In previous researches on a model-based diagnostic system, the components are assumed mutually independent. Howerver , the assumption is not always the case because the information about whether a component is faulty ...In previous researches on a model-based diagnostic system, the components are assumed mutually independent. Howerver , the assumption is not always the case because the information about whether a component is faulty or not usually influences our knowledge about other components. Some experts may draw such a conclusion that 'if component m 1 is faulty, then component m 2 may be faulty too'. How can we use this experts' knowledge to aid the diagnosis? Based on Kohlas's probabilistic assumption-based reasoning method, we use Bayes networks to solve this problem. We calculate the posterior fault probability of the components in the observation state. The result is reasonable and reflects the effectiveness of the experts' knowledge.展开更多
Automatic bridge detection is an important application of SAR images. Differed from the classical CFAR method, a new knowledge-based bridge detection approach is proposed. The method not only uses the backscattering i...Automatic bridge detection is an important application of SAR images. Differed from the classical CFAR method, a new knowledge-based bridge detection approach is proposed. The method not only uses the backscattering intensity difference between targets and background but also applies the contextual information and spatial relationship between objects. According to bridges＇ special characteristics and scattering properties in SAR images, the new knowledge-based method includes three processes： river segmentation, potential bridge areas detection and bridge discrimination. The application to AIRSAR data shows that the new method is not sensitive to rivers＇ shape. Moreover, this method can detect bridges successfully when river segmentation is not very exact and is more robust than the radius projection method.展开更多
By the turn of the 21 st century,the significance of knowledge to be the key factor in urban and regional development is well established. However,it has been recently and in only a few studies that attempts have been...By the turn of the 21 st century,the significance of knowledge to be the key factor in urban and regional development is well established. However,it has been recently and in only a few studies that attempts have been made to identify the specific mechanism and institutional relationships,through which knowledge-based development actually takes place.This paper builds upon the "Triple Helix Model" (Etzkowitz & Klofsten,2005) where university,business and government have been introduced as the key factors behind any knowledge-based development.It refers to a case study of knowledge-based community development in Australia's Smart State Queensland-and examines the role of the "Triple Helix" in the interaction between local and regional level.It shows the central role of the community as an innovation base for the interaction among the key factors and suggests a promotion for a Quadruple Helix Model where community is as important as business,university and government in the new economy.The paper concludes that knowledge-based development will not promote unless all four factors-community,business,university,government-work together.展开更多
The gate assignment at an airport is one of the major activities in airport operations.With the increase of passenger traffic volumes and the number of flights, the complexity of this task and the factors to be consid...The gate assignment at an airport is one of the major activities in airport operations.With the increase of passenger traffic volumes and the number of flights, the complexity of this task and the factors to be considered have increased significantly, and an efficient gate utilizationhas received considerable attention. For overcoming the shortcomings of previous gate assignmentapproaches, this paper presents a partial parallel gate assignment approach, by which more factorsconcerning aircraft and gates can be collsidered at the same time. This paper also presents themethod of using a knowledge-based system combined with a mathematical programming method forgetting an optimized feasible assignment solution. By this way, it is more easily to get the solutionthat satisfies both the static and dynamic situations,and thus it may adapt well to meet the needsof actual use to rea-time operations. An experimental prototype has been implemented, and a casestudy is presented at the end of the paper.展开更多
In this paper, the structure characteristics of open complex giant systems are concretely analysed in depth, thus the view and its significance to support the meta synthesis engineering with manifold knowledge models...In this paper, the structure characteristics of open complex giant systems are concretely analysed in depth, thus the view and its significance to support the meta synthesis engineering with manifold knowledge models are clarified. Furthermore, the knowledge based multifaceted modeling methodology for open complex giant systems is emphatically studied. The major points are as follows: (1) nonlinear mechanism and general information partition law; (2) from the symmetry and similarity to the acquisition of construction knowledge; (3) structures for hierarchical and nonhierarchical organizations; (4) the integration of manifold knowledge models; (5) the methodology of knowledge based multifaceted modeling.展开更多
