A new incremental clustering framework is presented, the basis of which is the induction as inverted deduction. Induction is inherently risky because it is not truth-preserving. If the clustering is considered as an i...A new incremental clustering framework is presented, the basis of which is the induction as inverted deduction. Induction is inherently risky because it is not truth-preserving. If the clustering is considered as an induction process, the key to build a valid clustering is to minimize the risk of clustering. From the viewpoint of modal logic, the clustering can be described as Kripke frames and Kripke models which are reflexive and symmetric. Based on the theory of modal logic, its properties can be described by system B in syntax. Thus, the risk of clustering can be calculated by the deduction relation of system B and proximity induction theorem described. Since the new proposed framework imposes no additional restrictive conditions of clustering algorithm, it is therefore a universal framework. An incremental clustering algorithm can be easily constructed by this framework from any given nonincremental clustering algorithm. The experiments show that the lower the a priori risk is, the more effective this framework is. It can be demonstrated that this framework is generally valid.展开更多
The effect of diluted solution's magnetization on induction time and growth period of natural gas hydrate (NGH) has been investigated in quiescent reaction system at pressure of 4. 5 MPa and temperature of 274 K w...The effect of diluted solution's magnetization on induction time and growth period of natural gas hydrate (NGH) has been investigated in quiescent reaction system at pressure of 4. 5 MPa and temperature of 274 K with SDS as surfactant, by using volume fixed and pressure falling method. Experimental results show that magnetization will have effect on the induction time of NGH. After magnetization with magnetic field intensity of 0.33 T, the induction time of NGH has been reduced to 47 min (average) from 99 min (average) in which there is no magnetization. On the other hand, the induction time has been prolonged after magnetization of the diluted solution with magnetic field intensity of 0.05 T, 0. 11 T, 0.22 T, 0.44T. Especially with magnetic field intensity of 0.11 T, the induction time had even been prolonged to 431min (average). The effect of magnetization on the growth period of NGH has not been found at the experimental condition.展开更多
New method for handling roof of the base successive mining is proposed, which is induction caving in the roof. The key is that it is made certain to the station of the space-time in the induction caving roof, as the s...New method for handling roof of the base successive mining is proposed, which is induction caving in the roof. The key is that it is made certain to the station of the space-time in the induction caving roof, as the stress is released with the mining process. And applying the catastrophe theory, the influencing factors of induction caving roof are studied in the emptied areas, such as the mechanical property of the surrounding rock, the area of the gob,the scope and dimension of tensile stress. The results show that the key factor is the area of the gob to the method of the induction caving roof. Then according to the geology and the ore characteristic, the three dimension FEM mechanical model is built in Tongkeng Mine, the laws of the tensile stress are analyzed to the space and the time in the roof with the mining, then it is rational design to the mine step and time of the handing the roof.展开更多
Fault detection of an induction motor was carried out using the information of the stator current. After synchronizing the actual data, Fourier and wavelet transformations were adopted in order to obtain the sideband ...Fault detection of an induction motor was carried out using the information of the stator current. After synchronizing the actual data, Fourier and wavelet transformations were adopted in order to obtain the sideband or detail value characteristics under healthy and various faulty operating conditions. The most reliable phase current among the three phase currents was selected using an approach that employs the fuzzy entropy measure. Data were trained with a neural network system, and the fault detection algorithm was verified using the unknown data. Results of the proposed approach based on Fourier and wavelet transformations indicate that the faults can be properly classified into six categories. The training error is 5.3×10-7, and the average test error is 0.103.展开更多
An analytic electromagnetic calculation method for doubly fed induction generator(DFIG) in wind turbine system was presented. Based on the operation principles, steady state equivalent circuit and basic equations of D...An analytic electromagnetic calculation method for doubly fed induction generator(DFIG) in wind turbine system was presented. Based on the operation principles, steady state equivalent circuit and basic equations of DFIG, the modeling for electromagnetic calculation of DFIG was proposed. The electromagnetic calculation of DFIG was divided into three steps: the magnetic flux calculation, parameters derivation and performance checks. For each step, the detailed numeric calculation formulas were all derived. Combining the calculation formulas, the whole electromagnetic calculation procedure was established, which consisted of three iterative calculation loops, including magnetic saturation coefficient, electromotive force and total output power. All of the electromagnetic and performance data of DIFG can be calculated conveniently by the established calculation procedure, which can be used to evaluate the new designed machine. A 1.5 MW DFIG designed by the proposed procedure was built, for which the whole type tests including no-load test, load test and temperature rising test were carried out. The test results have shown that the DFIG satisfies technical requirements and the test data fit well with the calculation results which prove the correctness of the presented calculation method.展开更多
