on the electric field distribution is discussed.展开更多
With the raise of voltage level in electric power grid,the phenomena of high voltage gas insulation has received extensive attention from all over the world.The research on the breakdown mechanism of vacuum which is t...With the raise of voltage level in electric power grid,the phenomena of high voltage gas insulation has received extensive attention from all over the world.The research on the breakdown mechanism of vacuum which is the main insulation gas in high voltage level is one of the most important issues.It is also important to the study of vacuum arc in vacuum switch.But for the limitations of available method used in analyzing the breakdown mechanism of vacuum,the main research on vacuum breakdown is macroscopic experiment.The experiments are greatly influenced by environmental factors and high vacuum degree is difficult to be ensured.So the data from the experiments are dispersive and the complex physical change in vacuum breakdown can not be revealed.The purpose of this work is to analyze the mechanism of vacuum breakdown quantitatively by microscopic numerical simulation.The particle in cell and Monte Carlo methods are used here to solve microscopic dynamic equation of gas.Based on the field emission theory in vacuum,electrons produced by the cathode and ions produced by the collision between electron and metal vapor molecule are the objects of this study.The motions of microscopic particles which are at the functions of the applied and self-consistent electric filed are traced in time and two space dimensions.Mont Carlo method is used here to cope with the collisions between electrons and metal vapor molecules.The cross sections of the collision which is related with the energy are all from the experiments.The secondary electron emission,exciting,elastic and ionizing collisions between electrons and metal vapor molecules have been considered in this paper.By the simulation,the number densities of electron and ion are acquired and the microscopic dynamic electric field produced by space charge is also calculated. The effect of vacuum degree on discharge voltage is also discussed here.According to the simulation data,we draw the conclusion that the main reason for vacuum arc formation is metal vapor ionization and large amount of metal gas is from high energy electrons' collision with the anode.展开更多
Transition metal dichalcogenides are interesting candidates as photocatalysts for hydrogen evolution reaction.The MnPSe_(3)/WS_(2) heterostructure is hence studied here with first principles calculations by exploring ...Transition metal dichalcogenides are interesting candidates as photocatalysts for hydrogen evolution reaction.The MnPSe_(3)/WS_(2) heterostructure is hence studied here with first principles calculations by exploring its electronic properties under the application of an electric field.It is discovered that the band gap will decrease from the WS_(2) monolayer to the MnPSe_(3)/WS_(2) heterostructure with Perdew-Burke-Ernzerhof functional,while increase slightly when electron correlation is involved.The conduction band minimum of the heterostructure is determined by the MnPSe3 layer,while the valence band maximum is contributed by the WS_(2)layer.The band edges and band gap suggest that the heterostructure will have good photocatalytic properties for water splitting.Moreover,comparing to monolayer WS_(2),the light absorption in both the ultraviolet and visible regions will be enhanced.When an electric field is present,a linear relation is observed between the electric field and the band gap within specific range,which can thus modulate the photocatalytic performance of this heterostructure.展开更多
Environmental stress screening (ESS) is a technological process to reduce the costly early field failure of electronic components. This paper builds an optimization model for ESS of electronic components to obtain the...Environmental stress screening (ESS) is a technological process to reduce the costly early field failure of electronic components. This paper builds an optimization model for ESS of electronic components to obtain the optimal ESS duration. The failure phenomena of ESS are modeled by mixed distribution, and optimal ESS duration is defined by maximizing life-cycle cost savings under the condition of meeting reliability requirement.展开更多
The resistance arrangements of the flexes connecting with the cathode bus bar in aluminum reduction cells were generalized as three modes. In each mode the universal method to select proper resistivity of the flexes w...The resistance arrangements of the flexes connecting with the cathode bus bar in aluminum reduction cells were generalized as three modes. In each mode the universal method to select proper resistivity of the flexes was induced respectively to insure that the current in local group of flexes was equal. Furthermore, a 350 kA aluminum reduction cell based electric field model was developed by finite element method to evaluate the effect of the method. Suggestions on selection of three modes were also put forward. The results show that the methods of resistance optimization can reduce the current variation about 180 A compared with that in original case.展开更多
