摘要
研究了单道次皮尔格轧制过程中Ti-2Al-2.5Zr材料的变形行为和织构的演变规律。结果表明,在轧制过程中,■孪晶和柱面滑移是最容易被激活的2种变形模式,■孪晶的产生使得晶粒在轴向上的位向从■转向■。并且,在不同瞬时Q值和等效应变量下,滑移和孪生导致{0001}极图中最大极密度点在切向上发生变化。
The evolution of deformation behavior and microtexture in one pass cold Pilgering process was investigated.Results show that during cold Pilgering,the■tensile twin and prismatic slip are the two modes that are most easily activated.The activated■tensile twins cause the grain orientation changes in axial directions,which changes from■to■.The maximum intensity point of{0001}pole figure changes along the TD,which is attributed to twinning and slip under different transient Q-value and equivalent plastic strain.
作者
吴军
王理
刘肖
廖京京
王辉
Wu Jun;Wang Li;Liu Xiao;Liao Jingjing;Wang Hui(Science and Technology on Reactor Fuel and Materials Laboratory,Nuclear Power Institute of China,Chengdu 610213,China)
出处
《稀有金属材料与工程》
SCIE
EI
CAS
CSCD
北大核心
2022年第4期1145-1151,共7页
Rare Metal Materials and Engineering
基金
Sichuan Science and Technology Program(2019ZDZX0001)。
关键词
钛合金
织构
皮尔格冷轧
孪晶
变形模式
titanium alloy
texture
cold Pilgering
twining
deformation mode
作者简介
吴军,男,1991年生,博士生,中国核动力研究设计院反应堆燃料及材料重点实验室,四川成都610213,电话:028-85903692,E-mail:wujunscu@163.com;Corresponding author:Wang Hui,Ph.D.,Professor,Science and Technology on Reactor Fuel and Materials Laboratory,Nuclear Power Institute of China,Chengdu 610213,P.R.China,E-mail:qinghe5525@163.com。
