This paper discusses the influence of Sb/In ratio on the transport properties and crystal quality of the 200 nm InAs_(x)Sb_(1-x)thin film.The Sb content of InAs_(x)Sb_(1-x)thin film in all samples was verified by HRXR...This paper discusses the influence of Sb/In ratio on the transport properties and crystal quality of the 200 nm InAs_(x)Sb_(1-x)thin film.The Sb content of InAs_(x)Sb_(1-x)thin film in all samples was verified by HRXRD of the symmetrical 004 reflections and asymmetrical 115 reflections.The calculation results show that the Sb component was 0.6 in the InAs_(x)Sb_(1-x)thin film grown under the conditions of Sb/In ratio of 6 and As/In ratio of 3,which has the highest electron mobility(28560 cm^(2)/V·s)at 300 K.At the same time,the influence ofⅤ/Ⅲratio on the transport properties and crystal quality of Al_(0.2)In_(0.8)Sb/InAs_(x)Sb_(1-x)quantum well heterostructures also has been investigated.As a result,the Al_(0.2)In_(0.8)Sb/InAs_(0.4)Sb_(0.6)quantum well heterostructure with a channel thickness of 30 nm grown under the conditions of Sb/In ratio of 6 and As/In ratio of 3 has a maximum electron mobility of 28300 cm^(2)/V·s and a minimum RMS roughness of 0.68 nm.Through optimizing the growth conditions,our samples have higher electron mobility and smoother surface morphology.展开更多
The syndrome a posteriori probability of the log-likelihood ratio of intercepted codewords is used to develop an algorithm that recognizes the polar code length and generator matrix of the underlying polar code.Based ...The syndrome a posteriori probability of the log-likelihood ratio of intercepted codewords is used to develop an algorithm that recognizes the polar code length and generator matrix of the underlying polar code.Based on the encoding structure,three theorems are proved,two related to the relationship between the length and rate of the polar code,and one related to the relationship between frozen-bit positions,information-bit positions,and codewords.With these three theorems,polar codes can be quickly reconstruced.In addition,to detect the dual vectors of codewords,the statistical characteristics of the log-likelihood ratio are analyzed,and then the information-and frozen-bit positions are distinguished based on the minimumerror decision criterion.The bit rate is obtained.The correctness of the theorems and effectiveness of the proposed algorithm are validated through simulations.The proposed algorithm exhibits robustness to noise and a reasonable computational complexity.展开更多
This study presents a significant advancement in the vibration analysis of functionally graded sandwich plates with auxetic cores by introducing a general viscoelastic foundation model that more accurately reflects th...This study presents a significant advancement in the vibration analysis of functionally graded sandwich plates with auxetic cores by introducing a general viscoelastic foundation model that more accurately reflects the complex interactions between the plate and the foundation.The novelty of this study is that the proposed viscoelastic foundation model incorporates elastic and damping effects in both the Winkler and Pasternak layers.To develop the theoretical framework for this analysis,the higher-order shear deformation theory is employed,while Hamilton's principle is used to derive the governing equations of motion.The closed-form solution is used to determine the damped vibration behaviors of the sandwich plates.The precision and robustness of the proposed mathematical model are validated through several comparison studies with existing numerical results.A detailed parametric study is conducted to investigate the influence of various parameters,including the elastic and damping coefficients of the foundation,the material gradation,and the properties of the auxetic core on the vibration behavior of the plates.The numerical results provide new insights into the vibration characteristics of sandwich plates with auxetic cores resting on viscoelastic foundation,highlighting the significant role of the two damping coefficients and auxetic cores in the visco-vibration behavior of the plates.展开更多
A high-speed train travelling from the open air into a narrow tunnel will cause the“sonic boom”at tunnel exit.When the maglev train’s speed reaches 600 km/h,the train-tunnel aerodynamic effect is intensified,so a n...A high-speed train travelling from the open air into a narrow tunnel will cause the“sonic boom”at tunnel exit.When the maglev train’s speed reaches 600 km/h,the train-tunnel aerodynamic effect is intensified,so a new mitigation method is urgently expected to be explored.This study proposed a novel asymptotic linear method(ALM)for micro pressure wave(MPW)mitigation to achieve a constant gradient of initial c ompression waves(ICWs),via a study with various open ratios on hoods.The properties of ICWs and MPWs under various open ratios of hoods were analyzed.The results show that as the open ratio increases,the MPW amplitude at the tunnel exit initially decreases before rising.At the open ratio of 2.28%,the slope of the ICW curve is linearly coincident with a supposed straight line in the ALM,which further reduces the MPW amplitude by 26.9%at 20 m and 20.0%at 50 m from the exit,as compared to the unvented hood.Therefore,the proposed method effectively mitigates MPW and quickly determines the upper limit of alleviation for the MPW amplitude at a fixed train-tunnel operation condition.All achievements provide a ne w potential measure for the adaptive design of tunnel hoods.展开更多
