Aseries of [(Fe_(0.6)Co_(0.2)Ni_(0.2))_(0.75-0.03x)B_(0.2)Si_(0.05+0.03x)]_(96)Nb_(4) amorphous alloy composite coatings were prepared by adjusting the silicon content(x=0,1,2,3,4,5,and 6)and their microstructures and...Aseries of [(Fe_(0.6)Co_(0.2)Ni_(0.2))_(0.75-0.03x)B_(0.2)Si_(0.05+0.03x)]_(96)Nb_(4) amorphous alloy composite coatings were prepared by adjusting the silicon content(x=0,1,2,3,4,5,and 6)and their microstructures and tribological properties were investigated by laser cladding technique.Additionally,the effect of Si on the glass forming ability(GFA)of the layers was understood.Results show that an appropriate Si content can refine the microstructure of the FeCoNiBSiNb laser cladding layers and improve the mechanical and tribological properties.The hardness of the coating layer increases monotonically with the Si content.At the Si content of 4.8at%(x=0),the coating layer exhibits a relatively low hardness(734.2HV 0.1).Conversely,at the silicon content of 13.44at%(x=3),the coating layer exhibits the highest hardness(1106HV 0.1).The non-crystalline content and tensile strength exhibit an initial increase,followed by a subsequent decrease.At x=2,the coating exhibits its maximum fracture strength(2880 MPa).However,when x>2,the fracture strength of the coating decreases with an increase in x.Conversely,with an increase in Si content,the wear volume loss initially decreases and then increases.At a Si content of 10.56at%(x=2),the coating exhibits the highest non-crystalline content(42%),the highest tensile strength(2880 MPa),and the most favorable dry friction performance.展开更多
Grey mathematics is the mathematical foundation of the grey system theory. Recently, some important results have been achieved. In order to accelerate the development of grey mathematics, the results are summarized an...Grey mathematics is the mathematical foundation of the grey system theory. Recently, some important results have been achieved. In order to accelerate the development of grey mathematics, the results are summarized and redefined. This paper includes the fundamental definitions and calculation rules of the grey hazy set, grey number, grey matrix and grey function. Grey mathematics includes four types of operation, i.e. the grey operation, the whitened operation, the covered operation and the only potential true operation. According to its intrinsic quality, the covered operation, which differs from the interval one, is called as the whole-proximate calculation that means the proximate calculation spreads through the whole range of the covered set of every grey number, and we confirm that it may be a new branch of computational or applied mathematics. The overview should develop the grey system theory and grey mathematics.展开更多
In order to improve the strength and stiffness of shield cutterhead, the method of fuzzy mathematics theory in combination with the finite element analysis is adopted. An optimal design model of structural parameters ...In order to improve the strength and stiffness of shield cutterhead, the method of fuzzy mathematics theory in combination with the finite element analysis is adopted. An optimal design model of structural parameters for shield cutterhead is formulated,based on the complex engineering technical requirements. In the model, as the objective function of the model is a composite function of the strength and stiffness, the response surface method is applied to formulate the approximate function of objective function in order to reduce the solution scale of optimal problem. A multi-objective genetic algorithm is used to solve the cutterhead structure design problem and the change rule of the stress-strain with various structural parameters as well as their optimal values were researched under specific geological conditions. The results show that compared with original cutterhead structure scheme, the obtained optimal scheme of the cutterhead structure can greatly improve the strength and stiffness of the cutterhead, which can be seen from the reduction of its maximum equivalent stress by 21.2%, that of its maximum deformation by 0.75%, and that of its mass by 1.04%.展开更多
