We report a monolithic integrated dual-wavelength laser diode based on a distributed Bragg reflector （DBR） composite resonant cavity. The device consists of three sections, a DBR grating section, a passive phase sec...We report a monolithic integrated dual-wavelength laser diode based on a distributed Bragg reflector （DBR） composite resonant cavity. The device consists of three sections, a DBR grating section, a passive phase section, and an active gain section. The gain section facet is cleaved to work as a laser cavity mirror. The other laser mirror is the DBR grating, which also functions as a wavelength filter and can control the number of wavelengths involved in the laser action. The reflection bandwidth of the DBR grating is fabricated to have an appropriate value to make the device work at the dual-wavelength lasing state. We adopt the quantum well intermixing （QWI） technique to provide low-absorption loss grating and passive phase section in the fabrication process. By tuning the injection currents on the DBR and the gain sections, the device can generate 0.596 nm-spaced dual-wavelength lasing at room temperature.展开更多
We investigate metallic microdisk-size dependence of quantum dot （QD） spontaneous emission rate and micro- antenna directional emission effect for the hybrid metM-distributed Bragg reflector structures based on a pa...We investigate metallic microdisk-size dependence of quantum dot （QD） spontaneous emission rate and micro- antenna directional emission effect for the hybrid metM-distributed Bragg reflector structures based on a particular single QD emission. It is found that the measured photolumineseence （PL） intensity is very sensitive to the size of metMlic disk, showing an enhancement factor of 11 when the optimal disk diameter is 2μm and the numerical aperture of microscope objective NA=0.5. It is found that for large metal disks, the Purcell effect is dominant for enhanced PL intensity, whereas for small size disks the main contribution comes from plasmon scattering at the disk edge within the light cone collected by the microscope objective.展开更多
The resistance characteristics of a continuously-graded distributed Bragg reflector（DBR） in a 980-nm verticalcavity surface-emitting laser（VCSEL） are modeled in detail.The junction resistances between the layers o...The resistance characteristics of a continuously-graded distributed Bragg reflector（DBR） in a 980-nm verticalcavity surface-emitting laser（VCSEL） are modeled in detail.The junction resistances between the layers of both the p-and n-DBR mirrors are analysed by combining the thermionic emission model and the finite difference method.In the meantime,the intrinsic resistance of the DBR material system is calculated to make a comparison with the junction resistance.The minimal values of series resistances of the graded p-and n-type DBR mirrors and the lateral temperature-dependent resistance variation are calculated and discussed.The result indicates the potential to optimize the design of the DBR reflectors of the 980-nm VCSELs.展开更多
A 1040 nm tapered laser with tapered distributed Bragg reflector(DBR) grating is designed and fabricated. By designing the grating with tapered layout, the tapered DBR grating exhibits the scattering effect on side ba...A 1040 nm tapered laser with tapered distributed Bragg reflector(DBR) grating is designed and fabricated. By designing the grating with tapered layout, the tapered DBR grating exhibits the scattering effect on side backward-traveling waves, thus achieving additional suppression of parasitic oscillation. Under the suppression of parasitic oscillation, the spatial and spectral characteristics of the tapered laser are improved. The experimental results show that a near-Gaussian far-field distribution and a kink-free P–I characteristics are achieved, and a single peak emission with a wavelength of1046.84 nm and a linewidth of 56 pm is obtained.展开更多
In this paper, multilayer antireflection coatings are designed by modifying the thickness of two and three paired layer distributed Bragg reflector （DBR） structure. Our proposed DBR-based structures show antireflect...In this paper, multilayer antireflection coatings are designed by modifying the thickness of two and three paired layer distributed Bragg reflector （DBR） structure. Our proposed DBR-based structures show antireflection behaviors, in spite of the reflection treatment in traditional DBR structures. Firstly, the proposed structures are designed to be equivalent to the theoretical ideal triple-layer （TL） antireflection coating （ARC）. Therefore, the problem of finding a suitable material for the middle layer of triple structure is solved. Simulation results show the significant equivalency for the reflectance of proposed structures to the ideal TL ARC at the same wavelengths and incident angles. Also, the design of the structure is changed in order to present the constant reflectance coefficient over a wide range of wavelengths. This structure enhances the omni-directionality of the multilayer ARC.展开更多
Transverse localization of the optical Tamm plasmon （OTP） is studied in a metal-distributed Bragg reflector （DBR） structure with a one-dimensional disordered layer embedded at the interface between the metal and t...Transverse localization of the optical Tamm plasmon （OTP） is studied in a metal-distributed Bragg reflector （DBR） structure with a one-dimensional disordered layer embedded at the interface between the metal and the DBR. The embed- ded disordered layer induces multiple scattering and interference of light, forming the light localization in the transverse direction. This together with the formation of Tamm plasmonic modes at the metal-DBR interface （i.e., the confinement of light in the longitudinal direction）, gives birth to the so called transverse-localized Tamm plasmon. It is shown that for both transverse electric （TE） and transverse magnetic （TM） polarized light injection, the excited transverse-localized Tamm plas- mon broadens and splits the dispersion curve due to spatial incoherence in the transverse direction, thus proving the stronger light confinement especially in the TE polarized injection. By adding the gain medium, specific random lasing modes are observed. The proposed study could be an efficient way of trapping and locally enhancing light on a subwavelength scale, which is useful in applications of random lasers, optical sensing, and imaging.展开更多
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 60736036 and 61021003)the National Basic Research Program of China (Grant No. 2011CB301702)
文摘We report a monolithic integrated dual-wavelength laser diode based on a distributed Bragg reflector （DBR） composite resonant cavity. The device consists of three sections, a DBR grating section, a passive phase section, and an active gain section. The gain section facet is cleaved to work as a laser cavity mirror. The other laser mirror is the DBR grating, which also functions as a wavelength filter and can control the number of wavelengths involved in the laser action. The reflection bandwidth of the DBR grating is fabricated to have an appropriate value to make the device work at the dual-wavelength lasing state. We adopt the quantum well intermixing （QWI） technique to provide low-absorption loss grating and passive phase section in the fabrication process. By tuning the injection currents on the DBR and the gain sections, the device can generate 0.596 nm-spaced dual-wavelength lasing at room temperature.