In order to study the cross-linking density and aging constitutive relationship of HTPB coating during storage,the thermal accelerated aging tests at 0%,3%,6%and 9%prestrains were carried out.The crosslinking density ...In order to study the cross-linking density and aging constitutive relationship of HTPB coating during storage,the thermal accelerated aging tests at 0%,3%,6%and 9%prestrains were carried out.The crosslinking density of HTPB coating at different aging stages were tested using low-field^1 H NMR and the variation of cross-linking density was analyzed.The aging model of cross-linking density considering the chemical aging and the physical stretching factors was established.The uniaxial tensile tests were carried out on HTPB coating at different aging stages and the cross-linking density was introduced into Ogden hyperelastic constitutive model as a characterization parameter of correction coefficient.Combined with uniaxial tensile test results,a prestrain aging constitutive model of HTPB coating was established.The results show that the cross-linking density of HTPB coating increases rapidly at first and then slowly with the increase of thermal accelerated aging time without prestrain.Under prestrain conditions,the crosslinking density of HTPB coating decreases at the early stage,and increases rapidly at first and then slowly at the middle and late stages of thermal accelerated aging.The correlation coefficients of aging model of cross-linking density and aging constitutive model with test results are R>0.9500 and R>0.9900 respectively,which can be used to accurately describe the cross-linking density and aging constitutive relationship of HTPB coating under prestrain accelerated thermal aging conditions.展开更多
Von Willebrand factor(VWF)is a multimeric plasma glycoprotein that captures platelets to the sites of vascular injury.The adhesive activity of VWF is highly dependent on the size of VWF.Hemodynamic force converts coil...Von Willebrand factor(VWF)is a multimeric plasma glycoprotein that captures platelets to the sites of vascular injury.The adhesive activity of VWF is highly dependent on the size of VWF.Hemodynamic force converts coiled VWF to linear form,exposing the scissile bond Y1605-M1606 within A2 domain.ADAMTS13(A Disintegrin and Metalloprotease with a ThromboSpondin type 1 motif 13)inhibits excessive platelet aggregation by specifically cleaving the cryptic peptide bond of VWF to regulate its size.Deficiency of ADAMTS13 activity,caused by either mutations or by inhibitory autoantibody,results in the accumulation of ultra-large VWF in plasma,leading to excessive platelet aggregation and disseminated VWF/plateletrich thrombus formation,which is the characteristic of thrombotic thrombocytopenic purpura(TTP).Previous studies showed that,circulating ADAMTS13 generally adopts a closed conformation by the interaction of its TSP8-CUB domain and Spacer domain.This auto-inhibition is relieved when VWF D4-CK domain binds to C-termini of ADAMTS13 disrupting the interaction between TSP8-CUB domain and Spacer domain.As a result,ADAMTS13 changes into an open conformation,exposing more VWF binding sites.Open conformation of ADAMTS13 is considered as a hallmark of acute acquired TTP.However,the dynamic process of conformational transition of ADAMTS13 has not been fully understood.Besides,there are variable natural truncations of ADAMTS13 in circulation,including the truncations lacking the metalloprotease domain.The role of these truncations without enzyme activity in hemostasis is still unknown.Given that there are multiple binding sites in both VWF and open ADAMTS13,we hypothesize that open ADAMTS13 promotes the cross-linking of VWF.Atomic force microscopy(AFM)was employed to prove our hypothesis at single molecule level.The N-termini of ADAMTS13 was immobilized on the polystyrene surface,while the C-termini was stretched by AFM tip.The force required for unfolding was measured and the molecular length increment was obtained by fitting the data with worm-like chain model.In addition,both the polystyrene surface and cantilever were coated with VWF,the adhesion frequency of VWF-VWF interaction were