期刊文献+

Measurement of stiffness and damping coefficient of rubber tractor tires using dynamic cleat test based on point contact model

原文传递
导出
摘要 The ride vibration of a tractor is affected mostly by the stiffness and damping coefficient of the seat suspension,cabin suspension,cabin rubber mounts,and rubber tires.However,in the case of rubber tractor tires,the stiffnesses and damping coefficients have not been researched adequately thus far,and it is not simple to measure these characteristics.In this study,a method for measuring and analyzing the stiffnesses and damping coefficients of rubber tractor tires,which were the input parameters for the tractor ride vibration simulation,was proposed.The cleat test,proposed in this study,did not require separate and complicated test equipment,unlike the conventional methods.The test was conducted simply by measuring acceleration under the driving conditions of the vehicle without detaching tires from the vehicle body or setting up additional test equipment.Based on the ground-vertical acceleration data obtained,the stiffness was calculated using the logarithmic decrement method,and the damping coefficient was calculated using least squares exponential curve fitting.The result of the cleat test indicated that the front tires had stiffnesses of 486.08-570.69 kN/m and damping coefficients of 4.02-4.52 kN·s/m;the rear tires had stiffnesses of 409.42-483.79 kN/m and damping coefficients of 2.21-2.67 kN·s/m.During the test,40 mm height cleats were installed on the track and the speed of the tractor was set to 7 and 10 km/h,which were the most common speeds during the operation.This study is meaningful in that it has presented a new method that improves the practicality of results,reduces cost,and simplifies the test process for measuring the stiffnesses and damping coefficients of rubber tractor tires.
出处 《International Journal of Agricultural and Biological Engineering》 SCIE EI CAS 2021年第1期157-164,共8页 国际农业与生物工程学报(英文)
基金 This research was supported by the Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(Grant No.2019R1F1A1059712).
作者简介 Hogil Yoo,Master candidate,research interest:agricultural machinery,Email:yoohokil@snu.ac.kr;Jooseon Oh,PhD candidate,research interest:agricultural machinery,Email:jsshock1@snu.ac.kr;Woo-Jin Chung,PhD candidate,research interest:agricultural machinery,Email:woojin729@snu.ac.kr;Hyun-Woo Han,Master candidate,research interest:agricultural machinery,Email:hho0203@snu.ac.kr;Ji-Tae Kim,Master candidate,research interest:soil machine system,Email:jitaekim10@snu.ac.kr;Yoonna Park,Master,research interest:agricultural machinery,Email:parkyn@tym.co.kr;Corresponding author:Young-Jun Park,PhD,Professor,research interest:agricultural machinery.Department of Biosystems&Biomaterials Science and Engineering,Seoul National University,Seoul,08826,Korea.Tel:+82-2-880-4602,Fax:+82-2-873-2049,Email:yjpark95@snu.ac.kr.
  • 相关文献

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部