In order to control the noise of the heavy truck interior cab effectively, the active noise control methods are employed. First, an interior noise field test for the heavy truck is performed, and frequencies of interi...In order to control the noise of the heavy truck interior cab effectively, the active noise control methods are employed. First, an interior noise field test for the heavy truck is performed, and frequencies of interior noise of this vehicle are analyzed. According to the spectrum analysis of acquired noise signal, it is found out that the main frequencies of interior noise are less than 800Hz. Then the least squares lattice （LSL） algorithm is used as signal processing algorithm of the controller and a closed-loop control DSP system, based on TMS 320VC5416, is developed. The residual signal at driver＇s ear is used as feedback signal. Lastly, the developed ANC system is loaded into the heavy truck cab, and controlling the noise at driver＇ s ear for that truck at different driving speeds is attempted. The noise control test results indicate that the cab interior noise is reduced averagely by 0.9 dBA at different driving speeds.展开更多
Smart material and structure (SMS) is a challenging novel technique for the 21 century especially in fields of aviation and aerospace. Vibration and noise suppression smart structure is an important branch of SMS. T...Smart material and structure (SMS) is a challenging novel technique for the 21 century especially in fields of aviation and aerospace. Vibration and noise suppression smart structure is an important branch of SMS. There are several typical structures such as the cabin of an airplane, space station, the solar board of satellite and the rotor blade of a helicopter, of which the vibrations and radiation noises have bad influences on precise equipments and aiming systems. In order to suppress vibrations and noises of these structures, several algorithms are applied to the models which simulate the structures. Experiments are performed to suppress vibrations and noises by bonding sensors and actuators to the structures at the optimized locations and using computer based measurement and control systems. For the blade vibration control of a helicopter, a non contact method of signal transmission by magneto electric coupling is discussed. The experimental results demonstrate that the methods used for active control are effective.展开更多
车内主动噪声控制中常使用的传统滤波-x最小均方(Filtered-x Least Mean Square,FxLMS)算法由于计算复杂度高,往往导致系统硬件算力不足,降噪效果不理想。文章提出一种基于改进局部次级通路建模方法的自适应陷波(Local-secondary-path F...车内主动噪声控制中常使用的传统滤波-x最小均方(Filtered-x Least Mean Square,FxLMS)算法由于计算复杂度高,往往导致系统硬件算力不足,降噪效果不理想。文章提出一种基于改进局部次级通路建模方法的自适应陷波(Local-secondary-path Filtered-x Least Mean Square,LFxLMS)算法及其相应的窄带主动噪声控制(LFxLMS-based Narrowband Active Noise Control,LFx-NANC)系统。所提出的改进局部次级通路建模方法具有更高的建模精度,且该系统相较于传统系统大大降低了计算复杂度。通过基于Matlab软件的仿真分析,验证了该系统对稳态及非稳态多谐波噪声的降噪性能。基于ADSP-21489控制器搭建车内双通道LFx-NANC系统,实现了在稳态工况下主驾位置处二、四、六阶降噪量分别达到34.67、21.41、10.29 dB(A);在加速工况下主驾位置处总声压级和二阶降噪量分别达到6.01 dB(A)和20.40 dB(A),同时在其他位置均有较好的降噪效果。文中提出的方法为主动噪声控制的工程应用提供了参考。展开更多
The vibration and noise produced by the powertrain and waves inside ship cabins limit working efficiency and crew and passengers’accommodation quality.This paper simplifies ship cabins as cavities and explores active...The vibration and noise produced by the powertrain and waves inside ship cabins limit working efficiency and crew and passengers’accommodation quality.This paper simplifies ship cabins as cavities and explores active control techniques to attenuate sound transmission via multiple parallel-supported flexible subplates.The theoretical formulations of the interaction between multiple subplates and cavities were performed and the coupling relationships between them were analyzed.Based on the multiple subplates and the cavity coupling models,numerical simulations were performed using the derived optimal controller to minimize the transmission of sound into the cavities through two and nine parallel-supported subplates.The various control strategies were explored to minimize the coupling system’s acoustic potential energy,and the control performances were compared and discussed.The mechanism of reducing sound transmission through multiple supported subplates into a cavity is revealed.The simulation results showed that the vibration pattern of the controlled subplate is changed after it is regulated,which increases its radiation to subdue the other subplates’radiation,while increasing vibration of the controlled subplate.The more subplates a cavity has,the more kinetic energy the controlled subplate possess.Furthermore,the noise reduction performance of a cavity with fewer subplates is better than that with more subplates.展开更多
基金Sponsored by the National Natural Science Foundation of China (50875022)Research Foundation of Beijing Institute of Technology(20070342012)
文摘In order to control the noise of the heavy truck interior cab effectively, the active noise control methods are employed. First, an interior noise field test for the heavy truck is performed, and frequencies of interior noise of this vehicle are analyzed. According to the spectrum analysis of acquired noise signal, it is found out that the main frequencies of interior noise are less than 800Hz. Then the least squares lattice （LSL） algorithm is used as signal processing algorithm of the controller and a closed-loop control DSP system, based on TMS 320VC5416, is developed. The residual signal at driver＇s ear is used as feedback signal. Lastly, the developed ANC system is loaded into the heavy truck cab, and controlling the noise at driver＇ s ear for that truck at different driving speeds is attempted. The noise control test results indicate that the cab interior noise is reduced averagely by 0.9 dBA at different driving speeds.