This study presents analysis, control and comparison of three hybrid approaches for the direct torque control (DTC) of the dual star induction motor (DSIM) drive. Its objective consists of combining three different he...This study presents analysis, control and comparison of three hybrid approaches for the direct torque control (DTC) of the dual star induction motor (DSIM) drive. Its objective consists of combining three different heuristic optimization techniques including PID-PSO, Fuzzy-PSO and GA-PSO to improve the DSIM speed controlled loop behavior. The GA and PSO algorithms are developed and implemented into MATLAB. As a result, fuzzy-PSO is the most appropriate scheme. The main performance of fuzzy-PSO is reducing high torque ripples, improving rise time and avoiding disturbances that affect the drive performance.展开更多
AC motors, especially the squirrel cage induction motors have the advantages of simple structure, good reliability and low cost. They are more suitable to be used as electrical dynamometers to provide dynamic load for...AC motors, especially the squirrel cage induction motors have the advantages of simple structure, good reliability and low cost. They are more suitable to be used as electrical dynamometers to provide dynamic load for bench test systems. But, the speed and torque of induction motors are not easy to be controlled accurately. In this work, an electrical dynamometer based on the induction motor is proposed. In order to get better control performance of torque and speed of induction motor, an improved direct torque control method(DTC) is also developed based on the space vector modulation(SVM) technique. The performance of the proposed dynamometer system is validated in the Matlab/Simulink platform. The simulation results show that the new dynamometer has good torque and stator flux response. And the torque and stator current ripples of it are reduced significantly compared with using the conventional DTC method.展开更多
The experiment was performed on induction tetraploid of Haliotis discus hannai at two-cell stage through cell fusion with PEG treatment. In this paper, the orthogonal experiment of three factors and three levels [L9 ...The experiment was performed on induction tetraploid of Haliotis discus hannai at two-cell stage through cell fusion with PEG treatment. In this paper, the orthogonal experiment of three factors and three levels [L9 （3^4）] was used. Three factors and three levels were molecular weight of PEG： 8 000, 6 000, 4 000 mol ·g^-1; PEG concentration： 45%, 50%, 55%; treatment duration time： 1, 2, 3 min, respectively. The results showed that the optimal pattern of three factors and three levels on inducing tetraploid of Haliotis discus hannai at two-cell stage through using PEG treatment were： molecular weight 4 000, concentration 55%, treatment duration time： 2 min. The highest tetraploid induction rate was 10.8% at embryo period. The three factors treatment sequence was treatment duration time→concentration→molecular weight.展开更多
The evolution of temperature field of the continual motion induction cladding and the depth of heat affected zone are studied in this study.A three-dimensional finite element model for the point type continual inducti...The evolution of temperature field of the continual motion induction cladding and the depth of heat affected zone are studied in this study.A three-dimensional finite element model for the point type continual induction cladding is established to investigate temperature distributions of fixed and motion induction cladding modes.The novel inductor is designed for cladding of curved surfaces.The modeling reliability is verified by the temperature measurements.The influence of process parameters on the maximum temperature and the generation and transfer of heat are studied.Quantitative calculation is performed to its melting rate to verify the temperature distribution and microstructures.The results show that a good metallurgical bond can be formed between the cladding layer and substrate.The melting rate gradually falls from the top of the cladding layer to the substrate,and the grain size in the substrate gradually rises.The heat affected zone is relatively small compared to integral heating.展开更多
A feature extraction and fusion algorithm was constructed by combining principal component analysis(PCA) and linear discriminant analysis(LDA) to detect a fault state of the induction motor.After yielding a feature ve...A feature extraction and fusion algorithm was constructed by combining principal component analysis(PCA) and linear discriminant analysis(LDA) to detect a fault state of the induction motor.After yielding a feature vector with PCA and LDA from current signal that was measured by an experiment,the reference data were used to produce matching values.In a diagnostic step,two matching values that were obtained by PCA and LDA,respectively,were combined by probability model,and a faulted signal was finally diagnosed.As the proposed diagnosis algorithm brings only merits of PCA and LDA into relief,it shows excellent performance under the noisy environment.The simulation was executed under various noisy conditions in order to demonstrate the suitability of the proposed algorithm and showed more excellent performance than the case just using conventional PCA or LDA.展开更多
