摘要
基于减阻涂层易工程应用的优势和高聚物优异的湍流减阻性能,研发复合高聚物减阻涂层,在船舶及水下航行器领域应用前景将非常广阔,而目前这方面的研究仍相对缺乏.为此,本文基于PAM和PEO减阻剂制备国产自抛光漆复合涂层,通过水下平板阻力测试实验系统研究了涂层种类、主流流速、PAM/PEO浓度对减阻的影响规律,并对复合涂层表面粗糙度进行分析.结果表明:高分子-自抛光漆复合涂层具有减阻效果,采用单面减阻涂层最大实现9.4%的减阻;流速在0.5~1.8 m/s变化时不会显著改变减阻率,减阻率变化不超过3.5%;随着涂层中高聚物浓度的增大,自抛光漆-PAM涂层减阻率先增大后减小,自抛光漆-PEO涂层减阻率先保持平稳后迅速下降;当涂层中高聚物浓度超过某一临界值时都出现了减阻率下降甚至增阻现象,其原因为涂层表面粗糙度增大及溶液黏度变化.本工作可为高聚物减阻涂层的工程化应用提供参考.
Based on the advantages of the drag reduction coating(easy engineering application)and the polymer(excellent turbulent drag reduction performance),the development of composite polymer drag reduction coating would have a broad application prospect in the field of ships and underwater vehicles,but there is still a relative lack of research in this field.Thus,the present work prepared domestic self-polishing paint composite coatings based on PAM and PEO drag reducing agents,and investigated the influence of coating types,flow velocity and PAM/PEO concentration on the drag reduction performance through the underwater plate resistance test,and surface roughness.The results showed that polymer-self-polishing paint composite coating has drag reduction effect,which can produce 9.4% drag reduction by using single-sided drag reduction coating;Flow velocity variations have a little influence on the drag reduction rate,and the induced variation of the drag reduction rate was smaller than 3.5%;When increasing the polymer concentration,the drag reduction rate of self-polishing paint-PAM coating first increased and then decreased,while the drag reduction rate of self-polishing paint-PEO coating first kept stable and then decreased rapidly;When the polymer concentration exceeded a certain critical value,the drag reduction rate decreased,and the coating even increased the flow drag.This is because the surface roughness of the coating increased and the viscosity of the solution changed when adding too many polymers.This work would provide supports for the engineering application of polymer drag reduction coating.
作者
刘浩
谢络
姚博仁
孙孟舸
胡海豹
Liu Hao;Xie Luo;Yao Boren;Sun Mengge;Hu Haibao(School of Marine Science and Technology,Northwestern Polytechnical University,Xi’an 710072,China;Chongqing Science and Technology Innovation Center,Northwestern Polytechnical University,Chongqing 401135,China;Kunming Shipping Equipment Co.,Ltd.,Kunming 650051,China)
出处
《力学学报》
EI
CAS
CSCD
北大核心
2023年第6期1228-1235,共8页
Chinese Journal of Theoretical and Applied Mechanics
基金
国家自然科学基金(12102358,52071272)
中央高校基本科研业务费专项资金(3102021HHZY030008)
中国博士后科学基金(2021M692617)
重庆市自然科学基金(cstc2021jcyj-msxmX0393)
陕西省科学技术协会青年人才托举计划(20220512)资助项目。
关键词
高分子-自抛光漆
复合涂层
涂层减阻
表面粗糙度
polymer-self-polishing paint
composite coating
coating drag reduction
surface roughness
作者简介
通讯作者:谢络,副教授,主要研究方向为水下仿生减阻.E-mail:xieluo@nwpu.edu.cn。