To apply the fire modelling for the fire engineer with symbolic mathematics,the key equations of a zone model were demonstrated. There were thirteen variables with nine constraints,so only four ordinary differential e...To apply the fire modelling for the fire engineer with symbolic mathematics,the key equations of a zone model were demonstrated. There were thirteen variables with nine constraints,so only four ordinary differential equations (ODEs) were required to solve. A typical fire modelling with two-room structure was studied. Accordingly,the source terms included in the ODEs were simplified and modelled,and the fourth Runge-Kutta method was used to solve the ordinary differential equations (ODEs) with symbolic mathematics. Then a zone model could be used with symbolic mathematics. It is proposed that symbolic mathematics is possible for use by fire engineer.展开更多
It focuses on that students must be developed the ability to solve the practical problem by building the mathematics models and the ability to combine the theory with the practice. It also states that students must be...It focuses on that students must be developed the ability to solve the practical problem by building the mathematics models and the ability to combine the theory with the practice. It also states that students must be improved the learning interests and practical experience.展开更多
The purpose of this award is to recognize work of lasting significance and impact in advancing mathematics education as an interdisciplinary field,linking mathematics,educational studies and practice.In particular,the...The purpose of this award is to recognize work of lasting significance and impact in advancing mathematics education as an interdisciplinary field,linking mathematics,educational studies and practice.In particular,the award recognizes major contributions to new knowledge and scholarship,and as well,exemplary contributions in promoting interdisciplinary collaboration in mathematics education.展开更多
Limited research has been conducted on the influences of fiber content on close-in blasting characteristics for ultrahigh-performance fiber-reinforced concrete(UHPFRC)beams.This paper aims to address this knowledge ga...Limited research has been conducted on the influences of fiber content on close-in blasting characteristics for ultrahigh-performance fiber-reinforced concrete(UHPFRC)beams.This paper aims to address this knowledge gap through experimental and mesoscale numerical methods.Experiments were conducted on ten UHPFRC beams built with varying steel fiber volumetric fractions subjected to close-in explosive conditions.Additionally,this study considered other parameters,such as the longitudinal reinforcement type and ratio.In the case of UHPFRC beams featuring normal-strength longitudinal reinforcement of diametersΦ12,Φ16,andΦ20,a reduction in maximum displacement by magnitudes of19.6%,19.5%,and 17.4%was observed,respectively,as the volumetric fractions of fiber increased from1.0%to 2.5%.In addition,increasing the longitudinal reinforcement ratio and using high-strength steel longitudinal reinforcement both significantly reduced the deformation characteristics and increase the blasting resistances of UHPFRC beams.However,the effects on the local crushing and spalling damage were not significant.A mesoscale finite element model,which considers the impacts of fiber parameters on UHPFRC beam behaviors,was also established and well correlated with the test findings.Nevertheless,parametric analyses were further conducted to examine the impacts of the steel fiber content and length and the hybrid effects of various types of microfibers and steel fibers on the blasting performance of UHPFRC beams.展开更多
