期刊文献+

保护渣成分对结晶矿相的影响 被引量:24

Effect of Compositions of Mold Flux on Crystalline Phase
在线阅读 下载PDF
导出
摘要 熔融保护渣在MoSi2高温电阻炉内以2℃/min降温速率冷却至室温,制成薄片,采用岩相显微镜分析保护渣的结晶矿相·结果表明:在本实验条件下,结晶矿相主要有枪晶石,硅灰石,黄长石,个别渣样有霞石,萤石,橄榄石;增大保护渣碱度,能促进保护渣结晶;随着渣中CaF2,Na2O,K2O和Li2O质量分数的增大,保护渣结晶化率增大;随着渣中Al2O3,MgO,BaO和MnO质量分数的增大,保护渣结晶化率减小· Mold flux films were made after molten slag was cooled to room temperature in graphite crucible at 2℃/min in MoSi_2 high temperature resisting furnace, and the crystalline phases were analysed by petrographic microscope. The results showed that: ①the crystalline phases are mainly the cuspidine, wollastonite and gehlenite with nepheline, fluorite and olivine also found in some samples under the experimental conditions; ②with the bacisity and CaF_2 content increased, crystalline proportion of mold flux rises with the cuspidine growing, thus the fluorite comes into being with more CaF_2; ③Na_2O accelerates the nepheline to come into being; ④the crystalline portion of mold flux increases with the increasing mass fractions of Li_2O, Na_2O and K_2O with the cuspidine growing; ⑤with more MgO found, the form of cuspidine is restrained with wollastonite growing; ⑥with more Al_2O_3 found, the form of cuspidine is restrained with nepheline growing; ⑦the crystalline proportion lowers with the increasing mass fractions of BaO and MnO.
出处 《东北工学院学报》 EI CSCD 北大核心 2004年第6期559-562,共4页
基金 国家自然科学基金资助项目(50204005)
关键词 保护渣 结晶矿相 霞石 枪晶石 结晶化率 薄片 渣膜 连铸 mold flux film crystalline phase crystalline proportion cuspidine nepheline.
  • 相关文献

参考文献11

  • 1Branion R V. Mold fluxes for continuous casting[J]. Iron kand Steel Maker, 1986,13(9) :41 - 49.
  • 2Lanyi M D, Rosa C J. Casting fluxes: physical properties affecting strand lubrication [ J ]. lrommking and Steelmaking, 1982,9 ( 1 ) : 25 - 31.
  • 3Talor R, Mills K C. Physical properties of casting powders:part 3, thermal conductivities of casting powders [ J ].lromaking and Steelmaking, 1988,15(4) : 187 - 194.
  • 4Watanabe K, Suzuki M, Murakami K, et al. Mold flux developments for high speed slab casting[ A]. Steelmaking Gmference Proceedings [ C]. Pittsburgh: ISS, 1996. 265 -268.
  • 5Moore J A, Camino C, Diehl S, et al. Mold flux developments for high speed slab casting [ A]. Steelmaking Conference Proceedings [ C ]. Pittsburgh: ISS, 1996. 259 -264.
  • 6Pinheiro C A, Samarasekera I V, Brimacombe J K, et al.Mold heat transfer and continuously cast billet quality with mould flux lubrication [ J ]. Irtmmaking and Steelmaking,2000,27( 1 ) : 37 - 54.
  • 7Lu M J, Lin K J, Kuo C H, et al. Sticker breakout theory and its predication in slab continuous casting [ A ].Steelmaking Conference Proceedings [ C ]. Dallas: ISS,1993. 343 - 353.
  • 8Cho J W, Emi T, Shibata H, et al. Heat transfer across mold flux film in mold during initial solidification in continuous casting of steel [ J ]. ISIJ, 1998, 38 (8) : 834-842.
  • 9Kawamoto M, Nakajima K, Kanazawa T, et al. Design principles of mold powder for high speed continuous casting[J]. ISIJ, 1994,34(7) :593 - 598.
  • 10刘承军,姜茂发.CaO-SiO_2-Na_2O-CaF_2-Al_2O_3-MgO渣系的粘度和结晶温度[J].东北大学学报(自然科学版),2002,23(7):656-659. 被引量:15

二级参考文献1

  • 1饶东生.硅酸盐物理化学[M].北京:冶金工业出版社,1980.84-88.

共引文献28

同被引文献230

引证文献24

二级引证文献74

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部