measured in the presence or absence of soluble DisC(a ADAMTS13 truncation that lacks the metalloprotease domain).Our results show that,the rupture force required for ADAMTS13 unfolding is^22 pN.The length increment is mainly in the range of 0-50 nm,and the peak value is 22.6±1.8 nm,consistent with the predicted value of homologous modeling(~27 nm)in literature.The adhesion frequency of two VWF molecules increased in the presence of DisC in a concentration-dependent manner.With or without DisC in solution,the rupture force of the VWF molecules was^20 pN.The bond lifetime of two VWF declined with force increasing,the characteristic of a'slip'bond.In contrast,in the presence of DisC,the bond lifetime firstly increased as force increasing and then decreased as force increasing further,which is the characteristic of a'catch-slip'bond.The distinct patterns of bond lifetime vs force in the presence and absence of DisC indicate that DisC promotes the cross-linking of two VWF molecules.Our data suggest that open ADAMTS13 stabilizes the network of VWF multimers and promotes platelet adhesion.展开更多
Although body mass index(BMI)is widely used as a simple tool to assess obesity,it has certain limitations and inaccuracies.It is known that visceral adipose tissue is closely related to cardiometabolic risks and all-c...Although body mass index(BMI)is widely used as a simple tool to assess obesity,it has certain limitations and inaccuracies.It is known that visceral adipose tissue is closely related to cardiometabolic risks and all-cause mortality;however,precise measurement methods for visceral fat(magnetic resonance imaging and computed tomography)cannot be widely used.Thus,simple but accurate alternatives are valuable.Studies have shown that waist circumference-to-height ratio(WHtR)might be a superior and more accurate variable in assessing central or visceral adiposity as well as predicting risks of diabetes and other cardiometabolic diseases.Furthermore,WHtR cutoff values can be consistent across different races,age,and genders,making it a universal metric worth promoting and applying.展开更多
Background Water deficit is an important problem in agricultural production in arid regions.With the advent of wholly mechanized technology for cotton planting in Xinjiang,it is important to determine which planting m...Background Water deficit is an important problem in agricultural production in arid regions.With the advent of wholly mechanized technology for cotton planting in Xinjiang,it is important to determine which planting mode could achieve high yield,fiber quality and water use efficiency(WUE).This study aimed to explore if chemical topping affected cotton yield,quality and water use in relation to row configuration and plant densities.Results Experiments were carried out in Xinjiang China,in 2020 and 2021 with two topping method,manual topping and chemical topping,two plant densities,low and high,and two row configurations,i.e.,76 cm equal rows and 10+66 cm narrow-wide rows,which were commonly applied in matching harvest machine.Chemical topping increased seed cotton yield,but did not affect cotton fiber quality comparing to traditional manual topping.Under equal row spacing,the WUE in higher density was 62.4%higher than in the lower one.However,under narrow-wide row spacing,the WUE in lower density was 53.3%higher than in higher one(farmers’practice).For machine-harvest cotton in Xinjiang,the optimal row configuration and plant density for chemical topping was narrow-wide rows with 15 plants m-2 or equal rows with 18 plants m-2.Conclusion The plant density recommended in narrow-wide rows was less than farmers’practice and the density in equal rows was moderate with local practice.Our results provide new knowledge on optimizing agronomic managements of machine-harvested cotton for both high yield and water efficient.展开更多
SiC aerogel presents several advantageous features like lightweight and high temperature resistance when applied as microwave absorbing material.In this paper,SiC aerogel was prepared eventually followed by the sol-ge...SiC aerogel presents several advantageous features like lightweight and high temperature resistance when applied as microwave absorbing material.In this paper,SiC aerogel was prepared eventually followed by the sol-gel and carbonization reduction process.The results showed that the effective electromagnetic microwave absorption capacity of SiC aerogel was highly increased after being pyrolyzed at 1500℃,which presented a minimum reflection loss value of-57.80 dB at 3.10 mm and 9.86 GHz.Besides,the electromagnetic parameters of SiC aerogel with different paraffin ratios were discussed as well as the varying electromagnetic microwave absorption performances.The minimum reflection loss value first rose then fell as the SiC/paraffin ratio increased,which demonstrated the importance of SiC content.This study establishes the theoretical foundation for the subsequent functional application of SiC aerogel.展开更多