A technique using finite element and boundary integral method (FE-BI) and reciprocity theorem is presented to analyze the radiation characteristics of cavity backed antenna mounted on a conducting cone. The electric f...A technique using finite element and boundary integral method (FE-BI) and reciprocity theorem is presented to analyze the radiation characteristics of cavity backed antenna mounted on a conducting cone. The electric fields inside the cavity and on the aperture are obtained using finite element and boundary integral method. The far-field characteristic of the antenna is computed using reciprocity theorem. The paper begins with a general description of the method. An application of this method is given and the numerical result is compared with the experimental result.展开更多
基金the Youth Science Fund of Heilongjiang Province (QC07C39)Postdoctoral Fund of Heilongjiang (LBH-Z06163)Science Research Fund of Northeast Agricultural University
文摘This experiment designed the pulsed electric fields （PEF） of high intensity of 100 kV· cm^-1 sterilization system. Fluorescent pseudomonas as target cell was operated 180 s in the PEF. By observing the difference of the bacteria before and after the disposal by TEM, it is found that the cell walls of the treated bacteria were broken. Irreversible perforations were formed on the cell membrane. The cell inclusions and cell fragments were leaked. The cell died as a result. The results showed that the PEF sterilization system designed can be used for liquid food sterilization experiments.
基金supported by a grant from National Defense Science and Technology Innovation Special Zone of China(02-ZT-008).
文摘Objective This work examines the impact of external electric fields at terahertz(THz)frequencies on doublestranded deoxyribonucleic acid(dsDNA)systems adsorbed on Au(111)surfaces in aqueous environments.Methods The investigation utilizes a molecular dynamics(MD)approach at the atomic level and vibrational dynamics calculations using the GolDNA-Amber force field.Results The results reveal that the sugar-phosphate backbone of the DNA exhibits reduced adherence to the gold surface,while the side chains display a stronger affinity.When subjecting the hydrated DNA strands to an electric field with frequencies up to 10 THz,peak intensities of vibrational dynamic density(VDoS)are observed at five different frequencies.Moreover,the strong electric field causes hydrogen bonds in the DNA within the slit to break.The sensitivity to the electric field is particularly pronounced at 8.8 THz and 9.6 THz,with different vibrational modes observed at varying electric field strengths.Conclusion These findings contribute to an enhanced understanding of the molecular organization of gold-plated charged biological interfaces.
基金Project(2005CB623703) supported by the National Basic Research Program of China
文摘Current distribution in a drained aluminum reduction cell is critical due to its influence on the current efficiency, electrolysis stability, anodes and cathodes integrity. A finite element model was developed to simulate the electric field in a 75 kA drained aluminum reduction cell. The current distribution and influences of the cathode inclination angle and anode-cathode distance (ACD) were studied. The results show that relatively large horizontal current density appears in the aluminum film, and the maximum value reaches 600 kA/m2. As the cathode inclination angle increases from 2° to 15°, the maximum current density of the metal pad increases by 15%, while the maximum current density of the aluminum-wettable coating layer decreases by 27%. The influence of the ACD on the current distribution is not obvious.
基金supported by the Youth Foundation of the National Natural Science Foundation of China(Grant No.51509252)。
文摘A new real-time underwater equipment location method adopting an electric field induced by a standard current source is proposed.Our goals were real-time tracking and location of stationary or moving underwater equipment both in shallow and deep seas,under noisy conditions.The main features of this method are as follows:(1)a standard current source on the water surface,which can be towed by a vehicle,consisting of two electrodes,a signal generator,and a GPS unit;(2)measurement of the extremely low frequency(ELF)electric field emitted by the current source,made possible by electric field sensors on the underwater equipment;(3)position of the underwater equipment is estimated in real time based on a progressive update extended Kalman filter(PUEKF),which is carried out using the propagation model of an ELF electric field because the electric field at the position of the underwater equipment and the current source position are known.We verified the accuracy of our method and confirmed real-time location feasibility through numerical,physical scale,and real-time sea experiments.Through numerical experiments,we verified that our method works for underwater equipment location in real-world conditions,and the location error can be less than 0.2 m.Next,real-time location experiments for stationary underwater measuring equipment in water tank were conducted.The result shows that the location error can be less than 0.1 m.We also confirmed real-time location feasibility through the use of offshore experiment.We expect that our method will complement conventional underwater acoustic location methods for underwater equipment in acoustically noisy environments.