In order to investigate Joule heating power,a three-dimensional finite element model(FEM) was developed to predict Joule heating power in the channels of double-loop inductor. The simulated results were compared with ...In order to investigate Joule heating power,a three-dimensional finite element model(FEM) was developed to predict Joule heating power in the channels of double-loop inductor. The simulated results were compared with experimental data from low load trials for a 400 kW inductor. The results,such as power factor and Joule heating power,show reasonable correlation with experimental data,and Joule heating rate reaches the maximum at the corners and the minimum at the centre of the cross-section area. With increasing relative permeability of iron core,length of coils,current frequency and resistivity of metal melt,the power factor and Joule heating power change. It is concluded that current frequency,the resistivity and length of the coil play a critical role in determining the power factor and Joule heating power,whereas relative permeability of the magnetic core shows no significant influence on them.展开更多
In order to investigate and predict the material properties of curved surface AISI 1045 steel component during spot continual induction hardening(SCIH),a 3D model for curved surface workpieces which coupled electromag...In order to investigate and predict the material properties of curved surface AISI 1045 steel component during spot continual induction hardening(SCIH),a 3D model for curved surface workpieces which coupled electromagnetic,temperature and phase transformation fields was built by finite element software ANSYS.A small size inductor and magnetizer were used in this model,which can move along the top surface of workpiece flexibly.The effect of inductor moving velocity and workpiece radius on temperature field was analyzed and the heating delay phenomenon was found through comparing the simulated results.The temperature field results indicate that the heating delay phenomenon is more obvious under high inductor moving velocity condition.This trend becomes more obvious if the workpiece radius becomes larger.The predictions of microstructure and micro-hardness distribution were also carried out via this model.The predicted results show that the inductor moving velocity is the dominated factor for the distribution of 100% martensite region and phase transformation region.The influencing factor of workpiece radius on 100% martensite region and phase transformation region distribution is obvious under relatively high inductor moving velocity but inconspicuous under relatively low inductor moving velocity.展开更多
Under various electromagnetic induction heating powers,different Al3Ti/Al composites were fabricated by in-situ synthesis method from aluminum and titanium fibers.Microstructures and particles distribution of the comp...Under various electromagnetic induction heating powers,different Al3Ti/Al composites were fabricated by in-situ synthesis method from aluminum and titanium fibers.Microstructures and particles distribution of the composites were examined by XRD,SEM and EDS.The results show that no other intermetallic compounds beside Al3Ti can be in-situ synthesized.Around the titanium fibers,the reaction zones and diffusion zones can be obviously found.Due to the stirring of the electromagnetic function,the formation of the micro-cracks inside the reaction zone was conducive to the peeling off of the Al3Ti particles,and ensures the continuous reaction between liquid aluminum and titanium fibers,as well as the diffusion of Al3Ti particles.At the same time,there were secondary splits of Al3Ti particles located in diffusion zones.Two-body abrasion test shows that with the increase of induction heating power,the wear rates of the composites reduced and the number of grooves decreased.展开更多
With the rapid increase of wind farms,the grid code needs to be improved to meet the requirement of wind farms and enhance grid stability.Doubly-fed induction generators are largely used in wind turbines,but they are ...With the rapid increase of wind farms,the grid code needs to be improved to meet the requirement of wind farms and enhance grid stability.Doubly-fed induction generators are largely used in wind turbines,but they are very sensitive to grid disturbances.The voltage swell can be caused by switching on capacitor banks or switching off large loads,which may result in the reversal of the power flow in the grid convertor;the current may flow from the grid into the DC link,which may step up DC voltage,and result in large faults of rotor currents and instantaneous power oscillation.The grid reactive compensation devices can not have the automatic swithing function after the low voltage fault,which will result in local reactive power surplus,so some wind power generators will retreat from the grid under high voltage protection.展开更多
The direct torque control of the dual star induction motor(DTC-DSIM) using conventional PI controllers is characterized by unsatisfactory performance, such as high ripples of torque and flux, and sensitivity to parame...The direct torque control of the dual star induction motor(DTC-DSIM) using conventional PI controllers is characterized by unsatisfactory performance, such as high ripples of torque and flux, and sensitivity to parametric variations. Among the most evoked control strategies adopted in this field to overcome these drawbacks presented in classical drive, it is worth mentioning the use of the second order sliding mode control(SOSMC) based on the super twisting algorithm(STA) combined with the fuzzy logic control(FSOSMC). In order to realize the optimal control performance, the FSOSMC parameters are adjusted using an optimization algorithm based on the genetic algorithm(GA). The performances of the envisaged control scheme, called G-FSOSMC, are investigated against G-SOSMC, G-PI and BBO-FSOSMC algorithms. The proposed controller scheme is efficient in reducing the torque and flux ripples, and successfully suppresses chattering. The effects of parametric uncertainties do not affect system performance.展开更多