The limitations of traditional approaches to selection problems are examined. A problemsolving strategy is presented in which decision-support and knowledge-based techniques play complementary roles. An approach to th...The limitations of traditional approaches to selection problems are examined. A problemsolving strategy is presented in which decision-support and knowledge-based techniques play complementary roles. An approach to the representation of knowledge to support the problem-solving strategy is presented which avoids commitment to a specific programming language or implementation environment. The problem of choosing a home is used to illustrate the representation of knowledge in a specific problem domain. Techniques for implementation of the problem-solving strategy are described. Knowledge elicitation techniques and their implementation in a development shell for application of the problem-solving strategy to any selection problem are also described.展开更多
This paper summarizes the research results dealing with washer and nut taxonomy and knowledge base design, making the use of fuzzy methodology. In particular, the theory of fuzzy membership functions, similarity matri...This paper summarizes the research results dealing with washer and nut taxonomy and knowledge base design, making the use of fuzzy methodology. In particular, the theory of fuzzy membership functions, similarity matrices, and the operation of fuzzy inference play important roles.A realistic set of 25 washers and nuts are employed to conduct extensive experiments and simulations.The investigation includes a complete demonstration of engineering design. The results obtained from this feasibility study are very encouraging indeed because they represent the lower bound with respect to performance, namely correctrecognition rate, of what fuzzy methodology can do. This lower bound shows high recognition rate even with noisy input patterns, robustness in terms of noise tolerance, and simplicity in hardware implementation. Possible future works are suggested in the conclusion.展开更多
The paper presents a cognitive science framework for the analysis of knowledge-based systems,including people, media. simulation and expert systems, resulting in a practical model for the procedures ofknowledge engine...The paper presents a cognitive science framework for the analysis of knowledge-based systems,including people, media. simulation and expert systems, resulting in a practical model for the procedures ofknowledge engineering. Starting with the construct of a social organization model driven by anticipationand thed differentiating this into pesonal scientists with diverse relations to people and their internal andexternal communication, it provides powerful and general model of society. people, and the roles of peoplein society. This model extends naturally ic the role of conventional media in the knowledge processes ofsociety and the new roles of computer-based simulation and expert systems. In particular it provides amodel of knowledge transfer that enables the processes of knowledge engineering to be analyzed andautomated.展开更多
This paper reports an aspiration-directed, model-based decision support system (AMDSS) integrated with a knowledge-based simulation system. The system is designed to study China's mid-range economic development st...This paper reports an aspiration-directed, model-based decision support system (AMDSS) integrated with a knowledge-based simulation system. The system is designed to study China's mid-range economic development strategy. The capacity of the system is enhanced by the knowledge-based component which provides a knowledge-based simulation environment for model management. Currently the system has passed the stage of prototype and achieves its implementation capacity. The paper first presents the mathematical aspects of decision making including aspiration-directed decision making, then discusses the architecture of the system. The purpose of the paper is to provide insights into how such an integrated system could provide decision support for complex decision analysis.展开更多
Steps of manipulation is required to complete the m od eling of the connection elements such as bolt, pin and the like in commerce CAD system. It leads to low efficiency, difficulty to assure the relative position, im...Steps of manipulation is required to complete the m od eling of the connection elements such as bolt, pin and the like in commerce CAD system. It leads to low efficiency, difficulty to assure the relative position, impossibility to express rules and knowledge. Based on the inner character analy sis of interpart, detail modification and assembly relation of mechanical connec ting element, the idea, which extends the feature modeling of part to the interp art feature modeling for assembly purpose, is presented, and virtual part based connecting element modeling is proposed. Virtual part is a complement set of lo cal modification of part to be connected. In assembly modeling, base part is mod ified by Boolean operation between base part and virtual part. The modeling and assembly is finished just in one operation, at the same time the rules and knowl edge of the connection elements are encapsulated through virtual part. According to this mechanism, a knowledge-based connecting elements rapid design module i s developed on commerce software package UG with satisfying results.展开更多