In order to study the effects of biochar-based organic fertilizer on the accumulation of the total flavonoid contents in dandelion after sowing,the experiment applied four levels of treatments of carbon-based organic ...In order to study the effects of biochar-based organic fertilizer on the accumulation of the total flavonoid contents in dandelion after sowing,the experiment applied four levels of treatments of carbon-based organic fertilizer(0.15,0.30,0.45,and 0.60 kg•m^(-2)),and the base fertilizer that only applied conventional chemical fertilizer was used as the control.The total flavonoid contents and physiological indices of dandelion in different growth periods were determined.The results showed that the accumulation of the total flavonoid contents in leaves and roots of dandelion improved significantly by applying biochar-based organic fertilizer(0.15,0.30,0.45,and 0.60 kg•m^(-2)),with the highest total flavonoid occurred in the 0.45 kg•m^(-2) biochar-based organic fertilizer treatment.Along with dandelion growing,the total flavonoid contents in leaves were first elevated,and then decreased,with the maximum reached at 95 days after sowing(anthesis).While the total flavonoid contents in roots were elevated constantly.The total flavonoid contents accumulation in dandelion were positively correlated with net photosynthetic rate,stomatal conductance,transpiration rate,soluble sugar content,soluble protein,nitrate nitrogen,and available potassium,while negatively correlated with intercellular CO_(2) concentration.展开更多
In challenging situations,such as low illumination,rain,and background clutter,the stability of the thermal infrared(TIR)spectrum can help red,green,blue(RGB)visible spectrum to improve tracking performance.However,th...In challenging situations,such as low illumination,rain,and background clutter,the stability of the thermal infrared(TIR)spectrum can help red,green,blue(RGB)visible spectrum to improve tracking performance.However,the high-level image information and the modality-specific features have not been sufficiently studied.The proposed correlation filter uses the fused saliency content map to improve filter training and extracts different features of modalities.The fused content map is intro-duced into the spatial regularization term of correlation filter to highlight the training samples in the content region.Furthermore,the fused content map can avoid the incompleteness of the con-tent region caused by challenging situations.Additionally,differ-ent features are extracted according to the modality characteris-tics and are fused by the designed response-level fusion stra-tegy.The alternating direction method of multipliers(ADMM)algorithm is used to solve the tracker training efficiently.Experi-ments on the large-scale benchmark datasets show the effec-tiveness of the proposed tracker compared to the state-of-the-art traditional trackers and the deep learning based trackers.展开更多
通过比较不同基质中药用石斛生长量和有效成份质量分数,探究经过无害化处理的松材线虫病疫木在铁皮石斛(Dendrobium officinale Kimura et Migo)人工栽培中作为配方基质的使用效果。结果表明:在铁皮石斛人工种植中使用经过无害化处理后...通过比较不同基质中药用石斛生长量和有效成份质量分数,探究经过无害化处理的松材线虫病疫木在铁皮石斛(Dendrobium officinale Kimura et Migo)人工栽培中作为配方基质的使用效果。结果表明:在铁皮石斛人工种植中使用经过无害化处理后的松材线虫病疫木作为栽培基质切实可行。不同栽培方式适用的松材线虫病疫木替代基质的比例不同。以盆栽方式种植铁皮石斛时,1号基质(V(粒径9~12 mm疫木颗粒)∶V(新鲜树皮)∶V(饼肥)=1∶1∶1)充分发酵后可以在实际生产中替代常规栽培基质使用;以盘栽方式种植铁皮石斛时,3号基质(V(疫木锯末)∶V(新鲜树皮)∶V(饼肥)=1∶1∶1)充分发酵后可以在实际生产中替代常规栽培基质使用。展开更多
文摘Aseries of [(Fe_(0.6)Co_(0.2)Ni_(0.2))_(0.75-0.03x)B_(0.2)Si_(0.05+0.03x)]_(96)Nb_(4) amorphous alloy composite coatings were prepared by adjusting the silicon content(x=0,1,2,3,4,5,and 6)and their microstructures and tribological properties were investigated by laser cladding technique.Additionally,the effect of Si on the glass forming ability(GFA)of the layers was understood.Results show that an appropriate Si content can refine the microstructure of the FeCoNiBSiNb laser cladding layers and improve the mechanical and tribological properties.The hardness of the coating layer increases monotonically with the Si content.At the Si content of 4.8at%(x=0),the coating layer exhibits a relatively low hardness(734.2HV 0.1).Conversely,at the silicon content of 13.44at%(x=3),the coating layer exhibits the highest hardness(1106HV 0.1).The non-crystalline content and tensile strength exhibit an initial increase,followed by a subsequent decrease.At x=2,the coating exhibits its maximum fracture strength(2880 MPa).However,when x>2,the fracture strength of the coating decreases with an increase in x.Conversely,with an increase in Si content,the wear volume loss initially decreases and then increases.At a Si content of 10.56at%(x=2),the coating exhibits the highest non-crystalline content(42%),the highest tensile strength(2880 MPa),and the most favorable dry friction performance.