The macroscopic mechanical properties of rocks are significantly influenced by their microstructure.As a material bonded by mineral grains,the grain morphology of crystalline rock is the primary factor influencing the...The macroscopic mechanical properties of rocks are significantly influenced by their microstructure.As a material bonded by mineral grains,the grain morphology of crystalline rock is the primary factor influencing the strength.However,most strength criteria neglect the strength variations caused by different grain characteristics in rocks.Furthermore,the traditional linear criteria tend to overestimate tensile strength and exhibit apex singularity.To address these shortcomings,a piecewise strength criterion that considers the grain size effect has been proposed.A part of an ellipse was employed to construct the envelope of the tensive-shear region on the meridian plane,to accurately reproduce the low tensile-compressive strength ratio.Based on the analysis of experimental data,both linear and exponential modification functions that account for grain size effects were integrated into the proposed criterion.The corresponding finite element algorithm has been implemented.The accuracy and applicability of the proposed criterion were validated by comparing with the experimental data.展开更多
This article introduces a method of achieving high polarization extinction ratio using a subwavelength grating structure on a lithium niobate thin film platform,and the chip is formed on the surface of the lithium nio...This article introduces a method of achieving high polarization extinction ratio using a subwavelength grating structure on a lithium niobate thin film platform,and the chip is formed on the surface of the lithium niobate thin film.The chip,with a length of just 20μm,achieved a measured polarization extinction ratio of 29 dB at 1550 nm wavelength.This progress not only proves the possibility of achieving a high extinction ratio on a lithium niobate thin film platform,but also offers important technical references for future work on polarization beam splitters,integrated fiber optic gyroscopes,and so on.展开更多
基金Supported by the Natural Science Basic Research Program of Shaanxi Province(2023-JC-QN-0758)Shaanxi University of Science and Technology Research Launch Project(2020BJ-26)Doctoral Research Initializing Fund of Hebei University of Science and Technology,China(1181476).
文摘This paper discusses the influence of Sb/In ratio on the transport properties and crystal quality of the 200 nm InAs_(x)Sb_(1-x)thin film.The Sb content of InAs_(x)Sb_(1-x)thin film in all samples was verified by HRXRD of the symmetrical 004 reflections and asymmetrical 115 reflections.The calculation results show that the Sb component was 0.6 in the InAs_(x)Sb_(1-x)thin film grown under the conditions of Sb/In ratio of 6 and As/In ratio of 3,which has the highest electron mobility(28560 cm^(2)/V·s)at 300 K.At the same time,the influence ofⅤ/Ⅲratio on the transport properties and crystal quality of Al_(0.2)In_(0.8)Sb/InAs_(x)Sb_(1-x)quantum well heterostructures also has been investigated.As a result,the Al_(0.2)In_(0.8)Sb/InAs_(0.4)Sb_(0.6)quantum well heterostructure with a channel thickness of 30 nm grown under the conditions of Sb/In ratio of 6 and As/In ratio of 3 has a maximum electron mobility of 28300 cm^(2)/V·s and a minimum RMS roughness of 0.68 nm.Through optimizing the growth conditions,our samples have higher electron mobility and smoother surface morphology.
基金supported by the National Natural Science Foundation of China(62371465)Taishan Scholar Project of Shandong Province(ts201511020)the Chinese National Key Laboratory of Science and Technology on Information System Security(6142111190404).
文摘The syndrome a posteriori probability of the log-likelihood ratio of intercepted codewords is used to develop an algorithm that recognizes the polar code length and generator matrix of the underlying polar code.Based on the encoding structure,three theorems are proved,two related to the relationship between the length and rate of the polar code,and one related to the relationship between frozen-bit positions,information-bit positions,and codewords.With these three theorems,polar codes can be quickly reconstruced.In addition,to detect the dual vectors of codewords,the statistical characteristics of the log-likelihood ratio are analyzed,and then the information-and frozen-bit positions are distinguished based on the minimumerror decision criterion.The bit rate is obtained.The correctness of the theorems and effectiveness of the proposed algorithm are validated through simulations.The proposed algorithm exhibits robustness to noise and a reasonable computational complexity.
