期刊文献+

腐蚀后自攻螺钉连接件力学性能研究

Study of mechanical properties of self-tapping screw joints after corrosion
原文传递
导出
摘要 本文研究腐蚀对自攻螺钉连接件强度退化的影响。模拟海洋大气环境,进行自攻螺钉连接件腐蚀试验,探究螺钉直径、螺钉数量和钢板厚度对连接件在腐蚀周期下的力学性能。研究结果表明,单颗螺钉连接件强度退化主要因素为腐蚀程度,两颗螺钉连接件强度退化主要因素为板材厚度,四颗螺钉连接件强度退化主要影响因素为螺钉直径。其中,四颗螺钉连接件腐蚀后的力学性能最优,采用最大直径尺寸螺钉,其腐蚀后增益作用明显,建议优先考虑应用。 This paper investigates the impact of corrosion on the strength degradation of self-tapping screw connections.Corrosion tests on self-tapping screw connections were conducted in a simulated marine atmospheric environment to explore the mechanical properties of screw diameter,number of screws,and plate thickness on the connections under corrosion cycles.The research findings demonstrate that the primary factor contributing to strength degradation of single screw connections is the corrosion degree,while for two screw connections,it is the thickness of the plate,and for four screw connections,it is the screw diameter.Notably,four screw connections exhibit optimal mechanical properties after corrosion,with the use of the largest diameter size screw resulting in a significant gain effect,thus recommending its prioritized application.
作者 高鹏 吴曼 陈明 GAO Peng;WU Man;CHEN Ming(Inner Mongolia University of Science and Technology,College of Civil Engineering,Inner Mongolia,Baotou,014010,China;Inner Mongolia University of Science and Technology,Key Laboratory of Civil Engineering Safety and Durability in Inner Mongolia Autonomous Region,Inner Mongolia,Baotou,014010,China;Inner Mongolia University of Science and Technology,Engineering Technology Research Centre for Disaster Prevention and Mitigation of Building Structures in Inner Mongolia Autonomous Region,Inner Mongolia,Baotou,014010,China)
出处 《中国科学与技术学报》 2025年第1期161-171,共11页
基金 国家自然科学基金项目(52168024) 内蒙古科技大学建筑科学研究所开放基金项目(JYSJJ-2021M03)。
关键词 薄壁型钢 螺钉连接 盐雾腐蚀 力学性能 Thin-walled steel sections Screw connections Salt spray corrosion Mechanical properties
作者简介 第一作者:高鹏(1979-),男,博士,副教授,研究方向:钢结构。E-mail:gaop182@163.com;通讯作者:陈明(1978-),男,博士,教授,研究方向:钢结构和空间结构的设计与理论研究。E-mail:cmlx-1978@163.com。
  • 相关文献

参考文献5

二级参考文献39

  • 1钟国辉.冷弯薄壁型钢在房屋建筑中的研究与发展[J].建筑钢结构进展,2002,4(4):31-38. 被引量:23
  • 2潘景龙.自攻螺钉连接的抗剪性能研究[J].哈尔滨建筑大学学报,1995,28(6):41-47. 被引量:31
  • 3[1]BS5950: Structural use of steelwork in buildings. Part 5 Code of practice for the design of cold-formed sections, British Standards Institution, London 1998
  • 4[2]Eurocode 3: Design of steel structures. Part 1.3:General rules-Supplementary rules for cold-formed thin gauge members and sheeting, ENV 1993-1-3,European Committee for StandardizationResearch and Development on Building Construction Using Cold-formed Steel Sections
  • 5[3]Cold-formed steel structure code AS/NZ 4600:1996,Standards Australia/Standards New Zealand, Sydney, 1996
  • 6[4]Specification for the design of cold-formed steel structural members, American Iron and Steel Institute, Washington DC,1996
  • 7[5]Chung, K. F.: Structural performance of cold-formed sections with single and multiple web openings-Experimental investigation, the Structural Engineer, Volume 73, Number 9,May 1995, pp141-149
  • 8[6]Chung, K. F.: Structural performance of cold-formed sections with single and multiple web openings - Design rules, the Structural Engineer, Volume 73, Number 14, July 1995,pp223-228
  • 9[7]Chung, K.F. and St Quinton D. Structural performance of modern roofs with thick over-purlin insulation-experimental investigation, Journal of Constructional Steel Research,Volume 40, Number 1, Oct. 1996, pp17-38
  • 10[8]Chung, K.F. and Lawson, R. M.: Structural performance of shear connections among cold-formed steel members using web cleats of cold-formed steel strips, Engineering Structures,Volume 22, Number 10, Oct.2000, pp1350-1366

共引文献197

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部