OBJECTIVE CYP3A4 is one of the majordrug-metabolizing enzymes in humans and is responsible for the metabolism of over 50%of the clinically used drugs.Many drugs have been proved to induce the expression of CYP3A4,whic...OBJECTIVE CYP3A4 is one of the majordrug-metabolizing enzymes in humans and is responsible for the metabolism of over 50%of the clinically used drugs.Many drugs have been proved to induce the expression of CYP3A4,which usually causes drug-drug interactions and adverse reactions.The induction by numerous inducers shows significant interindividual differ ence but genetic factors can not totally explain or esti mate the difference.Recently,Epigenetic factors have been pointed out to contribute to that difference.Since histone methylation and acethylation are important parts of epigenetics,this study aimed to explore the role o active histone marks(H3K4me3,H3 acethylation)and inactive histone mark(H3K27me3)in rifampin-induced expression of CYP3A4 in LS174T cells.METHODS Chromatin immunoprecipitation(ChI P)assay was utilized to determine the levels of histone modifications in CYP3A4 promoter.RNA interference and Co-immunopre cipitation(Co-IP)assays were performed to determine the role of PXR and interactions between PXR and his tone methyltransferase/acetylase.RESULTS We found that the induction of CYP3A4 m RNA by rifampin treat ment(10μmol·L-1)in LS174T cells was accompanied by increased levels of H3K4me3 and H3 acethylation and decreased level H3K27me3 in CYP3A4 promoter Besides,enhanced recruitment of NCOA6,a coactivato of multiple nuclear receptors and transcription factors that is associated with H3K4 methyltransferase,and p300,a histone acetylase,were observed in CYP3A4promoter.To reveal the relationship between PXR activa tion and histone methylation/acethylation,gene silence was performed by sh RNA transfection.Knockdown o PXR expression not only removed the induction o CYP3A4,but also eliminated the recruitment of NCOA6and p300 and the decreased levels of H3K4me3 and H3acethylation in CYP3A4 promoter.Moreover,co-immuno cipitation(Co-IP)assay showed that interactions between PXR and NCOA6/p300 were occurred upon rifampin stimulation.CONCLUSION Histone methylation and acethylation contribute to rifampin-mediated induction of CYP3A4 through the interactions between PXR and histone methyltransferase/acetylase.展开更多
A 5-degrees-of-freedom bearingless induction motor is a multi-variable,nonlinear and strong-coupled system．In order to achieve rotor suspension and operation steadily,it is necessary to realize dynamic decoupling con...A 5-degrees-of-freedom bearingless induction motor is a multi-variable,nonlinear and strong-coupled system．In order to achieve rotor suspension and operation steadily,it is necessary to realize dynamic decoupling control among torque and suspension forces．In the paper,a method based on α-th order inverse system theory is used to study dynamic decoupling control．Firstly,the working principles of a 3-degrees-of-freedom magnetic bearing and a 2-degrees-of-freedom bearinglees induction motor are analyzed, the radial-axial force equations of 3-degrees-of-freedom magnetic bearing,the electromagnetic torque equation and radial force equations of the 2-degrees-of-freedom bearingless induction motor are given,and then the state equations of the 5-degrees-of-freedom bearingless induction motor are set up．Secondly,the feasibility of decoupling control based on dynamic inverse theory is discussed in detail,and the state feedback linearization method is used to decouple and linearize the system．Finally,linear control system techniques are applied to these linearization subsystems to synthesize and simulate．The simulation results have shown that this kind of control strategy can realize dynamic decoupling control among torque and suspension forces of the 5-degrees-of-freedom bearingless induction motor,and that the control system has good dynamic and static performance．展开更多
An adaptive current compensation control for a single-sided linear induction motor(SLIM) with nonlinear disturbance observer was developed. First, to maintain t-axis secondary component flux constant with consideratio...An adaptive current compensation control for a single-sided linear induction motor(SLIM) with nonlinear disturbance observer was developed. First, to maintain t-axis secondary component flux constant with consideration of the specially dynamic eddy-effect(DEE) of the SLIM, a instantaneously tracing compensation of m-axis current component was analyzed. Second,adaptive current compensation based on Taylor-discretization algorithm was proposed. Third, an effective kind of nonlinear disturbance observer(NDOB) was employed to estimate and compensate the undesired load vibrations, then the robustness of the control system could be guaranteed. Experimental verification of the feasibility of the proposed method for an SLIM control system was performed, and it showed that the proposed adaptive compensation scheme with NDOB could significantly promote speed dynamical response and minimize speed ripple under the conditions of external load coupled vibrations and unavoidable feedback control variables measured errors, i.e., current and speed.展开更多
Oxygen-free copper and pre-metalized graphite were brazed using CuNiSnP braze alloy by high frequency induction heating method. Interracial microstructures and reaction phases were analyzed by scanning electron micros...Oxygen-free copper and pre-metalized graphite were brazed using CuNiSnP braze alloy by high frequency induction heating method. Interracial microstructures and reaction phases were analyzed by scanning electron microscopy （SEM） and energy dispersive X-ray spectroscopy （EDS）. The strength and resistance of the joints were tested. It is found that when the brazing parameters are optimized, the structures of the joints are graphite/（Cu,Ni）/Ni（s.s）＋NixPy/Cu3P＋Cu（s.s） （including Sn）＋eutectic structures （Cu3P＋Ni3P＋Cu（s.s）/Cu （s.s）/Cu）. When the temperature increases to 750℃ or the holding time prolongs to 300 s, the eutectie structures disappear and the amount of Cu3P increases. The maximum shear strength of the joints is 5.2 MPa, which fracture at the interface of graphite and metallization. The resistance of the joints is no more than 5 mΩ.展开更多
基金supported by the National High-Tech Research and Development Program of China(2006AA12A106).