When the classical constant false-alarm rate （CFAR） combined with fuzzy C-means （FCM） algorithm is applied to target detection in synthetic aperture radar （SAR） images with complex background, CFAR requires bloc...When the classical constant false-alarm rate （CFAR） combined with fuzzy C-means （FCM） algorithm is applied to target detection in synthetic aperture radar （SAR） images with complex background, CFAR requires block-by-block estimation of clutter models and FCM clustering converges to local optimum. To address these problems, this paper pro-poses a new detection algorithm： knowledge-based combined with improved genetic algorithm-fuzzy C-means （GA-FCM） algorithm. Firstly, the algorithm takes target region＇s maximum and average intensity, area, length of long axis and long-to-short axis ratio of the external ellipse as factors which influence the target appearing probabil- ity. The knowledge-based detection algorithm can produce preprocess results without the need of estimation of clutter models as CFAR does. Afterward the GA-FCM algorithm is improved to cluster pre-process results. It has advantages of incorporating global optimizing ability of GA and local optimizing ability of FCM, which will further eliminate false alarms and get better results. The effectiveness of the proposed technique is experimentally validated with real SAR images.展开更多
文摘In previous researches on a model-based diagnostic system, the components are assumed mutually independent. Howerver , the assumption is not always the case because the information about whether a component is faulty or not usually influences our knowledge about other components. Some experts may draw such a conclusion that 'if component m 1 is faulty, then component m 2 may be faulty too'. How can we use this experts' knowledge to aid the diagnosis? Based on Kohlas's probabilistic assumption-based reasoning method, we use Bayes networks to solve this problem. We calculate the posterior fault probability of the components in the observation state. The result is reasonable and reflects the effectiveness of the experts' knowledge.
基金supported by the National Key Laboratory of ATR(9140C8002010706).
文摘Automatic bridge detection is an important application of SAR images. Differed from the classical CFAR method, a new knowledge-based bridge detection approach is proposed. The method not only uses the backscattering intensity difference between targets and background but also applies the contextual information and spatial relationship between objects. According to bridges＇ special characteristics and scattering properties in SAR images, the new knowledge-based method includes three processes： river segmentation, potential bridge areas detection and bridge discrimination. The application to AIRSAR data shows that the new method is not sensitive to rivers＇ shape. Moreover, this method can detect bridges successfully when river segmentation is not very exact and is more robust than the radius projection method.
文摘By the turn of the 21 st century,the significance of knowledge to be the key factor in urban and regional development is well established. However,it has been recently and in only a few studies that attempts have been made to identify the specific mechanism and institutional relationships,through which knowledge-based development actually takes place.This paper builds upon the "Triple Helix Model" (Etzkowitz & Klofsten,2005) where university,business and government have been introduced as the key factors behind any knowledge-based development.It refers to a case study of knowledge-based community development in Australia's Smart State Queensland-and examines the role of the "Triple Helix" in the interaction between local and regional level.It shows the central role of the community as an innovation base for the interaction among the key factors and suggests a promotion for a Quadruple Helix Model where community is as important as business,university and government in the new economy.The paper concludes that knowledge-based development will not promote unless all four factors-community,business,university,government-work together.
文摘The gate assignment at an airport is one of the major activities in airport operations.With the increase of passenger traffic volumes and the number of flights, the complexity of this task and the factors to be considered have increased significantly, and an efficient gate utilizationhas received considerable attention. For overcoming the shortcomings of previous gate assignmentapproaches, this paper presents a partial parallel gate assignment approach, by which more factorsconcerning aircraft and gates can be collsidered at the same time. This paper also presents themethod of using a knowledge-based system combined with a mathematical programming method forgetting an optimized feasible assignment solution. By this way, it is more easily to get the solutionthat satisfies both the static and dynamic situations,and thus it may adapt well to meet the needsof actual use to rea-time operations. An experimental prototype has been implemented, and a casestudy is presented at the end of the paper.
文摘In this paper, the structure characteristics of open complex giant systems are concretely analysed in depth, thus the view and its significance to support the meta synthesis engineering with manifold knowledge models are clarified. Furthermore, the knowledge based multifaceted modeling methodology for open complex giant systems is emphatically studied. The major points are as follows: (1) nonlinear mechanism and general information partition law; (2) from the symmetry and similarity to the acquisition of construction knowledge; (3) structures for hierarchical and nonhierarchical organizations; (4) the integration of manifold knowledge models; (5) the methodology of knowledge based multifaceted modeling.