基金the funding of the Deanship of Graduate Studies and Scientific Research,Jazan University,Saudi Arabia,through project number:RG24-M027.
文摘This study presents a significant advancement in the vibration analysis of functionally graded sandwich plates with auxetic cores by introducing a general viscoelastic foundation model that more accurately reflects the complex interactions between the plate and the foundation.The novelty of this study is that the proposed viscoelastic foundation model incorporates elastic and damping effects in both the Winkler and Pasternak layers.To develop the theoretical framework for this analysis,the higher-order shear deformation theory is employed,while Hamilton's principle is used to derive the governing equations of motion.The closed-form solution is used to determine the damped vibration behaviors of the sandwich plates.The precision and robustness of the proposed mathematical model are validated through several comparison studies with existing numerical results.A detailed parametric study is conducted to investigate the influence of various parameters,including the elastic and damping coefficients of the foundation,the material gradation,and the properties of the auxetic core on the vibration behavior of the plates.The numerical results provide new insights into the vibration characteristics of sandwich plates with auxetic cores resting on viscoelastic foundation,highlighting the significant role of the two damping coefficients and auxetic cores in the visco-vibration behavior of the plates.
基金Project(24A0006)supported by the Key Project of Scientific Research Fund of Hunan Provincial Department of Education,ChinaProject(2024JJ5430)supported by the Natural Science Foundation of Hunan Province,ChinaProjects(2024JK2045,2023RC3061)supported by the Science and Technology Innovation Program of Hunan Province,China。
文摘A high-speed train travelling from the open air into a narrow tunnel will cause the“sonic boom”at tunnel exit.When the maglev train’s speed reaches 600 km/h,the train-tunnel aerodynamic effect is intensified,so a new mitigation method is urgently expected to be explored.This study proposed a novel asymptotic linear method(ALM)for micro pressure wave(MPW)mitigation to achieve a constant gradient of initial c ompression waves(ICWs),via a study with various open ratios on hoods.The properties of ICWs and MPWs under various open ratios of hoods were analyzed.The results show that as the open ratio increases,the MPW amplitude at the tunnel exit initially decreases before rising.At the open ratio of 2.28%,the slope of the ICW curve is linearly coincident with a supposed straight line in the ALM,which further reduces the MPW amplitude by 26.9%at 20 m and 20.0%at 50 m from the exit,as compared to the unvented hood.Therefore,the proposed method effectively mitigates MPW and quickly determines the upper limit of alleviation for the MPW amplitude at a fixed train-tunnel operation condition.All achievements provide a ne w potential measure for the adaptive design of tunnel hoods.
基金supported by the National Defense Pre-Research Foundation of China[grant number ZS2015070132A12002]。
文摘In order to study the cross-linking density and aging constitutive relationship of HTPB coating during storage,the thermal accelerated aging tests at 0%,3%,6%and 9%prestrains were carried out.The crosslinking density of HTPB coating at different aging stages were tested using low-field^1 H NMR and the variation of cross-linking density was analyzed.The aging model of cross-linking density considering the chemical aging and the physical stretching factors was established.The uniaxial tensile tests were carried out on HTPB coating at different aging stages and the cross-linking density was introduced into Ogden hyperelastic constitutive model as a characterization parameter of correction coefficient.Combined with uniaxial tensile test results,a prestrain aging constitutive model of HTPB coating was established.The results show that the cross-linking density of HTPB coating increases rapidly at first and then slowly with the increase of thermal accelerated aging time without prestrain.Under prestrain conditions,the crosslinking density of HTPB coating decreases at the early stage,and increases rapidly at first and then slowly at the middle and late stages of thermal accelerated aging.The correlation coefficients of aging model of cross-linking density and aging constitutive model with test results are R>0.9500 and R>0.9900 respectively,which can be used to accurately describe the cross-linking density and aging constitutive relationship of HTPB coating under prestrain accelerated thermal aging conditions.