文摘A new incremental clustering framework is presented, the basis of which is the induction as inverted deduction. Induction is inherently risky because it is not truth-preserving. If the clustering is considered as an induction process, the key to build a valid clustering is to minimize the risk of clustering. From the viewpoint of modal logic, the clustering can be described as Kripke frames and Kripke models which are reflexive and symmetric. Based on the theory of modal logic, its properties can be described by system B in syntax. Thus, the risk of clustering can be calculated by the deduction relation of system B and proximity induction theorem described. Since the new proposed framework imposes no additional restrictive conditions of clustering algorithm, it is therefore a universal framework. An incremental clustering algorithm can be easily constructed by this framework from any given nonincremental clustering algorithm. The experiments show that the lower the a priori risk is, the more effective this framework is. It can be demonstrated that this framework is generally valid.
基金supported by the National Natural Science Foundation of China (No. 50176051)the State Key Development Program for Basic Research of China (No. 2000026306).
文摘The effect of diluted solution's magnetization on induction time and growth period of natural gas hydrate (NGH) has been investigated in quiescent reaction system at pressure of 4. 5 MPa and temperature of 274 K with SDS as surfactant, by using volume fixed and pressure falling method. Experimental results show that magnetization will have effect on the induction time of NGH. After magnetization with magnetic field intensity of 0.33 T, the induction time of NGH has been reduced to 47 min (average) from 99 min (average) in which there is no magnetization. On the other hand, the induction time has been prolonged after magnetization of the diluted solution with magnetic field intensity of 0.05 T, 0. 11 T, 0.22 T, 0.44T. Especially with magnetic field intensity of 0.11 T, the induction time had even been prolonged to 431min (average). The effect of magnetization on the growth period of NGH has not been found at the experimental condition.
基金Project(50490274) supported by the National Nature Science Foundation of China
文摘New method for handling roof of the base successive mining is proposed, which is induction caving in the roof. The key is that it is made certain to the station of the space-time in the induction caving roof, as the stress is released with the mining process. And applying the catastrophe theory, the influencing factors of induction caving roof are studied in the emptied areas, such as the mechanical property of the surrounding rock, the area of the gob,the scope and dimension of tensile stress. The results show that the key factor is the area of the gob to the method of the induction caving roof. Then according to the geology and the ore characteristic, the three dimension FEM mechanical model is built in Tongkeng Mine, the laws of the tensile stress are analyzed to the space and the time in the roof with the mining, then it is rational design to the mine step and time of the handing the roof.
基金Project supported by the Second Stage of Brain Korea 21 Projects
文摘Fault detection of an induction motor was carried out using the information of the stator current. After synchronizing the actual data, Fourier and wavelet transformations were adopted in order to obtain the sideband or detail value characteristics under healthy and various faulty operating conditions. The most reliable phase current among the three phase currents was selected using an approach that employs the fuzzy entropy measure. Data were trained with a neural network system, and the fault detection algorithm was verified using the unknown data. Results of the proposed approach based on Fourier and wavelet transformations indicate that the faults can be properly classified into six categories. The training error is 5.3×10-7, and the average test error is 0.103.
基金Project(2011DFA62240) supported by the International Scientific and Technological Cooperation Projects,ChinaProject(019945-SES6) supported by the European Union(EU)6th Framework Program UP-WIND Project,Denmark
文摘An analytic electromagnetic calculation method for doubly fed induction generator(DFIG) in wind turbine system was presented. Based on the operation principles, steady state equivalent circuit and basic equations of DFIG, the modeling for electromagnetic calculation of DFIG was proposed. The electromagnetic calculation of DFIG was divided into three steps: the magnetic flux calculation, parameters derivation and performance checks. For each step, the detailed numeric calculation formulas were all derived. Combining the calculation formulas, the whole electromagnetic calculation procedure was established, which consisted of three iterative calculation loops, including magnetic saturation coefficient, electromotive force and total output power. All of the electromagnetic and performance data of DIFG can be calculated conveniently by the established calculation procedure, which can be used to evaluate the new designed machine. A 1.5 MW DFIG designed by the proposed procedure was built, for which the whole type tests including no-load test, load test and temperature rising test were carried out. The test results have shown that the DFIG satisfies technical requirements and the test data fit well with the calculation results which prove the correctness of the presented calculation method.
