期刊文献+

HXD21000系机车主变流柜门过滤网改造分析

Analysis of Main Converter Cabinet Door Filter Modification in HXD21000-Series Locomotives
在线阅读 下载PDF
导出
摘要 通过介绍HXD21000机车出现的变流柜柜门过滤网故障现象,目前采取的措施主要有拆除变流柜上过滤网中的滤棉和对牵引变流器盖板绝缘优化,但未彻底解决此问题。针对主变流过滤网的缺陷,提出对过滤网的过滤棉进行材质更换和增加栅格板设计从而达到不会因为模块等故障而导致着火事故的发生,对过滤网重新设计后,通过对栅格板的强度分析、整柜温升仿真和试验验证,其中试验结果表明采用现车改装后过滤器装双层栅格绝缘板,过滤器中装阻燃过滤棉的方案,满足柜体温升要求,试验方案和仿真结果基本一致,达到预期目的。 Through the introduction of the HXD21000 locomotive appeared in the converter cabinet door filter mesh failure phenomenon,the current measures are mainly taken to remove the filter cotton in the filter mesh on the converter cabinet and optimise the insulation of the cover plate of the traction converter,but completely solve this problem.In view of the defects of the main converter filter,the proposed filter cotton on the filter for material replacement and increase the grid plate design so as to achieve the module and other faults will not lead to the occurrence of fire accidents,after the redesign of the filter,through the strength analysis of the grid plate,the whole cabinet temperature rise simulation and experimental validation,in which the experimental results show that the use of the current car modified filter installed after the double-layer grid insulating panels,filters installed in the fire-retardant filter cotton programme,to meet the cabinet temperature rise,the cabinet can be used for the filter.The test results show that using the modified filter with double-layer grid insulating board and flame retardant filter cotton in the filter meets the temperature rise requirement of the cabinet,and the test programme and simulation results are basically consistent and achieve the expected purpose.
作者 邢亮 Xing Liang(CNR Datong Electric Locomotive Co.,Ltd.,Datong Shanxi 037038,China)
出处 《机械管理开发》 2025年第3期147-149,共3页 Mechanical Management and Development
关键词 变流柜过滤网 栅格板 温升试验与仿真 converter cabinet filter grid plate temperature rise test and simulation
作者简介 邢亮(1985-),男,山西原平人,本科,毕业于太原理工大学电子信息工程专业,高级工程师,从事机车设计工作。
  • 相关文献

参考文献3

二级参考文献25

  • 1刘衍平,高新霞.大功率电子器件散热系统的数值模拟[J].电子器件,2007,30(2):608-611. 被引量:24
  • 2韩冬,何闻.基于ANSYS的大功率晶体管散热器的研究[J].机电工程,2007,24(1):10-12. 被引量:7
  • 3Karacs G. Computer aided methods for mould design. Proceedings of the Conference on Mechanical Engineering Technical of Budapest, 1998,2:463~466.
  • 4Mueller, Guenter, Petere Lin. Design optimization with the finite element program ANSYS. International Journal of Computer Applications in Technology, 1994,7: 271 ~ 277.
  • 5CHEN JinYi, CAI GuoZhong. The computer aided engineering analysisANSYS users'guide Beijing:Railway Publishers,2001(In Chinese)(陈精一,蔡国忠.电脑辅助工程分析--ANSYS使用指南.北京:中国铁道出版社,2001).
  • 6WANG GuoQiang. Practical engineering digital simulation technology and its practice at ANSYS. Xi′an: Westnorth Technology University Press, 1999(In Chinese)(王国强.实用工程数值模拟技术及其在ANSYS上的实践.西安:西北工业大学出版社,1999).
  • 7ZHANG BaoChang. Non-ferrous metal and its heat treatment. Xi′an: Westnorth Technology University Press,1993(In Chinese)(张宝仓.有色金属及其热处理.西安:西北工业大学出版社,1993).
  • 8JIA XianAn, HU JiuXi. Hot extrusion technics and die design. Beijing:Mechanical Industrypress,1986(In Chinese)(贾宪安,胡九锡.热挤压工艺与模具设计.北京:机械工业出版社,1986).
  • 9葛隽,何闻.晶体管水冷散热器的热分析及仿真研究[J].机床与液压,2008,36(5):161-164. 被引量:13
  • 10牛永红,刘宗攀,庞赟佶.CPU芯片水冷散热器的数值模拟与分析[J].化工进展,2010,29(S1):653-655. 被引量:16

共引文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部