基金Project(61273187)supported by the National Natural Science Foundation of ChinaProject(61321003)supported by the Foundation for Innovative Research Groups of the National Natural Science Foundation of China
文摘Region partition(RP) is the key technique to the finite element parallel computing(FEPC),and its performance has a decisive influence on the entire process of analysis and computation.The performance evaluation index of RP method for the three-dimensional finite element model(FEM) has been given.By taking the electric field of aluminum reduction cell(ARC) as the research object,the performance of two classical RP methods,which are Al-NASRA and NGUYEN partition(ANP) algorithm and the multi-level partition(MLP) method,has been analyzed and compared.The comparison results indicate a sound performance of ANP algorithm,but to large-scale models,the computing time of ANP algorithm increases notably.This is because the ANP algorithm determines only one node based on the minimum weight and just adds the elements connected to the node into the sub-region during each iteration.To obtain the satisfied speed and the precision,an improved dynamic self-adaptive ANP(DSA-ANP) algorithm has been proposed.With consideration of model scale,complexity and sub-RP stage,the improved algorithm adaptively determines the number of nodes and selects those nodes with small enough weight,and then dynamically adds these connected elements.The proposed algorithm has been applied to the finite element analysis(FEA) of the electric field simulation of ARC.Compared with the traditional ANP algorithm,the computational efficiency of the proposed algorithm has been shortened approximately from 260 s to 13 s.This proves the superiority of the improved algorithm on computing time performance.
基金Sponsored by National Defense Pre-research Foundation(51444070105JB11)
文摘In the case of three-layered(air-seawater-seabed)model,the analytical expressions of the static electric and static magnetic field produced by the static electric dipole located in seawater were derived by using the mirror image theory.Combined with the distribution of the underwater electric potential measured in laboratory,an electric dipole model for physical scale of ship was established and the distribution characteristics of an actual ship' s corrosion related magnetic field were obtained.Based on established models,theoretical analysis and calculation were made to catch out the distribution characteristics of static magnetic field related with corrosion and anticorrosion,which can not be measured directly in seawater.The results show that the static magnetic field related with corrosion and anticorrosion is a kind of noteworthy obstacle signal for degaussed ships.
基金Project(2009CB724504)supported by the National Basic Research Program of China
文摘The oil-pressboard insulation is a typical composite insulation system widely used in the design and manufactory of large power apparatus. The implement of oil-pressboard insulation may lead to surface electrification and discharge at the interface under certain condition. It is of significant importance to take an insight into the phenomenon occurring at the interface. Through experiment, the pressboard is found as a porous material. The interface changes abruptly from bulk pressboard to the bulk oil as a result of the porous structure. A new model is proposed which divides the interface into bulk oil region, transition region, and bulk pressboard region. The width of the transition region is decided according to the microtome figure. The effective permittivity of the transition region is calculated using a new model based on fractal theory. The model is validated and compared with previous calculation model. The effect of the existence of transition region on the electric field distribution is discussed.
