期刊文献+

孔径比和动量比对双股射流撞击式雾化影响分析 被引量:5

Analysis of impact on two jets impinging atomization under variable diameter and momentum ratios
在线阅读 下载PDF
导出
摘要 采用移动粒子半隐式(MPS)法和GPU并行加速技术,对双股射流撞击式雾化过程进行了数值模拟,分析了射流孔径比和动量比的变化对雾化特性参数的影响。模拟成功捕捉到了典型工况下一次雾化液膜破碎成液丝、液丝进一步破碎成液滴的全过程。获得了喷雾扩散角、液膜破碎长度、雾化液滴索特尔平均直径和雾场偏斜角等雾化特性参数。数值结果表明,孔径比的变化会引起雾场一定程度的偏斜,形成凹形液膜;动量比主要影响雾场的偏斜程度,动量比从1.0变化到2.0时,雾场偏斜角从0°增加到21°;孔径比和动量比的增大会引起喷雾扩散角的增大,但变化幅度较小;孔径比和动量比的增大都会使得液膜破碎长度和雾化液滴的索特尔平均直径增大。 The moving particle semi-implicit(MPS)method and GPU parallel acceleration technology were carried out to simulate the two jets impinging atomization.The influence of the change of jet diameter ratio and momentum ratio on the atomization characteristic parameters was analyzed.The simulations successfully capture the primary atomization process of liquid film breaking into liquid filaments,and further breaking liquid filaments into droplets under typical working conditions.Atomization characteristic parameters such as spray diffusion angle,liquid film break up length,atomization droplets Sauter mean diameter and atomization defective angle were numerically obtained.The numerical results show that the change of the diameter ratios causes the atomization field to be deflected to a certain extent and form hollow liquid film.The momentum ratio mainly affects deflection degree of the fog field.When momentum ratio changes from 1.0 to 2.0,the atomization defective angle increases from 0°to 21°.Increasing the diameter ratio and momentum ratio can lead to the increase of the spray diffusion angle,but which is not obvious.The increase of the diameter ratio and momentum ratio also lead to the increase of the liquid film breakup length and the droplets Sauter mean diameter.
作者 王宇奇 勾文进 陈明慧 张帅 郑耀 WANG Yuqi;GOU Wenjin;CHEN Minghui;ZHANG Shuai;ZHENG Yao(School of Aeronautics and Astronautics,Zhejiang University,Hangzhou 310027,China;Shanghai Aircraft Design and Research Institute,Shanghai 201210,China)
出处 《固体火箭技术》 EI CAS CSCD 北大核心 2021年第1期26-32,共7页 Journal of Solid Rocket Technology
关键词 双股射流 撞击雾化 移动粒子半隐式法 GPU加速 孔径比 动量比 two jets impinging atomization moving particle semi-implicit method GPU acceleration diameter ratio momentum ratio
作者简介 王宇奇(1996-),男,硕士生,研究方向为计算流体力学。E-mail:lanerra@zju.edu.cn;通讯作者:张帅(1977-),男,博士,副教授,研究方向为计算流体力学。E-mail:shuaizhang@zju.edu.cn。
  • 相关文献

参考文献11

二级参考文献100

  • 1张蒙正,陈炜,杨伟东,李军.撞击式喷嘴凝胶推进剂雾化及表征[J].推进技术,2009,30(1):46-51. 被引量:24
  • 2石少平,庄逢辰.射流撞击雾化索太尔平均直径的计算[J].推进技术,1995,16(3):22-25. 被引量:6
  • 3杨伟东,张蒙正.凝胶推进剂流变及雾化特性研究与进展[J].火箭推进,2005,31(5):37-42. 被引量:16
  • 4庄逢辰.液体火箭发动机喷雾燃烧的理论、模型及应用[M].长沙:国防科学技术大学出版社,1995.
  • 5YANGV.液体火箭发动机燃烧不稳定性[M].北京:科学出版社.2001.
  • 6Liu G R,Liu M B.光滑粒子流体动力学-一种无网格粒子法[M].韩旭,等译.长沙:湖南大学出版社,2005.
  • 7Larry C Liou,John W Dankanich,Leslie L Alexander.NASA In-soace Advanced Chemical Propulsion Development in Recent Years[R].AIAA 2009-5126.
  • 8Dickerson R A.Like and unlike Impinging Injection Element Droplet Sizes[J].J Spacecraft,V.6,N 11,1969.
  • 9Koshizuka S, Oka Y. Moving-particle semi-implicit method for fragmentation of incompressible fluid[J]. Nucl Sci Eng , 1996,123 :421-434.
  • 10Koshizuka S, Nobe A, Oka Y. Numerical analysis of breaking waves using the moving particle semi-im- plicit method[J]. Int J Meth Fluids, 1998,26: 751- 769.

共引文献71

同被引文献69

引证文献5

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部