The high price of different biodiesels and the need for many of their raw ingredients as food materials are the main constraints to be overcome when seeking the best potential alternative fuels to petro-diesel. Apart ...The high price of different biodiesels and the need for many of their raw ingredients as food materials are the main constraints to be overcome when seeking the best potential alternative fuels to petro-diesel. Apart from that, some properties like high density, viscosity and acid value along with low cloud and pour points preclude their use in com- pression ignition （CI） engines as these properties can cause serious damage to the parts of the engine and reduce engine life. In this experiment, biodiesel was produced from the oil of unused algae by a two-step ＇acid esterification followed by transesterification＇ procedure. Taguchi＇s method was applied to design the experiment, and a L25 orthogonal array was prepared to optimize the biodiesel production procedure. The optimized conditions for transesterification were： methanol to oil molar ratio of 6：1, catalyst （KOH） concentration of 2.5 wt%, reaction time of 90 min and reaction temperature of 50 ~C, achieving a biodiesel production of 89.7% with free fatty acid content of 0.25%. It was found that the CI engine emitted less CO, CO2 and hydrocarbon and higher NOx using algal biodiesel than that using petro-diesel. All properties of the algal biodiesel were within the limit of ASTM standards.展开更多
The non-edible oils are believed to be one of the major feedstock for the production of biodiesel in future.In the present study,we investigated the production of Jatropha oil methyl esters（JOMEs） via alkali-catalyz...The non-edible oils are believed to be one of the major feedstock for the production of biodiesel in future.In the present study,we investigated the production of Jatropha oil methyl esters（JOMEs） via alkali-catalyzed transesterification route.The biophysical characteristics of Jatropha oil were found within the optimal range in accordance with ASTM standards as a substitute diesel fuel.The chemical composition and production yield of as-synthesized biodiesel were confirmed by various analytical techniques such as FT-IR,1H NMR,13 C NMR and gas chromatography coupled with mass spectrometry.A high percentage conversion,～96.09%,of fatty acids into esters was achieved under optimized transesterification conditions with 6 ：1 oil to methanol ratio and 0.9 wt% Na OH for 50 min at ～60°C.Moreover,twelve fatty acids methyl esters（FAME） were quantified in the GC/MS analysis and it was interesting to note that the mass fragmentation pattern of saturated,monounsaturated and diunsaturated FAME was comparable with the literature reported values.展开更多
Oil content from seed kernels of Xanthoceras sorbifolia from 13 areas in China was analyzed by gas chromatography–mass spectrometry to determine oil characteristics and biodiesel properties. The seeds had a high kern...Oil content from seed kernels of Xanthoceras sorbifolia from 13 areas in China was analyzed by gas chromatography–mass spectrometry to determine oil characteristics and biodiesel properties. The seeds had a high kernel percentage (53.67%± 7.51), oil content (52.21%± 4.01), and biodiesel yield (99.77%± 0.21). Among the fatty acids in the oil were high percentages of linoleic acid (41.66 ± 2.26)% and oleic acid (28.44%± 2.03). Most of the fuel properties complied well with the ASTM D6751-10, EN 14214-08, and GB/T 20828-2014 standards. The 13 sampling areas were grouped into four clusters based on different kernel percentage, oil content, biodiesel yield, and fatty acid composition. The results showed that the quality of kernel oils from seeds from Ar Horqin Banner was the best, although kernel oils from seeds in all 13 areas were suitable for biodiesel production. This study provides a basis for selecting optimal sites to harvest seeds from X. sorbifolia.展开更多
Biodiesel is one of the most popular prospective alternative fuels and can be obtained from a variety of sources. Waste frying oil is one such source along with the various raw vegetable oils. However, some specific t...Biodiesel is one of the most popular prospective alternative fuels and can be obtained from a variety of sources. Waste frying oil is one such source along with the various raw vegetable oils. However, some specific technical treatments are required to improve certain fuel properties such as viscosity and calorific value of the biodiesel being obtained from waste cooking oil methyl ester （WCOME）. Various treatments are applied depending on the source and therefore the composition of the cooking oil. This research investigated the performance of WCOME as an alternative biofuel in a four-stroke direct injection diesel engine. An 8-mode test was undertaken with diesel fuel and five WCOME blends. The best compromise blend in terms of performance and emissions was identified. Results showed that energy utilization factors of the blends were similar within the range of the operational parameters （speed, load and WCOME content）. Increasing biodiesel content produced slightly more smoke and NOx for a great majority of test points, while the CO and THC emissions were lower.展开更多
文摘The high price of different biodiesels and the need for many of their raw ingredients as food materials are the main constraints to be overcome when seeking the best potential alternative fuels to petro-diesel. Apart from that, some properties like high density, viscosity and acid value along with low cloud and pour points preclude their use in com- pression ignition （CI） engines as these properties can cause serious damage to the parts of the engine and reduce engine life. In this experiment, biodiesel was produced from the oil of unused algae by a two-step ＇acid esterification followed by transesterification＇ procedure. Taguchi＇s method was applied to design the experiment, and a L25 orthogonal array was prepared to optimize the biodiesel production procedure. The optimized conditions for transesterification were： methanol to oil molar ratio of 6：1, catalyst （KOH） concentration of 2.5 wt%, reaction time of 90 min and reaction temperature of 50 ~C, achieving a biodiesel production of 89.7% with free fatty acid content of 0.25%. It was found that the CI engine emitted less CO, CO2 and hydrocarbon and higher NOx using algal biodiesel than that using petro-diesel. All properties of the algal biodiesel were within the limit of ASTM standards.