基金Project supported by Faculty of Technology,Department of Electrical Engineering,University of Batna,Algeria
文摘This study presents analysis, control and comparison of three hybrid approaches for the direct torque control (DTC) of the dual star induction motor (DSIM) drive. Its objective consists of combining three different heuristic optimization techniques including PID-PSO, Fuzzy-PSO and GA-PSO to improve the DSIM speed controlled loop behavior. The GA and PSO algorithms are developed and implemented into MATLAB. As a result, fuzzy-PSO is the most appropriate scheme. The main performance of fuzzy-PSO is reducing high torque ripples, improving rise time and avoiding disturbances that affect the drive performance.
基金Project(SS2012AA04104)supported by High-tech Research and Development Program of China
文摘AC motors, especially the squirrel cage induction motors have the advantages of simple structure, good reliability and low cost. They are more suitable to be used as electrical dynamometers to provide dynamic load for bench test systems. But, the speed and torque of induction motors are not easy to be controlled accurately. In this work, an electrical dynamometer based on the induction motor is proposed. In order to get better control performance of torque and speed of induction motor, an improved direct torque control method(DTC) is also developed based on the space vector modulation(SVM) technique. The performance of the proposed dynamometer system is validated in the Matlab/Simulink platform. The simulation results show that the new dynamometer has good torque and stator flux response. And the torque and stator current ripples of it are reduced significantly compared with using the conventional DTC method.
文摘The experiment was performed on induction tetraploid of Haliotis discus hannai at two-cell stage through cell fusion with PEG treatment. In this paper, the orthogonal experiment of three factors and three levels [L9 （3^4）] was used. Three factors and three levels were molecular weight of PEG： 8 000, 6 000, 4 000 mol ·g^-1; PEG concentration： 45%, 50%, 55%; treatment duration time： 1, 2, 3 min, respectively. The results showed that the optimal pattern of three factors and three levels on inducing tetraploid of Haliotis discus hannai at two-cell stage through using PEG treatment were： molecular weight 4 000, concentration 55%, treatment duration time： 2 min. The highest tetraploid induction rate was 10.8% at embryo period. The three factors treatment sequence was treatment duration time→concentration→molecular weight.
基金Project(51575415)supported by the National Natural Science Foundation of ChinaProject(2016CFA077)supported by the Natural Science Foundation of Hubei Province of ChinaProject(2018-YS-026)supported by the Excellent Dissertation Cultivation Funds of Wuhan University of Technology,China。
文摘The evolution of temperature field of the continual motion induction cladding and the depth of heat affected zone are studied in this study.A three-dimensional finite element model for the point type continual induction cladding is established to investigate temperature distributions of fixed and motion induction cladding modes.The novel inductor is designed for cladding of curved surfaces.The modeling reliability is verified by the temperature measurements.The influence of process parameters on the maximum temperature and the generation and transfer of heat are studied.Quantitative calculation is performed to its melting rate to verify the temperature distribution and microstructures.The results show that a good metallurgical bond can be formed between the cladding layer and substrate.The melting rate gradually falls from the top of the cladding layer to the substrate,and the grain size in the substrate gradually rises.The heat affected zone is relatively small compared to integral heating.
基金Project supported by the Second Stage of Brain Korea 21 ProjectProject(2010-0020163) supported by Priority Research Centers Program through the National Research Foundation (NRF) of Korea funded by the Ministry of Education,Science and Technology
文摘A feature extraction and fusion algorithm was constructed by combining principal component analysis(PCA) and linear discriminant analysis(LDA) to detect a fault state of the induction motor.After yielding a feature vector with PCA and LDA from current signal that was measured by an experiment,the reference data were used to produce matching values.In a diagnostic step,two matching values that were obtained by PCA and LDA,respectively,were combined by probability model,and a faulted signal was finally diagnosed.As the proposed diagnosis algorithm brings only merits of PCA and LDA into relief,it shows excellent performance under the noisy environment.The simulation was executed under various noisy conditions in order to demonstrate the suitability of the proposed algorithm and showed more excellent performance than the case just using conventional PCA or LDA.
基金Project(50876116) supported by the National Natural Science Foundation of ChinaProject(2007CK3077) supported by Innovative Program of Hunan Science and Technology AgencyProject(1343-77225) supported by the Graduate School of Central South University
文摘In order to investigate Joule heating power,a three-dimensional finite element model(FEM) was developed to predict Joule heating power in the channels of double-loop inductor. The simulated results were compared with experimental data from low load trials for a 400 kW inductor. The results,such as power factor and Joule heating power,show reasonable correlation with experimental data,and Joule heating rate reaches the maximum at the corners and the minimum at the centre of the cross-section area. With increasing relative permeability of iron core,length of coils,current frequency and resistivity of metal melt,the power factor and Joule heating power change. It is concluded that current frequency,the resistivity and length of the coil play a critical role in determining the power factor and Joule heating power,whereas relative permeability of the magnetic core shows no significant influence on them.
