摘要
挖掘机用斜盘式轴向柱塞泵经常出现柱塞"卡死"的现象,造成柱塞泵滑靴脱落,回程盘碎裂,使泵无法工作。为解决此问题,需研究柱塞与缸体的最佳配合间隙值。以排量112 mL/r的柱塞泵为例,利用ANSYS-Workbench软件对不同柱塞副间隙值的柱塞与缸体的压力变形、热变形和热力耦合变形进行仿真分析,研究不同的柱塞副间隙值对泵的容积效率的影响。通过分析提出柱塞与缸孔间隙的建议取值,通过试验验证,泵不会造成"卡死"现象,同时其容积效率可以达到96%~97%。此研究对不同斜盘式轴向柱塞泵柱塞副最佳间隙的选择提供了参考。
Plunger adhering phenomenon of the swashplate axial piston pump used in excavator often causes the piston pump slipper to fall off and return tray to break, which makes the pump unable to work.To solve this problem, it is necessary to study the optimum clearance between piston and cylinder block.Taking the piston pump with 112 mL/r displacement as an example, the pressure deformation, thermal deformation and thermo-mechanical coupling deformation of the cylinder block and piston with different piston pair clearance values were simulated and analyzed by ANSYS-Workbench software to study the influence of different piston pair clearance values on the volume efficiency of the pump.By analyzing, the recommended clearance value between piston and cylinder barrel was propose.It is proved by experiment that the pump will not cause "stuck" and its volumetric efficiency can reach 96%~97%.This study provides reference for choosing the best clearance of different swashplate axial piston pumps.
作者
张哲
童桂英
王立帮
常容川
王延杰
ZHANG Zhe;TONG Guiying;WANG Libang;CHANG Rongchuan;WANG Yanjie(School of Electrical and Mechanical Engineering,Yantai University,Yantai Shandong 264005,China)
出处
《机床与液压》
北大核心
2021年第10期38-42,共5页
Machine Tool & Hydraulics
基金
山东省重点研发计划项目(2018GGX104007)。
关键词
柱塞副配合间隙
有限元仿真
热力耦合
容积效率
Plunger pair clearance
Finite element simulation
Thermo-mechanical coupling
Volumetric efficiency
作者简介
张哲(1995-),男,硕士研究生,主要研究方向为液压元件及系统。E-mail:794226196@qq.com;通信作者:童桂英,E-mail:tongguiying2254@163.com。