基金financial and moral support from the National Centre for Physics Islamabad,Pakistan to carry out of this present research workDeanship of Scientific Research at King Saud University for it’s funding of this research through the Research Group Project no RGP-VPP-345
文摘The non-edible oils are believed to be one of the major feedstock for the production of biodiesel in future.In the present study,we investigated the production of Jatropha oil methyl esters（JOMEs） via alkali-catalyzed transesterification route.The biophysical characteristics of Jatropha oil were found within the optimal range in accordance with ASTM standards as a substitute diesel fuel.The chemical composition and production yield of as-synthesized biodiesel were confirmed by various analytical techniques such as FT-IR,1H NMR,13 C NMR and gas chromatography coupled with mass spectrometry.A high percentage conversion,～96.09%,of fatty acids into esters was achieved under optimized transesterification conditions with 6 ：1 oil to methanol ratio and 0.9 wt% Na OH for 50 min at ～60°C.Moreover,twelve fatty acids methyl esters（FAME） were quantified in the GC/MS analysis and it was interesting to note that the mass fragmentation pattern of saturated,monounsaturated and diunsaturated FAME was comparable with the literature reported values.
基金financially supported by the International S&T Cooperation Program of China(2014DFA31140)
文摘Oil content from seed kernels of Xanthoceras sorbifolia from 13 areas in China was analyzed by gas chromatography–mass spectrometry to determine oil characteristics and biodiesel properties. The seeds had a high kernel percentage (53.67%± 7.51), oil content (52.21%± 4.01), and biodiesel yield (99.77%± 0.21). Among the fatty acids in the oil were high percentages of linoleic acid (41.66 ± 2.26)% and oleic acid (28.44%± 2.03). Most of the fuel properties complied well with the ASTM D6751-10, EN 14214-08, and GB/T 20828-2014 standards. The 13 sampling areas were grouped into four clusters based on different kernel percentage, oil content, biodiesel yield, and fatty acid composition. The results showed that the quality of kernel oils from seeds from Ar Horqin Banner was the best, although kernel oils from seeds in all 13 areas were suitable for biodiesel production. This study provides a basis for selecting optimal sites to harvest seeds from X. sorbifolia.
文摘Biodiesel is one of the most popular prospective alternative fuels and can be obtained from a variety of sources. Waste frying oil is one such source along with the various raw vegetable oils. However, some specific technical treatments are required to improve certain fuel properties such as viscosity and calorific value of the biodiesel being obtained from waste cooking oil methyl ester （WCOME）. Various treatments are applied depending on the source and therefore the composition of the cooking oil. This research investigated the performance of WCOME as an alternative biofuel in a four-stroke direct injection diesel engine. An 8-mode test was undertaken with diesel fuel and five WCOME blends. The best compromise blend in terms of performance and emissions was identified. Results showed that energy utilization factors of the blends were similar within the range of the operational parameters （speed, load and WCOME content）. Increasing biodiesel content produced slightly more smoke and NOx for a great majority of test points, while the CO and THC emissions were lower.