文摘Smart material and structure (SMS) is a challenging novel technique for the 21 century especially in fields of aviation and aerospace. Vibration and noise suppression smart structure is an important branch of SMS. There are several typical structures such as the cabin of an airplane, space station, the solar board of satellite and the rotor blade of a helicopter, of which the vibrations and radiation noises have bad influences on precise equipments and aiming systems. In order to suppress vibrations and noises of these structures, several algorithms are applied to the models which simulate the structures. Experiments are performed to suppress vibrations and noises by bonding sensors and actuators to the structures at the optimized locations and using computer based measurement and control systems. For the blade vibration control of a helicopter, a non contact method of signal transmission by magneto electric coupling is discussed. The experimental results demonstrate that the methods used for active control are effective.
文摘车内主动噪声控制中常使用的传统滤波-x最小均方(Filtered-x Least Mean Square,FxLMS)算法由于计算复杂度高,往往导致系统硬件算力不足,降噪效果不理想。文章提出一种基于改进局部次级通路建模方法的自适应陷波(Local-secondary-path Filtered-x Least Mean Square,LFxLMS)算法及其相应的窄带主动噪声控制(LFxLMS-based Narrowband Active Noise Control,LFx-NANC)系统。所提出的改进局部次级通路建模方法具有更高的建模精度,且该系统相较于传统系统大大降低了计算复杂度。通过基于Matlab软件的仿真分析,验证了该系统对稳态及非稳态多谐波噪声的降噪性能。基于ADSP-21489控制器搭建车内双通道LFx-NANC系统,实现了在稳态工况下主驾位置处二、四、六阶降噪量分别达到34.67、21.41、10.29 dB(A);在加速工况下主驾位置处总声压级和二阶降噪量分别达到6.01 dB(A)和20.40 dB(A),同时在其他位置均有较好的降噪效果。文中提出的方法为主动噪声控制的工程应用提供了参考。
文摘The vibration and noise produced by the powertrain and waves inside ship cabins limit working efficiency and crew and passengers’accommodation quality.This paper simplifies ship cabins as cavities and explores active control techniques to attenuate sound transmission via multiple parallel-supported flexible subplates.The theoretical formulations of the interaction between multiple subplates and cavities were performed and the coupling relationships between them were analyzed.Based on the multiple subplates and the cavity coupling models,numerical simulations were performed using the derived optimal controller to minimize the transmission of sound into the cavities through two and nine parallel-supported subplates.The various control strategies were explored to minimize the coupling system’s acoustic potential energy,and the control performances were compared and discussed.The mechanism of reducing sound transmission through multiple supported subplates into a cavity is revealed.The simulation results showed that the vibration pattern of the controlled subplate is changed after it is regulated,which increases its radiation to subdue the other subplates’radiation,while increasing vibration of the controlled subplate.The more subplates a cavity has,the more kinetic energy the controlled subplate possess.Furthermore,the noise reduction performance of a cavity with fewer subplates is better than that with more subplates.