基金supported by National Natural Science Foundation of China ( 31500759,31771012)the Guangzhou Science Technology Program ( 201707010062)
文摘Von Willebrand factor(VWF)is a multimeric plasma glycoprotein that captures platelets to the sites of vascular injury.The adhesive activity of VWF is highly dependent on the size of VWF.Hemodynamic force converts coiled VWF to linear form,exposing the scissile bond Y1605-M1606 within A2 domain.ADAMTS13(A Disintegrin and Metalloprotease with a ThromboSpondin type 1 motif 13)inhibits excessive platelet aggregation by specifically cleaving the cryptic peptide bond of VWF to regulate its size.Deficiency of ADAMTS13 activity,caused by either mutations or by inhibitory autoantibody,results in the accumulation of ultra-large VWF in plasma,leading to excessive platelet aggregation and disseminated VWF/plateletrich thrombus formation,which is the characteristic of thrombotic thrombocytopenic purpura(TTP).Previous studies showed that,circulating ADAMTS13 generally adopts a closed conformation by the interaction of its TSP8-CUB domain and Spacer domain.This auto-inhibition is relieved when VWF D4-CK domain binds to C-termini of ADAMTS13 disrupting the interaction between TSP8-CUB domain and Spacer domain.As a result,ADAMTS13 changes into an open conformation,exposing more VWF binding sites.Open conformation of ADAMTS13 is considered as a hallmark of acute acquired TTP.However,the dynamic process of conformational transition of ADAMTS13 has not been fully understood.Besides,there are variable natural truncations of ADAMTS13 in circulation,including the truncations lacking the metalloprotease domain.The role of these truncations without enzyme activity in hemostasis is still unknown.Given that there are multiple binding sites in both VWF and open ADAMTS13,we hypothesize that open ADAMTS13 promotes the cross-linking of VWF.Atomic force microscopy(AFM)was employed to prove our hypothesis at single molecule level.The N-termini of ADAMTS13 was immobilized on the polystyrene surface,while the C-termini was stretched by AFM tip.The force required for unfolding was measured and the molecular length increment was obtained by fitting the data with worm-like chain model.In addition,both the polystyrene surface and cantilever were coated with VWF,the adhesion frequency of VWF-VWF interaction were measured in the presence or absence of soluble DisC(a ADAMTS13 truncation that lacks the metalloprotease domain).Our results show that,the rupture force required for ADAMTS13 unfolding is^22 pN.The length increment is mainly in the range of 0-50 nm,and the peak value is 22.6±1.8 nm,consistent with the predicted value of homologous modeling(~27 nm)in literature.The adhesion frequency of two VWF molecules increased in the presence of DisC in a concentration-dependent manner.With or without DisC in solution,the rupture force of the VWF molecules was^20 pN.The bond lifetime of two VWF declined with force increasing,the characteristic of a'slip'bond.In contrast,in the presence of DisC,the bond lifetime firstly increased as force increasing and then decreased as force increasing further,which is the characteristic of a'catch-slip'bond.The distinct patterns of bond lifetime vs force in the presence and absence of DisC indicate that DisC promotes the cross-linking of two VWF molecules.Our data suggest that open ADAMTS13 stabilizes the network of VWF multimers and promotes platelet adhesion.
基金supported by the“1·3·5 Project”for Disciplines of Excellence,West China Hospital,Sichuan University,China(ZYGD18017)。
文摘Although body mass index(BMI)is widely used as a simple tool to assess obesity,it has certain limitations and inaccuracies.It is known that visceral adipose tissue is closely related to cardiometabolic risks and all-cause mortality;however,precise measurement methods for visceral fat(magnetic resonance imaging and computed tomography)cannot be widely used.Thus,simple but accurate alternatives are valuable.Studies have shown that waist circumference-to-height ratio(WHtR)might be a superior and more accurate variable in assessing central or visceral adiposity as well as predicting risks of diabetes and other cardiometabolic diseases.Furthermore,WHtR cutoff values can be consistent across different races,age,and genders,making it a universal metric worth promoting and applying.
基金Key Research and Development Program of Xinjiang(2022B02001-1)National Natural Science Foundation of China(42105172,41975146).
