期刊文献+

不同温度和应变率下的闭孔泡沫铝压缩力学性能 被引量:4

Compression performance of closed-cell aluminium foam under different temperatures and strain rates
在线阅读 下载PDF
导出
摘要 采用MTS和SHPB开展了准静态和动态压缩实验,研究了不同密度的闭孔泡沫铝在不同温度和应变率下的力学性能。实验结果表明:在准静态和动态条件下泡沫铝的压溃强度均随相对密度的增加而增大,且与相对密度变化呈幂指数关系;闭孔泡沫铝具有很强的温度软化效应,其压溃强度随温度的升高而降低,且与温度变化成线性关系;泡沫铝也具有明显的应变率敏感性,其压溃强度随应变率的升高而增大。拟合得到了闭孔泡沫铝压溃强度关于相对密度、温度以及应变率的经验型公式。 SHPB and MTS machine were employed to conduct quasi-static and dynamic compression tests to study mechanical performance of closed-cell aluminum foam with different densities under different temperatures and strain rates.The test results showed that the crushing strength of aluminum foam increases with increase in its relative density under quasi-static and dynamic conditions,the crushing strength has a power exponential relationship with the change of relative density;closed-cell aluminum foam has a very strong temperature softening effect,its crushing strength drops with increase in temperature and has a linear relationship with variation of temperature;aluminum foam has an obvious sensitivity to strain rate,its crushing strength increases with increase in strain rate.Finally,an empirical formula for crushing strength of closed-cell aluminum foam related to relative density,temperature and strain rate was obtained through fitting.
作者 李雪艳 李志斌 张舵 LI Xueyan;LI Zhibin;ZHANG Duo(College of Arts and Sciences,National University of Defense Technology,Changsha 410073,China)
出处 《振动与冲击》 EI CSCD 北大核心 2020年第23期17-20,29,共5页 Journal of Vibration and Shock
基金 湖南省自然科学基金(2017JJ3359,2020JJ3037)。
关键词 闭孔泡沫铝 力学性能 温度 应变率 压溃强度 closed-cell aluminum foam mechanical performance temperature strain rate crushing strength
作者简介 第一作者:李雪艳,女,硕士生,1991年生;通信作者:李志斌,男,博士,副教授,1985年生。
  • 相关文献

参考文献6

二级参考文献104

  • 1王二恒,虞吉林,王飞,孙亮.泡沫铝材料准静态本构关系的理论和实验研究[J].力学学报,2004,36(6):673-679. 被引量:22
  • 2Thomas T, Mahfuz H, Carlsson L A, et al. Dynamic compression of cellular cores: temperature and strain rate effects [ J]. Composite Structures, 2002, 58 (4) :505 - 512.
  • 3Song B, Lu W Y, Syn C J, et al. The effects of strain rate, density, and temperature on the mechanical properties of polymethylene diisocyanate (PMDI)-based rigid polyurethane foams during compression [ J ]. Journal of Materials Science, 2009, 44(2) :351 -357.
  • 4Williamson D M, Siviour C R, Proud W G, et al. Temperature time response of a polymer bonded explosive in compression ( EDC37 ) [ J ]. 3ournal of Physics D : Applied Physics, 2008, 41:085404.1 -055404.10.
  • 5Gibson L J, Ashby M F. Cellular solids: structure and properties, 2"d ed [ M ]. England: Cambridge UniversityPress, 1999.
  • 6Dannemann K A, James L J. High strain rate compression of closed-cell aluminium foams [ J ]. Materials Science and Engineering, 2000, 293(1 -2) :157 - 164.
  • 7Kanahashi H, Mukai T, Yamada Y, et al. Dynamic compression of an ultra-low density aluminium foam [ J ]. Materials Science and Engineering, 2000,280:349 - 353.
  • 8Mukai T, Miyoshi T, Nakano S, et al. Compressive response of a closed-cell aluminum foam at high strain rate [ J ]. Scripta Materialia, 2005, 54(4): 533-537.
  • 9Deshpande V S, Fleck N A. High strain rate compressive behaviour of aluminium alloy foams [ J ]. International Journal of Impact Engineering, 2000, 24 (3) :277 - 298.
  • 10Ruan D, Lu G, Chen F L, et al. Compressive behaviour of aluminium foams at low and medium strain rates [ J ]. Composite Structures, 2002, 57 ( 1 - 4) :331 - 336.

共引文献64

同被引文献40

引证文献4

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部