基金Project (51175392) supported by the National Natural Science Foundation of ChinaProject (2014BAA012) supported by the Key Project of Hubei Province Science & Technology Pillar Program,ChinaProjects (2012-IV-067,2013-VII-020) supported by the Fundamental Research Funds for the Central Universities of China
文摘In order to investigate and predict the material properties of curved surface AISI 1045 steel component during spot continual induction hardening(SCIH),a 3D model for curved surface workpieces which coupled electromagnetic,temperature and phase transformation fields was built by finite element software ANSYS.A small size inductor and magnetizer were used in this model,which can move along the top surface of workpiece flexibly.The effect of inductor moving velocity and workpiece radius on temperature field was analyzed and the heating delay phenomenon was found through comparing the simulated results.The temperature field results indicate that the heating delay phenomenon is more obvious under high inductor moving velocity condition.This trend becomes more obvious if the workpiece radius becomes larger.The predictions of microstructure and micro-hardness distribution were also carried out via this model.The predicted results show that the inductor moving velocity is the dominated factor for the distribution of 100% martensite region and phase transformation region.The influencing factor of workpiece radius on 100% martensite region and phase transformation region distribution is obvious under relatively high inductor moving velocity but inconspicuous under relatively low inductor moving velocity.
基金Project(2015DFR50990-01)supported by International Cooperation Project of Ministry of Science and Technology of ChinaProjects(18JS060,18JS075)supported by the Shaanxi Key Laboratory of Nano-materials and Technology,China。
文摘Under various electromagnetic induction heating powers,different Al3Ti/Al composites were fabricated by in-situ synthesis method from aluminum and titanium fibers.Microstructures and particles distribution of the composites were examined by XRD,SEM and EDS.The results show that no other intermetallic compounds beside Al3Ti can be in-situ synthesized.Around the titanium fibers,the reaction zones and diffusion zones can be obviously found.Due to the stirring of the electromagnetic function,the formation of the micro-cracks inside the reaction zone was conducive to the peeling off of the Al3Ti particles,and ensures the continuous reaction between liquid aluminum and titanium fibers,as well as the diffusion of Al3Ti particles.At the same time,there were secondary splits of Al3Ti particles located in diffusion zones.Two-body abrasion test shows that with the increase of induction heating power,the wear rates of the composites reduced and the number of grooves decreased.
文摘With the rapid increase of wind farms,the grid code needs to be improved to meet the requirement of wind farms and enhance grid stability.Doubly-fed induction generators are largely used in wind turbines,but they are very sensitive to grid disturbances.The voltage swell can be caused by switching on capacitor banks or switching off large loads,which may result in the reversal of the power flow in the grid convertor;the current may flow from the grid into the DC link,which may step up DC voltage,and result in large faults of rotor currents and instantaneous power oscillation.The grid reactive compensation devices can not have the automatic swithing function after the low voltage fault,which will result in local reactive power surplus,so some wind power generators will retreat from the grid under high voltage protection.
基金Project supported by the LEB Research LaboratoryDepartment of Electrical Engineering,University of Batna 2, Algeria。
文摘The direct torque control of the dual star induction motor(DTC-DSIM) using conventional PI controllers is characterized by unsatisfactory performance, such as high ripples of torque and flux, and sensitivity to parametric variations. Among the most evoked control strategies adopted in this field to overcome these drawbacks presented in classical drive, it is worth mentioning the use of the second order sliding mode control(SOSMC) based on the super twisting algorithm(STA) combined with the fuzzy logic control(FSOSMC). In order to realize the optimal control performance, the FSOSMC parameters are adjusted using an optimization algorithm based on the genetic algorithm(GA). The performances of the envisaged control scheme, called G-FSOSMC, are investigated against G-SOSMC, G-PI and BBO-FSOSMC algorithms. The proposed controller scheme is efficient in reducing the torque and flux ripples, and successfully suppresses chattering. The effects of parametric uncertainties do not affect system performance.
