摘要
使用Fluent软件对注塑机螺杆均化段的流场进行三维数值模拟,分析了不同螺杆转速下流道内PP熔体温度、速度、表观黏度、塑化能力的变化。从分析结果发现,随着螺杆转速的增加,均化段出口速度增加,温度降低,表观黏度增大,温度和表观黏度均匀性下降。将模拟仿真的表观黏度代入理论塑化能力公式,并通过实验分析实际塑化能力和理论塑化能力的差异。
Three-dimensional numerical simulation of the flow field in the homogenization section of the screw of the injection molding machine is carried out using Fluent software.The changes of PP melt temperature,speed,apparent viscosity,and plasticizing ability in the runner under different screw rotations are discussed and analyzed.It is found that the screw speed increases,the outlet speed of the homogenization section increases,the temperature decreases,the apparent viscosity increases,and the uniformity of temperature and apparent viscosity decreases.Through the simulation,the apparent viscosity is substituted into the theoretical plasticizing ability formula.The difference between actual plasticizing ability and theoretical plasticizing ability is analyzed through experiments.
作者
刘阔
王立强
张邵恒
LIU Kuo;WANG Liqiang;ZHANG Shaoheng(College of Mechanical and Power Engineering,Shenyang University of Chemical Technology,Shenyang 110142,China)
出处
《机械工程师》
2022年第7期88-90,共3页
Mechanical Engineer
关键词
熔体温度
表观黏度
塑化能力
melt temperature
apparent viscosity
plasticizing ability
作者简介
刘阔(1995—),男,硕士研究生,研究方向为材料工程工艺与优化;王立强(1969—),男,副教授,硕士生导师,主要研究方向为高分子材料与加工。
