期刊文献+

铅基多元合金阳极板晶粒晶界优化性能研究 被引量:1

Study on Grain Boundary Optimization of Lead-based Multicomponent Alloy Anode Plate
在线阅读 下载PDF
导出
摘要 铅钙银基三元及多元合金板在降低吸氧电位、耐腐蚀及抗蠕变性能方面表现出较明显的优势,且可降低极板中银使用量40%左右,但在使用过程中也存在极板易变形、电流效率衰减快、极板寿命短等问题,严重制约了多元合金板的推广应用。通过对Pb-Ag-Ca-Sr-La多元合金阳极板进行晶粒晶界优化,使其抗拉强度提升5.26%,硬度提升7.03%,导电率提升6.25%,制备出抗变形、电流效率稳定,且更适合高酸、高杂质、高电流密度电解工艺的多元合金板。 Pb-Ca-Ag based ternary and multicomponent alloy plates show obvious advantages in reducing oxygen absorption potential,corrosion resistance and creep resistance,and can reduce the amount of silver used in plates by about 40%,but there are also problems in using,such as easy deformation of plate,fast decay of electrical efficiency,and short life of plate,which seriously restrict the popularization and application of multicomponent alloy plates.By optimizing the grain boundary of Pb-Ag-Ca-Sr-La multicomponent alloy anode plate,the tensile strength,hardness and conductivity of Pb-Ag-Ca-Sr-La multicomponent alloy anode plate are increased by 5.26%,7.03%and 6.25%,respectively,the multicomponent alloy anode plates with good deformation resistance and stable electrical efficiency are prepared,which is more suitable for high acidity,high impurity and high current density electrolysis process.
作者 李玉章 李雨耕 包稚群 冯炜光 张永平 雷华志 孙彦华 LI Yuzhang;LI Yugeng;BAO Zhiqun;FENG Weiguang;ZHANG Yongping;LEI Huazhi;SUN Yanhua(Kunming Metallurgy Research Institute Company Limited,Kunming 650031,China;State Key Laboratory of Advanced Metallurgy for Non-ferrous Metals,Kunming 650031,China)
出处 《有色金属(冶炼部分)》 CAS 北大核心 2023年第12期54-58,共5页 Nonferrous Metals(Extractive Metallurgy)
基金 云南省科技创新基地建设项目(202307AB110004) 中国铜业有限公司重点科技计划项目(20200601)。
关键词 Pb-Ag-Ca-Sr-La多元合金 晶粒 晶界 耐腐蚀 强度 电流效率 Pb-Ag-Ca-Sr-La multicomponent alloy grain grain boundary corrosion resistance strength current efficiency
作者简介 李玉章(1982-),男,硕士,高级工程师;通信作者:冯炜光(1981-),男,硕士,高级工程师。
  • 相关文献

参考文献7

二级参考文献83

  • 1徐瑞东,盘茂森,郭忠诚.锌电积用惰性阳极材料的研究现状[J].电镀与环保,2005,25(1):4-7. 被引量:15
  • 2陈善华,吴杰,管登高,邹丛沛,邱绍宇.金属材料晶界工程研究进展[J].金属热处理,2006,31(3):1-6. 被引量:19
  • 3Albert W A J. Arch Mineral, Geognosie, Bergbau Huttenkunde, 1838; 10:215.
  • 4Ewing J A, Humfrey J C. Philos Trans R Soc London, 1903, 200A: 241.
  • 5Schmid E, Boas W. Plasticity of Crystals. London: Chapman and Hall, 1968:1.
  • 6Seeger A. Dislocation and Mechanical Properties of Crystals. New York: John Wiley, 1957:1.
  • 7Honeycombe R W K. Plastic Deformation of Metals. London: Cambridge Press, 1969:1.
  • 8Klesnil M, Lukas P. Fatigue of Materials. 3rd Ed., Amsterdam: the Netherlands, 1992:1.
  • 9Thompson N, Wadsworth N J, Louat N. Philos Mag, 1956; 1:113.
  • 10Essmann U, Gosele U, Mughrabi H. Philos Mag, 1981; 44: 405.

共引文献42

同被引文献12

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部