基金Supported by National Natural Science Foundation of China(50877048)Program for New Century Excellent Talents in University of China(NECT-08-0863)Key Scientific and Technological project of Liaoning Science and Technology Department (2010219016)
文摘With the raise of voltage level in electric power grid,the phenomena of high voltage gas insulation has received extensive attention from all over the world.The research on the breakdown mechanism of vacuum which is the main insulation gas in high voltage level is one of the most important issues.It is also important to the study of vacuum arc in vacuum switch.But for the limitations of available method used in analyzing the breakdown mechanism of vacuum,the main research on vacuum breakdown is macroscopic experiment.The experiments are greatly influenced by environmental factors and high vacuum degree is difficult to be ensured.So the data from the experiments are dispersive and the complex physical change in vacuum breakdown can not be revealed.The purpose of this work is to analyze the mechanism of vacuum breakdown quantitatively by microscopic numerical simulation.The particle in cell and Monte Carlo methods are used here to solve microscopic dynamic equation of gas.Based on the field emission theory in vacuum,electrons produced by the cathode and ions produced by the collision between electron and metal vapor molecule are the objects of this study.The motions of microscopic particles which are at the functions of the applied and self-consistent electric filed are traced in time and two space dimensions.Mont Carlo method is used here to cope with the collisions between electrons and metal vapor molecules.The cross sections of the collision which is related with the energy are all from the experiments.The secondary electron emission,exciting,elastic and ionizing collisions between electrons and metal vapor molecules have been considered in this paper.By the simulation,the number densities of electron and ion are acquired and the microscopic dynamic electric field produced by space charge is also calculated. The effect of vacuum degree on discharge voltage is also discussed here.According to the simulation data,we draw the conclusion that the main reason for vacuum arc formation is metal vapor ionization and large amount of metal gas is from high energy electrons' collision with the anode.
基金Project(2682019CX06)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(2019KY23)supported by Research Start-up Fund from the Southwest Jiaotong University,China+2 种基金Projects(20ZDYF0236,20ZDYF0490)supported by the Key R&D Projects in the Field of High and new Technology of Sichuan,ChinaProject(52072311)supported by the National Natural Science Foundation of ChinaProject(2019JDJQ0009)supported by the Outstanding Young Scientific and Technical Talents in Sichuan Province,China。
文摘Transition metal dichalcogenides are interesting candidates as photocatalysts for hydrogen evolution reaction.The MnPSe_(3)/WS_(2) heterostructure is hence studied here with first principles calculations by exploring its electronic properties under the application of an electric field.It is discovered that the band gap will decrease from the WS_(2) monolayer to the MnPSe_(3)/WS_(2) heterostructure with Perdew-Burke-Ernzerhof functional,while increase slightly when electron correlation is involved.The conduction band minimum of the heterostructure is determined by the MnPSe3 layer,while the valence band maximum is contributed by the WS_(2)layer.The band edges and band gap suggest that the heterostructure will have good photocatalytic properties for water splitting.Moreover,comparing to monolayer WS_(2),the light absorption in both the ultraviolet and visible regions will be enhanced.When an electric field is present,a linear relation is observed between the electric field and the band gap within specific range,which can thus modulate the photocatalytic performance of this heterostructure.
文摘Environmental stress screening (ESS) is a technological process to reduce the costly early field failure of electronic components. This paper builds an optimization model for ESS of electronic components to obtain the optimal ESS duration. The failure phenomena of ESS are modeled by mixed distribution, and optimal ESS duration is defined by maximizing life-cycle cost savings under the condition of meeting reliability requirement.
基金Project(60634020) supported by the National Natural Science Foundation of China
文摘The resistance arrangements of the flexes connecting with the cathode bus bar in aluminum reduction cells were generalized as three modes. In each mode the universal method to select proper resistivity of the flexes was induced respectively to insure that the current in local group of flexes was equal. Furthermore, a 350 kA aluminum reduction cell based electric field model was developed by finite element method to evaluate the effect of the method. Suggestions on selection of three modes were also put forward. The results show that the methods of resistance optimization can reduce the current variation about 180 A compared with that in original case.
文摘A technique using finite element and boundary integral method (FE-BI) and reciprocity theorem is presented to analyze the radiation characteristics of cavity backed antenna mounted on a conducting cone. The electric fields inside the cavity and on the aperture are obtained using finite element and boundary integral method. The far-field characteristic of the antenna is computed using reciprocity theorem. The paper begins with a general description of the method. An application of this method is given and the numerical result is compared with the experimental result.