文摘The limitations of traditional approaches to selection problems are examined. A problemsolving strategy is presented in which decision-support and knowledge-based techniques play complementary roles. An approach to the representation of knowledge to support the problem-solving strategy is presented which avoids commitment to a specific programming language or implementation environment. The problem of choosing a home is used to illustrate the representation of knowledge in a specific problem domain. Techniques for implementation of the problem-solving strategy are described. Knowledge elicitation techniques and their implementation in a development shell for application of the problem-solving strategy to any selection problem are also described.
文摘This paper summarizes the research results dealing with washer and nut taxonomy and knowledge base design, making the use of fuzzy methodology. In particular, the theory of fuzzy membership functions, similarity matrices, and the operation of fuzzy inference play important roles.A realistic set of 25 washers and nuts are employed to conduct extensive experiments and simulations.The investigation includes a complete demonstration of engineering design. The results obtained from this feasibility study are very encouraging indeed because they represent the lower bound with respect to performance, namely correctrecognition rate, of what fuzzy methodology can do. This lower bound shows high recognition rate even with noisy input patterns, robustness in terms of noise tolerance, and simplicity in hardware implementation. Possible future works are suggested in the conclusion.
文摘The paper presents a cognitive science framework for the analysis of knowledge-based systems,including people, media. simulation and expert systems, resulting in a practical model for the procedures ofknowledge engineering. Starting with the construct of a social organization model driven by anticipationand thed differentiating this into pesonal scientists with diverse relations to people and their internal andexternal communication, it provides powerful and general model of society. people, and the roles of peoplein society. This model extends naturally ic the role of conventional media in the knowledge processes ofsociety and the new roles of computer-based simulation and expert systems. In particular it provides amodel of knowledge transfer that enables the processes of knowledge engineering to be analyzed andautomated.
文摘This paper reports an aspiration-directed, model-based decision support system (AMDSS) integrated with a knowledge-based simulation system. The system is designed to study China's mid-range economic development strategy. The capacity of the system is enhanced by the knowledge-based component which provides a knowledge-based simulation environment for model management. Currently the system has passed the stage of prototype and achieves its implementation capacity. The paper first presents the mathematical aspects of decision making including aspiration-directed decision making, then discusses the architecture of the system. The purpose of the paper is to provide insights into how such an integrated system could provide decision support for complex decision analysis.
文摘Steps of manipulation is required to complete the m od eling of the connection elements such as bolt, pin and the like in commerce CAD system. It leads to low efficiency, difficulty to assure the relative position, impossibility to express rules and knowledge. Based on the inner character analy sis of interpart, detail modification and assembly relation of mechanical connec ting element, the idea, which extends the feature modeling of part to the interp art feature modeling for assembly purpose, is presented, and virtual part based connecting element modeling is proposed. Virtual part is a complement set of lo cal modification of part to be connected. In assembly modeling, base part is mod ified by Boolean operation between base part and virtual part. The modeling and assembly is finished just in one operation, at the same time the rules and knowl edge of the connection elements are encapsulated through virtual part. According to this mechanism, a knowledge-based connecting elements rapid design module i s developed on commerce software package UG with satisfying results.
基金supported by the National Natural Science Foundation of China(6107113961171122)+1 种基金the Fundamental Research Funds for the Central Universities"New Star in Blue Sky" Program Foundation the Foundation of ATR Key Lab
文摘When the classical constant false-alarm rate （CFAR） combined with fuzzy C-means （FCM） algorithm is applied to target detection in synthetic aperture radar （SAR） images with complex background, CFAR requires block-by-block estimation of clutter models and FCM clustering converges to local optimum. To address these problems, this paper pro-poses a new detection algorithm： knowledge-based combined with improved genetic algorithm-fuzzy C-means （GA-FCM） algorithm. Firstly, the algorithm takes target region＇s maximum and average intensity, area, length of long axis and long-to-short axis ratio of the external ellipse as factors which influence the target appearing probabil- ity. The knowledge-based detection algorithm can produce preprocess results without the need of estimation of clutter models as CFAR does. Afterward the GA-FCM algorithm is improved to cluster pre-process results. It has advantages of incorporating global optimizing ability of GA and local optimizing ability of FCM, which will further eliminate false alarms and get better results. The effectiveness of the proposed technique is experimentally validated with real SAR images.