基金The project supported by National Natural Science Foundation of China(81173127,81273581)
文摘OBJECTIVE CYP3A4 is one of the majordrug-metabolizing enzymes in humans and is responsible for the metabolism of over 50%of the clinically used drugs.Many drugs have been proved to induce the expression of CYP3A4,which usually causes drug-drug interactions and adverse reactions.The induction by numerous inducers shows significant interindividual differ ence but genetic factors can not totally explain or esti mate the difference.Recently,Epigenetic factors have been pointed out to contribute to that difference.Since histone methylation and acethylation are important parts of epigenetics,this study aimed to explore the role o active histone marks(H3K4me3,H3 acethylation)and inactive histone mark(H3K27me3)in rifampin-induced expression of CYP3A4 in LS174T cells.METHODS Chromatin immunoprecipitation(ChI P)assay was utilized to determine the levels of histone modifications in CYP3A4 promoter.RNA interference and Co-immunopre cipitation(Co-IP)assays were performed to determine the role of PXR and interactions between PXR and his tone methyltransferase/acetylase.RESULTS We found that the induction of CYP3A4 m RNA by rifampin treat ment(10μmol·L-1)in LS174T cells was accompanied by increased levels of H3K4me3 and H3 acethylation and decreased level H3K27me3 in CYP3A4 promoter Besides,enhanced recruitment of NCOA6,a coactivato of multiple nuclear receptors and transcription factors that is associated with H3K4 methyltransferase,and p300,a histone acetylase,were observed in CYP3A4promoter.To reveal the relationship between PXR activa tion and histone methylation/acethylation,gene silence was performed by sh RNA transfection.Knockdown o PXR expression not only removed the induction o CYP3A4,but also eliminated the recruitment of NCOA6and p300 and the decreased levels of H3K4me3 and H3acethylation in CYP3A4 promoter.Moreover,co-immuno cipitation(Co-IP)assay showed that interactions between PXR and NCOA6/p300 were occurred upon rifampin stimulation.CONCLUSION Histone methylation and acethylation contribute to rifampin-mediated induction of CYP3A4 through the interactions between PXR and histone methyltransferase/acetylase.
基金Supported by National Natural Science Foundation of P.R.China(50575099,60674095)
文摘A 5-degrees-of-freedom bearingless induction motor is a multi-variable,nonlinear and strong-coupled system．In order to achieve rotor suspension and operation steadily,it is necessary to realize dynamic decoupling control among torque and suspension forces．In the paper,a method based on α-th order inverse system theory is used to study dynamic decoupling control．Firstly,the working principles of a 3-degrees-of-freedom magnetic bearing and a 2-degrees-of-freedom bearinglees induction motor are analyzed, the radial-axial force equations of 3-degrees-of-freedom magnetic bearing,the electromagnetic torque equation and radial force equations of the 2-degrees-of-freedom bearingless induction motor are given,and then the state equations of the 5-degrees-of-freedom bearingless induction motor are set up．Secondly,the feasibility of decoupling control based on dynamic inverse theory is discussed in detail,and the state feedback linearization method is used to decouple and linearize the system．Finally,linear control system techniques are applied to these linearization subsystems to synthesize and simulate．The simulation results have shown that this kind of control strategy can realize dynamic decoupling control among torque and suspension forces of the 5-degrees-of-freedom bearingless induction motor,and that the control system has good dynamic and static performance．
基金Project(114601034)supported by the Scholarship Award for Excellent Doctoral Students Granted by the Ministry of Education of ChinaProject(61273158)supported by the National Natural Science Foundation of China
文摘An adaptive current compensation control for a single-sided linear induction motor(SLIM) with nonlinear disturbance observer was developed. First, to maintain t-axis secondary component flux constant with consideration of the specially dynamic eddy-effect(DEE) of the SLIM, a instantaneously tracing compensation of m-axis current component was analyzed. Second,adaptive current compensation based on Taylor-discretization algorithm was proposed. Third, an effective kind of nonlinear disturbance observer(NDOB) was employed to estimate and compensate the undesired load vibrations, then the robustness of the control system could be guaranteed. Experimental verification of the feasibility of the proposed method for an SLIM control system was performed, and it showed that the proposed adaptive compensation scheme with NDOB could significantly promote speed dynamical response and minimize speed ripple under the conditions of external load coupled vibrations and unavoidable feedback control variables measured errors, i.e., current and speed.
基金Project(50705022) supported by the National Natural Science Foundation of ChinaProject supported by the Program for New Century Excellent Talents in University
文摘Oxygen-free copper and pre-metalized graphite were brazed using CuNiSnP braze alloy by high frequency induction heating method. Interracial microstructures and reaction phases were analyzed by scanning electron microscopy （SEM） and energy dispersive X-ray spectroscopy （EDS）. The strength and resistance of the joints were tested. It is found that when the brazing parameters are optimized, the structures of the joints are graphite/（Cu,Ni）/Ni（s.s）＋NixPy/Cu3P＋Cu（s.s） （including Sn）＋eutectic structures （Cu3P＋Ni3P＋Cu（s.s）/Cu （s.s）/Cu）. When the temperature increases to 750℃ or the holding time prolongs to 300 s, the eutectie structures disappear and the amount of Cu3P increases. The maximum shear strength of the joints is 5.2 MPa, which fracture at the interface of graphite and metallization. The resistance of the joints is no more than 5 mΩ.