基金Supported by the National Key Basic Research Program of China under Grant No 2013CB922304the National Natural Science Foundation of China under Grant Nos 11474275 and 11464034
文摘We investigate metallic microdisk-size dependence of quantum dot （QD） spontaneous emission rate and micro- antenna directional emission effect for the hybrid metM-distributed Bragg reflector structures based on a particular single QD emission. It is found that the measured photolumineseence （PL） intensity is very sensitive to the size of metMlic disk, showing an enhancement factor of 11 when the optimal disk diameter is 2μm and the numerical aperture of microscope objective NA=0.5. It is found that for large metal disks, the Purcell effect is dominant for enhanced PL intensity, whereas for small size disks the main contribution comes from plasmon scattering at the disk edge within the light cone collected by the microscope objective.
基金Project supported by the National Natural Science Foundation of China (Grant No. 10974012)
文摘The resistance characteristics of a continuously-graded distributed Bragg reflector（DBR） in a 980-nm verticalcavity surface-emitting laser（VCSEL） are modeled in detail.The junction resistances between the layers of both the p-and n-DBR mirrors are analysed by combining the thermionic emission model and the finite difference method.In the meantime,the intrinsic resistance of the DBR material system is calculated to make a comparison with the junction resistance.The minimal values of series resistances of the graded p-and n-type DBR mirrors and the lateral temperature-dependent resistance variation are calculated and discussed.The result indicates the potential to optimize the design of the DBR reflectors of the 980-nm VCSELs.
基金Project supported by Jilin Science and Technology Development Plan,China(Grant Nos.20210201030GX and 20190302052GX)。
文摘A 1040 nm tapered laser with tapered distributed Bragg reflector(DBR) grating is designed and fabricated. By designing the grating with tapered layout, the tapered DBR grating exhibits the scattering effect on side backward-traveling waves, thus achieving additional suppression of parasitic oscillation. Under the suppression of parasitic oscillation, the spatial and spectral characteristics of the tapered laser are improved. The experimental results show that a near-Gaussian far-field distribution and a kink-free P–I characteristics are achieved, and a single peak emission with a wavelength of1046.84 nm and a linewidth of 56 pm is obtained.
文摘In this paper, multilayer antireflection coatings are designed by modifying the thickness of two and three paired layer distributed Bragg reflector （DBR） structure. Our proposed DBR-based structures show antireflection behaviors, in spite of the reflection treatment in traditional DBR structures. Firstly, the proposed structures are designed to be equivalent to the theoretical ideal triple-layer （TL） antireflection coating （ARC）. Therefore, the problem of finding a suitable material for the middle layer of triple structure is solved. Simulation results show the significant equivalency for the reflectance of proposed structures to the ideal TL ARC at the same wavelengths and incident angles. Also, the design of the structure is changed in order to present the constant reflectance coefficient over a wide range of wavelengths. This structure enhances the omni-directionality of the multilayer ARC.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61575040 and 61635005)the 111 Project,China(Grant No.B14039)
文摘Transverse localization of the optical Tamm plasmon （OTP） is studied in a metal-distributed Bragg reflector （DBR） structure with a one-dimensional disordered layer embedded at the interface between the metal and the DBR. The embed- ded disordered layer induces multiple scattering and interference of light, forming the light localization in the transverse direction. This together with the formation of Tamm plasmonic modes at the metal-DBR interface （i.e., the confinement of light in the longitudinal direction）, gives birth to the so called transverse-localized Tamm plasmon. It is shown that for both transverse electric （TE） and transverse magnetic （TM） polarized light injection, the excited transverse-localized Tamm plas- mon broadens and splits the dispersion curve due to spatial incoherence in the transverse direction, thus proving the stronger light confinement especially in the TE polarized injection. By adding the gain medium, specific random lasing modes are observed. The proposed study could be an efficient way of trapping and locally enhancing light on a subwavelength scale, which is useful in applications of random lasers, optical sensing, and imaging.