基金supported by the China Postdoctoral Science Foundation(200902321)a Marie Curie International Incoming Fellowship within the 7th European Community Framework Program(FP7-PIIFGA-2013-629051)
文摘Grey mathematics is the mathematical foundation of the grey system theory. Recently, some important results have been achieved. In order to accelerate the development of grey mathematics, the results are summarized and redefined. This paper includes the fundamental definitions and calculation rules of the grey hazy set, grey number, grey matrix and grey function. Grey mathematics includes four types of operation, i.e. the grey operation, the whitened operation, the covered operation and the only potential true operation. According to its intrinsic quality, the covered operation, which differs from the interval one, is called as the whole-proximate calculation that means the proximate calculation spreads through the whole range of the covered set of every grey number, and we confirm that it may be a new branch of computational or applied mathematics. The overview should develop the grey system theory and grey mathematics.
基金Project(51074180) supported by the National Natural Science Foundation of ChinaProject(2012AA041801) supported by the National High Technology Research and Development Program of China+2 种基金Project(2007CB714002) supported by the National Basic Research Program of ChinaProject(2013GK3003) supported by the Technology Support Plan of Hunan Province,ChinaProject(2010FJ1002) supported by Hunan Science and Technology Major Program,China
文摘In order to improve the strength and stiffness of shield cutterhead, the method of fuzzy mathematics theory in combination with the finite element analysis is adopted. An optimal design model of structural parameters for shield cutterhead is formulated,based on the complex engineering technical requirements. In the model, as the objective function of the model is a composite function of the strength and stiffness, the response surface method is applied to formulate the approximate function of objective function in order to reduce the solution scale of optimal problem. A multi-objective genetic algorithm is used to solve the cutterhead structure design problem and the change rule of the stress-strain with various structural parameters as well as their optimal values were researched under specific geological conditions. The results show that compared with original cutterhead structure scheme, the obtained optimal scheme of the cutterhead structure can greatly improve the strength and stiffness of the cutterhead, which can be seen from the reduction of its maximum equivalent stress by 21.2%, that of its maximum deformation by 0.75%, and that of its mass by 1.04%.
基金Project(PolyU B-Q01e) supported by the Research Project "Onsetting of Internal Fire Whirls in Buildings and Associated Safet Provision"
文摘To apply the fire modelling for the fire engineer with symbolic mathematics,the key equations of a zone model were demonstrated. There were thirteen variables with nine constraints,so only four ordinary differential equations (ODEs) were required to solve. A typical fire modelling with two-room structure was studied. Accordingly,the source terms included in the ODEs were simplified and modelled,and the fourth Runge-Kutta method was used to solve the ordinary differential equations (ODEs) with symbolic mathematics. Then a zone model could be used with symbolic mathematics. It is proposed that symbolic mathematics is possible for use by fire engineer.
文摘It focuses on that students must be developed the ability to solve the practical problem by building the mathematics models and the ability to combine the theory with the practice. It also states that students must be improved the learning interests and practical experience.
文摘The purpose of this award is to recognize work of lasting significance and impact in advancing mathematics education as an interdisciplinary field,linking mathematics,educational studies and practice.In particular,the award recognizes major contributions to new knowledge and scholarship,and as well,exemplary contributions in promoting interdisciplinary collaboration in mathematics education.