文摘Background Water deficit is an important problem in agricultural production in arid regions.With the advent of wholly mechanized technology for cotton planting in Xinjiang,it is important to determine which planting mode could achieve high yield,fiber quality and water use efficiency(WUE).This study aimed to explore if chemical topping affected cotton yield,quality and water use in relation to row configuration and plant densities.Results Experiments were carried out in Xinjiang China,in 2020 and 2021 with two topping method,manual topping and chemical topping,two plant densities,low and high,and two row configurations,i.e.,76 cm equal rows and 10+66 cm narrow-wide rows,which were commonly applied in matching harvest machine.Chemical topping increased seed cotton yield,but did not affect cotton fiber quality comparing to traditional manual topping.Under equal row spacing,the WUE in higher density was 62.4%higher than in the lower one.However,under narrow-wide row spacing,the WUE in lower density was 53.3%higher than in higher one(farmers’practice).For machine-harvest cotton in Xinjiang,the optimal row configuration and plant density for chemical topping was narrow-wide rows with 15 plants m-2 or equal rows with 18 plants m-2.Conclusion The plant density recommended in narrow-wide rows was less than farmers’practice and the density in equal rows was moderate with local practice.Our results provide new knowledge on optimizing agronomic managements of machine-harvested cotton for both high yield and water efficient.
基金supported by various grants including the Guangdong Basic and Applied Basic Research Foundation(Grant Nos.2021A1515111155 and 2022A1515111200)Basic Research Programs of Taicang(Grant Nos.TC2023JC03 and TC2022JC08)+2 种基金Natural Science Foundation of Shaanxi Province(Grant No.2023JC-QN-0380)Nantong Natural Science Foundation(Grant No.JC2023011)Shanghai Central Guidance Fund for Local Science and Technology Development(Grant No.YDZX20233100004009)。
文摘SiC aerogel presents several advantageous features like lightweight and high temperature resistance when applied as microwave absorbing material.In this paper,SiC aerogel was prepared eventually followed by the sol-gel and carbonization reduction process.The results showed that the effective electromagnetic microwave absorption capacity of SiC aerogel was highly increased after being pyrolyzed at 1500℃,which presented a minimum reflection loss value of-57.80 dB at 3.10 mm and 9.86 GHz.Besides,the electromagnetic parameters of SiC aerogel with different paraffin ratios were discussed as well as the varying electromagnetic microwave absorption performances.The minimum reflection loss value first rose then fell as the SiC/paraffin ratio increased,which demonstrated the importance of SiC content.This study establishes the theoretical foundation for the subsequent functional application of SiC aerogel.
基金Project(2023YFC2907403)supported by the National Key R&D Program of ChinaProject(52074021)supported by the National Natural Science Foundation of China+1 种基金Project(2242045)supported by Beijing Natural Science Foundation,ChinaProject(ZD202216)supported by the Beijing Association of Higher Education,China。
文摘The macroscopic mechanical properties of rocks are significantly influenced by their microstructure.As a material bonded by mineral grains,the grain morphology of crystalline rock is the primary factor influencing the strength.However,most strength criteria neglect the strength variations caused by different grain characteristics in rocks.Furthermore,the traditional linear criteria tend to overestimate tensile strength and exhibit apex singularity.To address these shortcomings,a piecewise strength criterion that considers the grain size effect has been proposed.A part of an ellipse was employed to construct the envelope of the tensive-shear region on the meridian plane,to accurately reproduce the low tensile-compressive strength ratio.Based on the analysis of experimental data,both linear and exponential modification functions that account for grain size effects were integrated into the proposed criterion.The corresponding finite element algorithm has been implemented.The accuracy and applicability of the proposed criterion were validated by comparing with the experimental data.
基金Supported by Beijing Natural Science Foundation(4242062)and the Youth Innovation Promotion Association,CAS(2021108)。
文摘This article introduces a method of achieving high polarization extinction ratio using a subwavelength grating structure on a lithium niobate thin film platform,and the chip is formed on the surface of the lithium niobate thin film.The chip,with a length of just 20μm,achieved a measured polarization extinction ratio of 29 dB at 1550 nm wavelength.This progress not only proves the possibility of achieving a high extinction ratio on a lithium niobate thin film platform,but also offers important technical references for future work on polarization beam splitters,integrated fiber optic gyroscopes,and so on.
