期刊文献+

WCB/HNBR/NBR耐热密封复合材料的制备与性能研究 被引量:4

Preparation and property of WCB/HNBR/NBR heat-resisting sealing composite
在线阅读 下载PDF
导出
摘要 通过直接共混法制备了白炭黑/氢化丁腈橡胶/丁腈橡胶(WCB/HNBR/NBR)耐热密封复合材料,研究了不同HNBR/NBR共混比、不同硫化体系对复合材料力学性能、压缩永久变形、耐油性能、耐热性能的影响。结果表明,当WCB/HNBR/NBR为30/25/75,在过氧化物/硫磺的共硫化体系下,复合材料综合性能最好,硬度、拉伸强度、压缩永久变形、150℃热空气老化后拉伸强度、浸油后体积变化率分别为58(邵A)、20.97MPa、12%、6.92MPa、11%;随着HNBR用量的增加,复合材料的耐热性能提高,而耐油性和压缩永久变形变化不大;在过氧化物/硫磺的共硫化体系下,复合材料的耐热性、耐油性、压缩永久变形、力学性能都较优异。 The heat-resisting sealing composites of white carbon black(WCB)/hydrogenated nitrile rubber(HNBR)/nitrile rubber(NBR)was prepared by mechanical blending method,and effects of different HNBR/NBR blend ratio,different curing systems on the mechanical properties,compression set,oil resistance,heat resistance(150℃)of the composites were studied.The results showed that,when the WCB/HNBR/NBR blend rate was 30/25/75,curing system was peroxide/sulfur,the properties of composites were the best.Its hardness,tensile strength,compression set,tensile strength after hot air aging test,and volume change rate after immersion oil were 58(share A),20.97 MPa,12%,6.92 MPa,11%respectively.As the increase of the amount of HNBR,the heat resistance was improved,and the oil resistance and compression set had a little chang.The heat resistance,oil resistance,compression permanent set and mechanical properties of the composites by cocuring system of peroxide/sulfur were excellent.
作者 张兆红 李培培 邢立华 袁霄宇 Zhang Zhaohong;Li Peipei;Xing Lihua;Yuan Xiaoyu(Xuzhou College of Industrial Technology,Xuzhou 221140)
出处 《化工新型材料》 CAS CSCD 北大核心 2019年第9期66-69,73,共5页 New Chemical Materials
基金 江苏高校品牌专业建设工程资助项目(PPZY2015B181) 江苏徐州市级课题(KC18153)
关键词 白炭黑 氢化丁腈橡胶 丁腈橡胶 耐热密封复合材料 white carbon black hydrogenated nitrile rubber nitrile rubber heat-resistant sealing composite material
作者简介 张兆红(1969-),女,硕士,副教授,主要从事高分子材料性能研究。
  • 相关文献

参考文献8

二级参考文献25

  • 1郑长伟.氢化丁腈橡胶[J].合成橡胶工业,1995,18(1):43-46. 被引量:9
  • 2王作龄.丁腈橡胶和氢化丁腈橡胶(一)[J].世界橡胶工业,2005,32(9):7-11. 被引量:11
  • 3张庆虎.朗盛(LANXESS)公司氢化丁腈橡胶的技术特性及其应用[J].世界橡胶工业,2005,32(12):8-14. 被引量:6
  • 4谢遂志 刘登祥 周鸣峦.橡胶工业手册第1分册[M].北京:化学工业出版社,1989.174-212.
  • 5纪奎江.实用橡胶制品生产技术[M].北京:化学工业出版社,1998.156.
  • 6王忠光.硫化与性能测试[M].北京:化学工业出版社,2005.
  • 7梁星宇,周木英,等.橡胶工业手册第三分册(修订版)[M].北京:化学工业出版社,2002.
  • 8[1]Wrana C,Reinartz K,Winkelbach HR.Therban(R)--the high performance elastomer for the new millennium[J].Macromol.Mater.Eng.,2001,286(11):657-662.
  • 9[3]王小萍.机械混炼原位反应插层法天然橡胶/蒙脱土纳米复合材料的研究[D].广州:华南理工大学,2005.
  • 10[6]Bourbigot S B,Gilman J W,wilkie C A.Kinetic analysis of the thermal degradation of polystyrene-montmorillonite nanocomposite[J].Polym.Degrad.Stab.,2004,84(3):483-492.

共引文献58

同被引文献57

引证文献4

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部