基金supported by the National Natural Science Foundation of China(Grant No.12102050)the Open Fund of State Key Laboratory of Explosion Science and Technology(Grant No.SKLEST-ZZ-21-18)。
文摘Limited research has been conducted on the influences of fiber content on close-in blasting characteristics for ultrahigh-performance fiber-reinforced concrete(UHPFRC)beams.This paper aims to address this knowledge gap through experimental and mesoscale numerical methods.Experiments were conducted on ten UHPFRC beams built with varying steel fiber volumetric fractions subjected to close-in explosive conditions.Additionally,this study considered other parameters,such as the longitudinal reinforcement type and ratio.In the case of UHPFRC beams featuring normal-strength longitudinal reinforcement of diametersΦ12,Φ16,andΦ20,a reduction in maximum displacement by magnitudes of19.6%,19.5%,and 17.4%was observed,respectively,as the volumetric fractions of fiber increased from1.0%to 2.5%.In addition,increasing the longitudinal reinforcement ratio and using high-strength steel longitudinal reinforcement both significantly reduced the deformation characteristics and increase the blasting resistances of UHPFRC beams.However,the effects on the local crushing and spalling damage were not significant.A mesoscale finite element model,which considers the impacts of fiber parameters on UHPFRC beam behaviors,was also established and well correlated with the test findings.Nevertheless,parametric analyses were further conducted to examine the impacts of the steel fiber content and length and the hybrid effects of various types of microfibers and steel fibers on the blasting performance of UHPFRC beams.
基金Supported by the National Key Research and Development Project(2021YFD16009012021YFD1600902)。
文摘In order to study the effects of biochar-based organic fertilizer on the accumulation of the total flavonoid contents in dandelion after sowing,the experiment applied four levels of treatments of carbon-based organic fertilizer(0.15,0.30,0.45,and 0.60 kg•m^(-2)),and the base fertilizer that only applied conventional chemical fertilizer was used as the control.The total flavonoid contents and physiological indices of dandelion in different growth periods were determined.The results showed that the accumulation of the total flavonoid contents in leaves and roots of dandelion improved significantly by applying biochar-based organic fertilizer(0.15,0.30,0.45,and 0.60 kg•m^(-2)),with the highest total flavonoid occurred in the 0.45 kg•m^(-2) biochar-based organic fertilizer treatment.Along with dandelion growing,the total flavonoid contents in leaves were first elevated,and then decreased,with the maximum reached at 95 days after sowing(anthesis).While the total flavonoid contents in roots were elevated constantly.The total flavonoid contents accumulation in dandelion were positively correlated with net photosynthetic rate,stomatal conductance,transpiration rate,soluble sugar content,soluble protein,nitrate nitrogen,and available potassium,while negatively correlated with intercellular CO_(2) concentration.
基金supported by the National Natural Science Foundation of China(62073036,62076031)Beijing Natural Science Foundation(4242049).
文摘In challenging situations,such as low illumination,rain,and background clutter,the stability of the thermal infrared(TIR)spectrum can help red,green,blue(RGB)visible spectrum to improve tracking performance.However,the high-level image information and the modality-specific features have not been sufficiently studied.The proposed correlation filter uses the fused saliency content map to improve filter training and extracts different features of modalities.The fused content map is intro-duced into the spatial regularization term of correlation filter to highlight the training samples in the content region.Furthermore,the fused content map can avoid the incompleteness of the con-tent region caused by challenging situations.Additionally,differ-ent features are extracted according to the modality characteris-tics and are fused by the designed response-level fusion stra-tegy.The alternating direction method of multipliers(ADMM)algorithm is used to solve the tracker training efficiently.Experi-ments on the large-scale benchmark datasets show the effec-tiveness of the proposed tracker compared to the state-of-the-art traditional trackers and the deep learning based trackers.
文摘利用全球导航卫星系统(Global Navigation Satellite System,GNSS)双频差分信号进行电离层电子含量反演是一种常用的电离层探测手段,但GNSS信号在强电磁干扰环境下,被淹没于电磁噪声中而无法被提取,影响电离层总电子含量(total electron content,TEC)反演系统的可靠性。采用传统调零抗干扰阵列天线方案能解决干扰源剥离的问题,但调零信号的天线相位中心不稳定导致高精度的相位平滑伪距和精密单点定位(precise point positioning,PPP)算法无法收敛。针对强干扰环境下的电离层监测需求,本文提出一种抗干扰TEC数据反演手段,通过对阵列天线通道幅相一致性进行校正,保证相位中心的稳定性,从而推算出准确的电离层TEC信息,提高了系统的可靠性和抗干扰能力。
